О деактивации форума Eltex

Уважаемые коллеги! В связи с потерей актуальности данного ресурса, нами было принято решение о частичной деактивации форума Eltex. Мы отключили функции регистрации и создания новых тем, а также возможность оставлять сообщения. Форум продолжит работу в "режиме чтения", так как за долгие годы работы здесь накопилось много полезной информации и ответов на часто встречающиеся вопросы.

Мы активно развиваем другие каналы коммуникаций, которые позволяют более оперативно и адресно консультировать наших клиентов. Если у вас возникли вопросы по работе оборудования, вы можете обратиться в техническую поддержку Eltex, воспользовавшись формой обращения на сайте компании или оставить заявку в системе Service Desk. По иным вопросам проконсультируют наши менеджеры коммерческого отдела: eltex@eltex-co.ru.

Проблема с MES2408, после обновления ПО

MES, ESR
Daymok
Сообщения: 1
Зарегистрирован: 29 окт 2019 17:34
Reputation: 0

Проблема с MES2408, после обновления ПО

Сообщение Daymok » 29 окт 2019 17:58

Приветствую.

Код: Выделить всё

 
console# sh system information

Hardware Version                  : 01.04.01
Software Version                  : 10.1.6.2
Firmware Version                  : 10.1.6.2

Hardware Serial Number            : ES82000496
Software Serial Number            : bb5f83e9
System Contact                    : eltex@eltex-co.ru
System Name                       :
System Location                   : Eltex Ltd, Russia
System Description                : MES2408 AC 10-port 1G Managed Switch
Logging Option                    : Console Logging
Device Uptime                     : 0 Days, 0 Hrs, 32 Mins, 56 Secs
Login Authentication Mode         : Local
Config Save Status                : Not Initiated
Remote Save Status                : Not Initiated
Config Restore Status             : Not Initiated
Traffic Separation Control        : none

После обновления ПО с версии 10.1.6.2 на 10.1.8.2 коммутатор уходит в цикличную перезагрузку. Обновление производилось по tftp. Проблем в ходе обновления не возникало.

Код: Выделить всё

console# copy tftp://192.168.1.254/mes2400-1018-2R0.iss image
Erasing image sector and starting copy operation...
Copied tftp://192.168.1.254/mes2400-1018-2R0.iss ==> image

Далее после перезагрузки происходит это

Код: Выделить всё

console# reload
<130> 1-Jan-1970 00:13:34 MSR-2-System is rebooting...!!!
The system is going down NOW !!
The system is going down NOW !!
Sending SIGTERM to all processes.
Sending SIGTERM to all processes.
Sending SIGKILL to all processes.
Sending SIGKILL to all processes.
Please stand by while rebooting the system.
Please stand by while rebooting the system.
Restarting system.
System restart.
System restart.


U-Boot 2011.12.(2.1.5.67086) (Aug 28 2019 - 18:13:42)

Board: RTL838x CPU:500MHz LXB:200MHz MEM:300MHz
DRAM:  256 MB
SPI-F: 1x32 MB
Loading 65536B env. variables from offset 0x110000
*** Warning - bad CRC, using default environment

chip_index=      25
Switch Model: mes2408_board (Port Count: 10)
Switch Chip: RTL8380
**************************************************
#### RTL8218B config - MAC ID = 8 ####
Now Internal PHY
PHY[1]: not supported in EEE
Net:   Net Initialization Skipped
rtl8380#0
Autoboot in 3 seconds

Loading image:   RUNTIME1
Header version:  1
Image version:   10.1.8.2
Commit hash:     a392258d
## Booting kernel from Legacy Image at b4140084 ...
   Image Name:   3.0.0
   Created:      2019-08-28  18:14:09 UTC
   Image Type:   MIPS Linux Kernel Image (gzip compressed)
   Data Size:    8965789 Bytes = 8.6 MB
   Load Address: 80000000
   Entry Point:  80003710
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel ...

Linux version 2.6.32.58 (gcc version 4.3.6 20110218 (prerelease) (Realtek MSDK-4.3.6 Build 1464) ) #2 Wed Aug 28 18:13:41 +07 2019
CPU revision is: 00019070 (MIPS 4KEc)
Determined physical RAM map:
 memory: 0fd00000 @ 00000000 (usable)
User-defined physical RAM map:
 memory: 0fd00000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal   0x00000000 -> 0x0000fd00
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x0000fd00
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64262
Kernel command line: console=ttyS0,115200 mem=253M
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Primary instruction cache 16kB, VIPT, 4-way, linesize 16 bytes.
Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 246468k/259072k available (1561k kernel code, 12236k reserved, 360k data, 7996k init, 0k highmem)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:128
console [ttyS0] enabled
Calibrating delay loop... 498.07 BogoMIPS (lpj=2490368)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 39) is a 16550A
Probe: SPI CS1 Flash Type MX25L25635F
Creating 9 MTD partitions on "Total SPI FLASH":
0x000000000000-0x000000080000 : "LOADER1"
0x000000080000-0x000000100000 : "LOADER2"
0x000000100000-0x000000110000 : "BOOTON"
0x000000110000-0x000000120000 : "BDINFO"
0x000000120000-0x000000130000 : "SYSINFO"
0x000000130000-0x000000140000 : "FACTORY"
0x000000140000-0x000000b40000 : "RUNTIME1"
0x000000b40000-0x000001540000 : "RUNTIME2"
0x000001540000-0x000002000000 : "JFFS2 CFG"
PPP generic driver version 2.4.2
TCP cubic registered
NET: Registered protocol family 17
registered taskstats version 1
Freeing unused kernel memory: 7996k freed
init started:  BusyBox v1.00 (2019.08.26-10:01+0000) multi-call binary
Starting pid 15, console : '/etc/rc'
Init RTCORE Driver Module....OK
 Unable to open sizing file system.size
 System Size Data Structure updated with Default Values
LR:
      This switch software is implemented using Open sources from OpenSSL,OpenSSH,and other open source community.
To see a full description, type "show system acknowledgement"

                 Eltex Switch


To perform reset to factory defaults do not release the button for 10 seconds.
ZTP: Awaiting DHCP Option Info from DHCP Server
<134> 1-Jan-1970 00:00:25 FM-6-Initiating system reboot and resetting to default configuration via F-button

<130> 1-Jan-1970 00:00:25 MSR-2-System is rebooting...!!!
The system is going down NOW !!
The system is going down NOW !!
Sending SIGTERM to all processes.
Sending SIGTERM to all processes.
Sending SIGKILL to all processes.
Sending SIGKILL to all processes.
Please stand by while rebooting the system.
Please stand by while rebooting the system.
Restarting system.
System restart.
System restart.


U-Boot 2011.12.(2.1.5.67086) (Aug 28 2019 - 18:13:42)

Board: RTL838x CPU:500MHz LXB:200MHz MEM:300MHz
DRAM:  256 MB
SPI-F: 1x32 MB
Loading 65536B env. variables from offset 0x110000
*** Warning - bad CRC, using default environment

chip_index=      25
Switch Model: mes2408_board (Port Count: 10)
Switch Chip: RTL8380
**************************************************
#### RTL8218B config - MAC ID = 8 ####
Now Internal PHY
PHY[1]: not supported in EEE
Net:   Net Initialization Skipped
rtl8380#0
Autoboot in 3 seconds

Loading image:   RUNTIME1
Header version:  1
Image version:   10.1.8.2
Commit hash:     a392258d
## Booting kernel from Legacy Image at b4140084 ...
   Image Name:   3.0.0
   Created:      2019-08-28  18:14:09 UTC
   Image Type:   MIPS Linux Kernel Image (gzip compressed)
   Data Size:    8965789 Bytes = 8.6 MB
   Load Address: 80000000
   Entry Point:  80003710
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel ...

Linux version 2.6.32.58 (gcc version 4.3.6 20110218 (prerelease) (Realtek MSDK-4.3.6 Build 1464) ) #2 Wed Aug 28 18:13:41 +07 2019
CPU revision is: 00019070 (MIPS 4KEc)
Determined physical RAM map:
 memory: 0fd00000 @ 00000000 (usable)
User-defined physical RAM map:
 memory: 0fd00000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal   0x00000000 -> 0x0000fd00
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x0000fd00
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64262
Kernel command line: console=ttyS0,115200 mem=253M
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Primary instruction cache 16kB, VIPT, 4-way, linesize 16 bytes.
Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 246468k/259072k available (1561k kernel code, 12236k reserved, 360k data, 7996k init, 0k highmem)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:128
console [ttyS0] enabled
Calibrating delay loop... 498.07 BogoMIPS (lpj=2490368)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 39) is a 16550A
Probe: SPI CS1 Flash Type MX25L25635F
Creating 9 MTD partitions on "Total SPI FLASH":
0x000000000000-0x000000080000 : "LOADER1"
0x000000080000-0x000000100000 : "LOADER2"
0x000000100000-0x000000110000 : "BOOTON"
0x000000110000-0x000000120000 : "BDINFO"
0x000000120000-0x000000130000 : "SYSINFO"
0x000000130000-0x000000140000 : "FACTORY"
0x000000140000-0x000000b40000 : "RUNTIME1"
0x000000b40000-0x000001540000 : "RUNTIME2"
0x000001540000-0x000002000000 : "JFFS2 CFG"
PPP generic driver version 2.4.2
TCP cubic registered
NET: Registered protocol family 17
registered taskstats version 1
Freeing unused kernel memory: 7996k freed
init started:  BusyBox v1.00 (2019.08.26-10:01+0000) multi-call binary
Starting pid 15, console : '/etc/rc'
Init RTCORE Driver Module....OK
 Unable to open sizing file system.size
 System Size Data Structure updated with Default Values
LR:
      This switch software is implemented using Open sources from OpenSSL,OpenSSH,and other open source community.
To see a full description, type "show system acknowledgement"

                 Eltex Switch


To perform reset to factory defaults do not release the button for 10 seconds.
ZTP: Awaiting DHCP Option Info from DHCP Server
<134> 1-Jan-1970 00:00:25 FM-6-Initiating system reboot and resetting to default configuration via F-button

<130> 1-Jan-1970 00:00:25 MSR-2-System is rebooting...!!!
The system is going down NOW !!
The system is going down NOW !!
Sending SIGTERM to all processes.
Sending SIGTERM to all processes.
Sending SIGKILL to all processes.
Sending SIGKILL to all processes.
Please stand by while rebooting the system.
Please stand by while rebooting the system.
Restarting system.
System restart.
System restart.

В чем может быть проблема?

Андрей Есман
Сообщения: 175
Зарегистрирован: 22 фев 2019 12:02
Reputation: 1
Откуда: Элтекс

Re: Проблема с MES2408, после обновления ПО

Сообщение Андрей Есман » 05 ноя 2019 09:49

Здравствуйте.

Ответили Вам по почте.
Андрей Есман / Элтекс / Сервисный центр ШПД / https://eltex-co.ru/support/


Вернуться в «Коммутаторы и маршрутизаторы Ethernet»

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и 12 гостей