Страница 1 из 1

MES2428 Сбой при обновлении ПО

Добавлено: 21 июл 2020 20:56
wsndemon
Вовремя обновления ПО Mes2428 до версии 10.2.1.1 на двух устройствах примерно на середине применения вышла ошибка после чего отключились эзернет порты
загрузка удачно прошитого устройства

Код: Выделить всё

Unable to open sizing file system.size
 System Size Data Structure updated with Default Values
LR:
      This switch software is implemented using Open sources from OpenSSL,OpenSSH,and other open source community.
To see a full description, type "show system acknowledgement"
RTCORE Driver Module Initialize
  IOAL init
  Log init
  Hardware-profile probe (MES2428)
  Hardware-profile init
  GPIO probe (unit 0): (found)
  GPIO Init
  SPI init (unit 0)
  TC probe (unit 0): (found)
  TC init (unit 0)
    TC util init (unit 0)
  Watchdog probe (unit 0): (found)
  Watchdog init (unit 0)
  I2C probe (unit 0)
  I2C init (unit 0)
  RTL8231 probe (unit 0): (found)
  RTL8231 init (unit 0)
  UART probe (unit 0): (found)
  Intr init (unit 0)
RTK Driver Module Initialize
  MAC probe (unit 0)
    Chip 8382 (found)
  MAC init (unit 0)
  PHY probe (unit 0)
  Chip Construct (unit 0)
    Chip Construct
    Disable PHY Polling
    PHY Reset
    MAC Construct
    Serdes Construct
    PHY Construct
sched: RT throttling activated
    Enable PHY Polling
    PHY Power Off
  PHY init (unit 0)
  Mgmt_dev init (unit 0)

                 Eltex Switch

  NIC probe (unit 0)
<133> 1-Jan-1970 00:00:34.580 MSR-5-ZTP Initializing...!
<133> 1-Jan-1970 00:00:34.580 MSR-5-Registering with DHCP Client
<133> 1-Jan-1970 00:00:34.580 MSR-5-Awaiting DHCP Option Info from DHCP Server
<133> 1-Jan-1970 00:01:36.660 MSR-5-Unregistering with DHCP Client
<133> 1-Jan-1970 00:01:36.730 MSR-5-No Options Received!


Загрузка после провала прошивки

Код: Выделить всё

      This switch software is implemented using Open sources from OpenSSL,OpenSSH,and other open source community.
To see a full description, type "show system acknowledgement"
port 0 patch ready fail 0
port 1 patch ready fail 0
port 2 patch ready fail 0
port 3 patch ready fail 0
port 4 patch ready fail 0
port 5 patch ready fail 0
port 6 patch ready fail 0
port 7 patch ready fail 0
port 8 patch ready fail 0
port 9 patch ready fail 0
port 10 patch ready fail 0
port 11 patch ready fail 0
port 12 patch ready fail 0
port 13 patch ready fail 0
port 14 patch ready fail 0
port 15 patch ready fail 0
port 16 patch ready fail 0
port 17 patch ready fail 0
port 18 patch ready fail 0
port 19 patch ready fail 0
port 20 patch ready fail 0
port 21 patch ready fail 0
port 22 patch ready fail 0
port 23 patch ready fail 0

                 Eltex Switch

login:

Re: MES2428 Сбой при обновлении ПО

Добавлено: 29 июл 2020 14:57
Евгений Т
Здравствуйте.

Ответ был дан в Servicedesk.