MES5312 циклическая перезагрузка после прошивки

[akhokhlov]

Добрый день!
После попытки обновления MES5312 mes5300-641-2R1.ros коммутатор уходит в циклическую перезагрузку.
До этого он был успешно обновлен до промежуточной прошивки 5.5.4.4 R16


BootROM 1.43
Booting from SPI flash


General initialization - Version: 1.0.0
Serdes initialization - Version: 1.0.2
PEX: pexIdx 0, detected no link
PEX: pexIdx 0, detected no link
PEX: pexIdx 0, detected no link
DDR3 Training Sequence - Ver TIP-1.55.0
DDR3 Training Sequence - Switching XBAR Window to FastPath Window
DDR3 Training Sequence - Ended Successfully
BootROM: Image checksum verification PASSED


ROS Booton: Jun 13 2018 17:16:12 ver. 1.0

Press x to choose XMODEM...
LAB mode enabled
Booting from SPI flash
Tuned RAM to 512M

Running UBOOT...
mvRolBanner debug:1 ECHO on mvRolLabMode: 1

_____ _ _
| ____| | |_ _____ __
| _| | | __/ _ \ \/ /
| |___| | || __/> <
|_____|_|\__\___/_/\_\
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__|
** LOADER **


U-Boot 2013.01 (Jul 13 2018 - 13:27:26)

mvRolInitParams: mvRolXmodemUsed = 0
mvRolInitParams: mvRolImageaddr = 0x1c000000
mvRolInitParams: mvRolLabMode = 1
Board: RD-LWS-12XG-AmvCtrlRevNameGet: Error: Failed to read Revision ID

SoC: BobK
running 2 CPUs
CPU: Marvell PJ4B (584) v7 (Rev 2) LE
CPU 0
CPU @ 0 [MHz]
L2 @ 200 [MHz]
TClock @ 200 [MHz]
DDR @ 0 [MHz]
DDR 64Bit Width, FastPath Memory Access, DLB Enabled
DDR ECC Disabled
DRAM: 512 MiB
NAND: 1024 MiB
MMC: MRVL_MMC: 0
SF: Detected MX25L25735E with page size 64 KiB, total 32 MiB
*** Warning - bad CRC, using default environment

PCI-e 0: Detected No Link.
FPU initialized to Run Fast Mode.
USB2.0 0: Host Mode

Map: Code: 0x1eca6000:0x1ed76668
BSS: 0x1edeffc0
Stack: 0x1f995ef0
Heap: 0x1f996000:0x1fea6000
U-Boot Environment: 0x00800000:0x00810000 (SPI)

fpga: board_id is 0xbe00
fpga: image 32189 bytes
fpga: reset nCONFIG...
error: nCONFIG not falling!
mvRolLateInit debug:1 mvRolLabMode:1
Net:
| port | Interface | PHY address |
|--------|-----------|--------------|
| egiga1 | SGMII | 0x00 |
, egiga1
Autoboot in 5 seconds...
qsgmii_sel - Select SFP or QSGMII modes on bc2/bobk.


Usage:
qsgmii_sel apply 16 bit array to select SFP or QSGMII modes
Creating 1 MTD partitions on "nand0":
0x000000000000-0x000040000000 : "mtd=0"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size: 524288 bytes (512 KiB)
UBI: logical eraseblock size: 516096 bytes
UBI: smallest flash I/O unit: 4096
UBI: VID header offset: 4096 (aligned 4096)
UBI: data offset: 8192
UBI: attached mtd1 to ubi0
UBI: MTD device name: "mtd=0"
UBI: MTD device size: 1024 MiB
UBI: number of good PEBs: 2040
UBI: number of bad PEBs: 8
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 2040
UBI: number of PEBs reserved for bad PEB handling: 20
UBI: max/mean erase counter: 4/2
do_rolImage_cmd: start
SF: Detected MX25L25735E with page size 64 KiB, total 32 MiB
Initializing ROL image ...
do UBI mount rootfs
UBIFS: recovery needed
UBIFS: recovery deferred
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: mounted read-only
UBIFS: file system size: 1034772480 bytes (1010520 KiB, 986 MiB, 2005 LEBs)
UBIFS: journal size: 33546240 bytes (32760 KiB, 31 MiB, 65 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: LZO
UBIFS: reserved for root: 5182151 bytes (5060 KiB)
Doing rolCopyMFG
mfg_flag not found!
Failed loading mfg flag
Find active image and copy to RAM
Loading system/images/active-image ...
Loading file 'system/images/active-image' to addr 0x1c000000 with size 39907785 (0x0260f1c9)...
Done
Current Uboot version: 5.5.1 [0x50501]
Image header: image_version 6.4.1.2
image_time 2022-09-12_18:11:30
header_size 500
header_version 7
header_crc 0xc4ae0bde
image_size 39907785
image_magic FR00
image_crc 0x1e1a2805
minimum_uboot_version 6.4.1.2 [0x6040102]
num_of_files 7
file: uboot size: 933244 offset: 500 crc: a2851b2f
file: uimage size: 38730672 offset: 933744 crc: 9f98a9f1
file: projectinfo size: 348 offset: 39664416 crc: 1c29b93c
file: dtb size: 13140 offset: 39664764 crc: cd985f7c
DTB file matches (for CPU type 1)
file: ext_files size: 141 offset: 39677904 crc: 3c2f22e3
file: booton size: 229228 offset: 39678045 crc: 8728f7b1
file: imagesig size: 512 offset: 39907273 crc: 89d74f38

NAND read: device 0 offset 0x400000, size 0x200000
2097152 bytes read: OK
mvRolCheckUbootCrc: version size 16799042 crc 0x0
mvRolCheckUbootCrc: check uboot file at address 0x400000 status -1
mvRolEraseUboot: erase FLASH 0x400000 size 0x200000

NAND erase: device 0 offset 0x400000, size 0x200000
Erasing at 0x580000 -- 100% complete.
OK
mvRolWriteUboot: copy from RAM 0x1c0001f4 to FLASH 0x400000 size 933244

NAND write: device 0 offset 0x400000, size 0xe3d7c
933244 bytes written: OK

NAND read: device 0 offset 0x400000, size 0x200000
2097152 bytes read: OK
mvRolCheckUbootCrc: version 6.4.1.2 size 933244 crc 0xd3f9e008
mvRolCheckUbootCrc: crc is correct
mvRolCheckUbootCrc: check uboot file at address 0x400000 status 0
mvRolEraseUboot: erase FLASH 0x600000 size 0x200000

NAND erase: device 0 offset 0x600000, size 0x200000
Erasing at 0x780000 -- 100% complete.
OK
mvRolWriteUboot: copy from RAM 0x1c0001f4 to FLASH 0x600000 size 933244

NAND write: device 0 offset 0x600000, size 0xe3d7c
933244 bytes written: OK

NAND read: device 0 offset 0x600000, size 0x200000
2097152 bytes read: OK
mvRolCheckUbootCrc: version 6.4.1.2 size 933244 crc 0xd3f9e008
mvRolCheckUbootCrc: crc is correct
mvRolCheckUbootCrc: check uboot file at address 0x600000 status 0
resetting ...

BootROM 1.43
Booting from SPI flash

[Евгений Т]

Добрый день.

Ответ дадим в самое ближайшее время в рамках заведённой вами заявки в системе ServiceDesk.