О деактивации форума Eltex

Уважаемые коллеги! В связи с потерей актуальности данного ресурса, нами было принято решение о частичной деактивации форума Eltex. Мы отключили функции регистрации и создания новых тем, а также возможность оставлять сообщения. Форум продолжит работу в "режиме чтения", так как за долгие годы работы здесь накопилось много полезной информации и ответов на часто встречающиеся вопросы.

Мы активно развиваем другие каналы коммуникаций, которые позволяют более оперативно и адресно консультировать наших клиентов. Если у вас возникли вопросы по работе оборудования, вы можете обратиться в техническую поддержку Eltex, воспользовавшись формой обращения на сайте компании или оставить заявку в системе Service Desk. По иным вопросам проконсультируют наши менеджеры коммерческого отдела: eltex@eltex-co.ru.

128 абонентов на канал - помогите настроить

ONT NTE / NTP, OLT LTE / LTP / MA4000-PX
remalex
Сообщения: 23
Зарегистрирован: 29 авг 2013 01:18
Reputation: 0

128 абонентов на канал - помогите настроить

Сообщение remalex » 16 янв 2015 14:40

Голова LTE-2X
На днях кол-во абонентов на голове превысило 128 и начались проблемы, отваливался приставок и тд
Прочитал что нужно перенастроить голов на работу 128 абонентов на порт.
Начал все делать по мануалу который приводится на сайте, но ничего не получается
Голову сбросил к настройкам по умолчанию
Воожу команду
LTE-2X# profile rules 1
ERROR: No such profile
LTE-2X#

Что делать если профиля нет?

Dirks G
Сообщения: 524
Зарегистрирован: 28 июл 2014 10:47
Reputation: 0
Откуда: Элтекс

Re: 128 абонентов на канал - помогите настроить

Сообщение Dirks G » 16 янв 2015 14:49

Добрый день.
Необходимо создать профиль:
LTE-8X# add profile

ipmc Add IP multicast profile
path Add paths profile
ports Add ports profile
rules Add rules profile
shaper Add shaper profile
Геннадий Диркс / Элтекс / Сервисный центр ШПД

remalex
Сообщения: 23
Зарегистрирован: 29 авг 2013 01:18
Reputation: 0

Re: 128 абонентов на канал - помогите настроить

Сообщение remalex » 16 янв 2015 15:10

С профилем вроде разобрался
Вот что получилось

LTE-2X(profile-rules)# rule show pon
0) 14: if (LinkIndex == 0x0) then path = port 0 queue 0; forward
1) 14: if (LinkIndex == 0x2) then path = port 1 queue 0; forward

Смущает что во второй строчке 0х2 а в мануале 0х1

на что это влияет? ничего страшного если оставить так?

remalex
Сообщения: 23
Зарегистрирован: 29 авг 2013 01:18
Reputation: 0

Re: 128 абонентов на канал - помогите настроить

Сообщение remalex » 16 янв 2015 15:43

Вроде все сделал как написано в мануале, ничего не получается, нужна помощь

Dirks G
Сообщения: 524
Зарегистрирован: 28 июл 2014 10:47
Reputation: 0
Откуда: Элтекс

Re: 128 абонентов на канал - помогите настроить

Сообщение Dirks G » 16 янв 2015 16:36

remalex писал(а):Вроде все сделал как написано в мануале, ничего не получается, нужна помощь

Скажите вашу почту, можно в личку.
Геннадий Диркс / Элтекс / Сервисный центр ШПД

alexmasz
Сообщения: 56
Зарегистрирован: 05 мар 2015 20:39
Reputation: 0

Re: 128 абонентов на канал - помогите настроить

Сообщение alexmasz » 06 ноя 2015 03:43

Добрый день!

Правильно ли настроен терминал под 128 ONT на канал:

При регистрации ONT профили, кроме rules, используются default.
Профили rules назначаются отталкиваясь от канала
0 = профиль 100 = vlan100
1 = профиль 101 = vlan101
С абонентской стороны используется только UNI0.

ont x 1000

Код: Выделить всё

(ONT-x/1000/02:00:22:01:4F:88)# show config
Channel/ID: x/1000   MAC: 02:00:22:01:4F:88  Type: NTE-2         
(OLT: x Port: x)
Secret: 1234
Description:
ONU    block: no
UNI0   block: no
UNI1   block: no
RF out block: n/a
Rules profile:        101   
Shaper profile:       0      Default profile
IP multicast profile: 0      Default profile
Ports profile:        0      Default profile
Paths profile:        0      Default profile
Additional network parameters:
Alternative ethertype: 0x88A8
Use for upstream:  no  Use for downstream:  no


Код: Выделить всё

show profile rules list
     2      100               
     3      101   
 
show profile shaper list
     0        0                Default profile

show profile ports list
     0        0                Default profile

show profile path list
     0        0                Default profile

show profile ipmc list
     0        0                Default profile           


profile rules 101

Код: Выделить всё

(profile-rules)# rule show pon
 0) 0: if (VID == 101) then DeleteTag; forward
 1) 1: if (VID != 101) then discard
 2) 14: if (LinkIndex == 0x0) then path = port 0 queue 0; forward
 3) 14: if (LinkIndex == 0x3) then path = port 1 queue 1; forward

(profile-rules)# rule show uni0
 0) 0: if (Always) then AddTagVID = 101; forward
 1) 14: if (Always) then path = link 0 queue 0; forward

(profile-rules)# rule show uni1



profile ports 0

Код: Выделить всё

(profile-ports0)# show information
Index:   0
Description: Default profile
Links count: 2

PON port:
Auto downstream broadcast frame forwarding: yes

UNI0 port:
Enabled: yes
Autonegotiation: yes
Speed: 1Gbps
Duplex: full
Automatic learning entry limit: 64
Learned entry age limit: 60

UNI1 port:
Enabled: yes
Autonegotiation: yes
Speed: 100Mbps
Duplex: full
Automatic learning entry limit: 64
Learned entry age limit: 60


profile path 0

Код: Выделить всё

(profile-path0)# show information
Index:   0
Description: Default profile
Link0 assigned to PATH ID = 0
Link1 assigned to PATH ID = 1
Link2 assigned to PATH ID = unassigned
Link3 assigned to PATH ID = unassigned

(profile-path0)# rule show path0
 0) 10: if (Always) then (ClearDiscard) and (SetQueue 0) and (SetUnicastLink 0)
(profile-path0)# rule show path1
 0) 10: if (Always) then (ClearDiscard) and (SetQueue 0) and (SetUnicastLink 1)


В какой-то момент один канал начал сыпаться. Обнаружил что на 0 канале уже 65 абонентов,
а на 1 канале 70, который вобщем-то и посыпался. Выполнив данную настройку по Базе Знаний -
сделал OLT0# reconfig и reboot. Пока что не ясно, работает или нет.

Что я мог упустить? В принципе мне вообше не понятны действия для "расширения" каналов (:
1) что это в ports - Automatic learning entry limit: 64
2) надо изменить rules(?)
14: if (LinkIndex == 0x0) then path = port 0 queue 0; forward
14: if (LinkIndex == 0x3) then path = port 1 queue 1; forward
на
14: if (LinkIndex == 0x0) then path = port 0 queue 0; forward
14: if (LinkIndex == 0x1) then path = port 0 queue 1; forward
3) при reconfig и reboot - ONT загрузиться уже с изменениями?

alex-xxi
Сообщения: 88
Зарегистрирован: 12 май 2011 17:50
Reputation: 0

Re: 128 абонентов на канал - помогите настроить

Сообщение alex-xxi » 22 авг 2017 13:49

Настроили в соответствии с инструкцией http://kcs.eltex.nsk.ru/articles/682

Код: Выделить всё

PON-3# profile rules 1
PON-3(profile-rules)# rule show pon
 0) 0: if (VID == 202) then ReplaceTagVID = 2; forward
 1) 1: if (VID == 1150) then ReplaceTagVID = 3; forward
 2) 14: if (LinkIndex == 0x0) then path = port 0 queue 0; forward
 3) 14: if (LinkIndex == 0x1) then path = port 0 queue 1; forward

PON-3# profile rules 2
PON-3(profile-rules)# rule show pon
 0) 0: if (VID == 1150) then DeleteTag
 1) 14: if (LinkIndex == 0x0) then path = port 0 queue 0; forward
 2) 14: if (LinkIndex == 0x1) then path = port 0 queue 1; forward

PON-3(profile-rules)# rule show uni1
 0) 4: if (L3Proto == 0x2) then ClearAddTag
 1) 5: if (Always) then AddTagVID = 1150
 2) 14: if (Always) then path = link 1 queue 0; forward

PON-3# profile ports 0
PON-3(profile-ports0)# show information
Index:   0
Description: Default profile
Links count: 2

PON port:
Auto downstream broadcast frame forwarding: yes

UNI0 port:
Enabled: yes
Autonegotiation: yes
Speed: 1Gbps
Duplex: full
Automatic learning entry limit: 64
Learned entry age limit: 60

UNI1 port:
Enabled: yes
Autonegotiation: yes
Speed: 100Mbps
Duplex: full
Automatic learning entry limit: 64
Learned entry age limit: 60

PON-3# profile path 0
PON-3(profile-path0)# show information
Index:   0
Description: Default profile
Link0 assigned to PATH ID = 0
Link1 assigned to PATH ID = 1
Link2 assigned to PATH ID = unassigned
Link3 assigned to PATH ID = unassigned

PON-3(profile-path0)# rule show path0
 0) 10: if (Always) then (ClearDiscard) and (SetQueue 0) and (SetUnicastLink 0)
PON-3(profile-path0)# rule show path1
 0) 10: if (Always) then (ClearDiscard) and (SetQueue 0) and (SetUnicastLink 1)
PON-3(profile-path0)#

Но после реконфига всех ону и олт ни одна ону не может подключиться, заканчивается статусом CFGFAILED.
В логах сообщения такого характера:

Код: Выделить всё

Aug 21 15:57:35 PON-3 chip-proxy: profiler_link_discovery: 02:00:56:02:D2:33 link 2 set OAM rate failed
Aug 21 15:58:42 PON-3 chip-proxy: profiler_check_ont_queues: ONU 02:00:56:02:A7:D1 queues config is invalid.
Aug 21 15:58:43 PON-3 chip-proxy: profiler_link_discovery: 02:00:60:02:40:DB link 3 set OAM rate failed
Aug 21 15:59:11 PON-3 chip-proxy: profiler_check_ont_queues: ONU 02:00:5E:02:D9:5C queues config is invalid.

alex-xxi
Сообщения: 88
Зарегистрирован: 12 май 2011 17:50
Reputation: 0

Re: 128 абонентов на канал - помогите настроить

Сообщение alex-xxi » 23 авг 2017 14:12

Для NTE-2 прописали такие правила:

Код: Выделить всё

PON-3# profile rules 2
PON-3(profile-rules)# rule show pon
 0) 0: if (VID == 1150) then DeleteTag
 1) 14: if (LinkIndex == 0x0) then path = port 0 queue 0; forward
 2) 14: if (LinkIndex == 0x1) then path = port 1 queue 0; forward
 
PON-3(profile-rules)# rule show uni0
 0) 4: if (L3Proto == 0x2) then ClearAddTag
 1) 5: if (Always) then AddTagVID = 1150
 2) 14: if (Always) then path = link 0 queue 0; forward

PON-3(profile-rules)# rule show uni1
 0) 4: if (L3Proto == 0x2) then ClearAddTag
 1) 5: if (Always) then AddTagVID = 1150
 2) 14: if (Always) then path = link 1 queue 0; forward

Для NTE-RG-1402:

Код: Выделить всё

PON-3# profile rules 1
PON-3(profile-rules)# rule show pon
 0) 0: if (VID == 202) then ReplaceTagVID = 2; forward
 1) 1: if (VID == 1150) then ReplaceTagVID = 3; forward
 2) 14: if (LinkIndex == 0x0) then path = port 0 queue 0; forward
 3) 14: if (LinkIndex == 0x1) then path = port 0 queue 1; forward
 
PON-3(profile-rules)# rule show uni0
0) 0: if (VID == 2) then ReplaceTagVID = 202
1) 1: if (VID == 3) then ReplaceTagVID = 1150; forward
2) 14: if (Always) then path = link 0 queue 0; forward

Подскажите это корректные настройки?
Какая версия ПО должна быть на абонентских терминалах? Заметили, что на старых версиях NTE-RG-1402 не подключается.
Некоторые NTE-2 тоже не хотят подключаться, перезагрузка абонентских терминалов не помогает, в логах пишет:

Код: Выделить всё

Jan  1 11:43:23 LTE-8X chip-proxy: alarm_oltlink: 02:00:22:03:29:60 (desc: none) in REPORTTIMEOUT state
Jan  1 11:43:23 LTE-8X chip-proxy: alarm_oltlink: 02:00:22:03:29:61 (desc: none) in REPORTTIMEOUT state
Jan  1 11:43:35 LTE-8X chip-proxy: ONT 02:00:22:03:29:60 is allocated by link 02:00:22:03:29:60
Jan  1 11:43:37 LTE-8X chip-proxy: profiler_onu_link_create_path_internal: link 02:00:22:03:29:60 create new path(8436) failed(response->header.rcode 4)
Jan  1 11:43:37 LTE-8X chip-proxy: profiler_link_reconfigure_internal: create ONT 02:00:22:03:29:60 (desc: none) link 0 failed
Jan  1 11:43:38 LTE-8X chip-proxy: profiler_onu_reconfigure: ONU 02:00:22:03:29:60 (desc: none) configure failed
Jan  1 11:45:26 LTE-8X chip-proxy: ONT-02:00:22:03:36:00 in state (CFGFAILED) force rediscovery by timeout started
Jan  1 11:45:26 LTE-8X chip-proxy: ONT-02:00:22:03:36:00 reconfiguration initialized
Jan  1 11:45:27 LTE-8X chip-proxy: ONT 02:00:22:03:36:00 (desc: none) disconnected (OLT3[1])
Jan  1 11:45:28 LTE-8X chip-proxy: alarm_oltlink: 02:00:22:03:36:00 (desc: none) in REPORTTIMEOUT state
Jan  1 11:45:28 LTE-8X chip-proxy: alarm_oltlink: 02:00:22:03:36:01 (desc: none) in REPORTTIMEOUT state
Jan  1 11:45:41 LTE-8X chip-proxy: ONT 02:00:22:03:36:00 is allocated by link 02:00:22:03:36:00
Jan  1 11:45:43 LTE-8X chip-proxy: profiler_onu_link_create_path_internal: link 02:00:22:03:36:00 create new path(8432) failed(response->header.rcode 4)
Jan  1 11:45:43 LTE-8X chip-proxy: profiler_link_reconfigure_internal: create ONT 02:00:22:03:36:00 (desc: none) link 0 failed
Jan  1 11:45:43 LTE-8X chip-proxy: profiler_onu_reconfigure: ONU 02:00:22:03:36:00 (desc: none) configure failed
Jan  1 11:45:48 LTE-8X chip-proxy: ONT-02:00:22:04:26:6C in state (CFGFAILED) force rediscovery by timeout started
Jan  1 11:45:48 LTE-8X chip-proxy: ONT-02:00:22:04:26:6C reconfiguration initialized
Jan  1 11:45:49 LTE-8X chip-proxy: ONT 02:00:22:04:26:6C (desc: none) disconnected (OLT3[1])
Jan  1 11:45:50 LTE-8X chip-proxy: alarm_oltlink: 02:00:22:04:26:6C (desc: none) in REPORTTIMEOUT state
Jan  1 11:45:50 LTE-8X chip-proxy: alarm_oltlink: 02:00:22:04:26:6D (desc: none) in REPORTTIMEOUT state
Jan  1 11:45:57 LTE-8X chip-proxy: ONT 02:00:22:04:26:6C is allocated by link 02:00:22:04:26:6C
Jan  1 11:45:59 LTE-8X chip-proxy: profiler_onu_link_create_path_internal: link 02:00:22:04:26:6C create new path(8352) failed(response->header.rcode 4)
Jan  1 11:45:59 LTE-8X chip-proxy: profiler_link_reconfigure_internal: create ONT 02:00:22:04:26:6C (desc: none) link 0 failed
Jan  1 11:46:00 LTE-8X chip-proxy: profiler_onu_reconfigure: ONU 02:00:22:04:26:6C (desc: none) configure failed
Jan  1 11:47:25 LTE-8X chip-proxy: ONT-02:00:5E:03:0E:F0 in state (CFGFAILED) force rediscovery by timeout started
Jan  1 11:47:25 LTE-8X chip-proxy: ONT-02:00:5E:03:0E:F0 reconfiguration initialized
Jan  1 11:47:26 LTE-8X chip-proxy: ONT 02:00:5E:03:0E:F0 (desc: none) disconnected (OLT3[0])
Jan  1 11:47:27 LTE-8X chip-proxy: alarm_oltlink: 02:00:5E:03:0E:F0 (desc: none) in REPORTTIMEOUT state
Jan  1 11:47:27 LTE-8X chip-proxy: alarm_oltlink: 02:00:5E:03:0E:F1 (desc: none) in REPORTTIMEOUT state


На проблемной ветке подключено больше 64 абонентских устройств, но авторизуются только 64.
Не надо ли менять настройки Automatic Learning Entry Limit? Сейчас этот лимит как раз установлен 64.

Код: Выделить всё

PON-3# profile ports 0
PON-3(profile-ports0)# show information
Index:   0
Description: Default profile
Links count: 2

PON port:
Auto downstream broadcast frame forwarding: yes

UNI0 port:
Enabled: yes
Autonegotiation: yes
Speed: 1Gbps
Duplex: full
Automatic learning entry limit: 64
Learned entry age limit: 60

UNI1 port:
Enabled: yes
Autonegotiation: yes
Speed: 100Mbps
Duplex: full
Automatic learning entry limit: 64
Learned entry age limit: 60

Dirks G
Сообщения: 524
Зарегистрирован: 28 июл 2014 10:47
Reputation: 0
Откуда: Элтекс

Re: 128 абонентов на канал - помогите настроить

Сообщение Dirks G » 23 авг 2017 17:37

Добрый день.
Какая версия ПО на LTE?
Покажите:
show ont list verbose all
Также рекомендуем создавать новые профили и назначать их не на все ONT сразу, а группами.
Геннадий Диркс / Элтекс / Сервисный центр ШПД

alex-xxi
Сообщения: 88
Зарегистрирован: 12 май 2011 17:50
Reputation: 0

Re: 128 абонентов на канал - помогите настроить

Сообщение alex-xxi » 23 авг 2017 18:44

Отправил всю информацию на почту techsupp@eltex.nsk.ru.
На OLT больше 400 абонентских терминалов, поэтому достаточно проблематично менять им настройки, создавая новые профили. Приходится править существующие. Возможно есть механизм массового изменения настроек?

Dirks G
Сообщения: 524
Зарегистрирован: 28 июл 2014 10:47
Reputation: 0
Откуда: Элтекс

Re: 128 абонентов на канал - помогите настроить

Сообщение Dirks G » 28 авг 2017 16:56

Проблему решили.
Нужно было сделать реконфигурацию чипа для перераспределения линков.
Геннадий Диркс / Элтекс / Сервисный центр ШПД

alex-xxi
Сообщения: 88
Зарегистрирован: 12 май 2011 17:50
Reputation: 0

Re: 128 абонентов на канал - помогите настроить

Сообщение alex-xxi » 28 сен 2017 14:56

Подскажите настройки для NTE-RG-1421G-Wac для 128 каналов. В документации есть настройка только для 64 каналов:

Код: Выделить всё

LTE-8X(profile-rules)# rule show pon
0) 14: if (LinkIndex == 0x0) then path = port 0 queue 1; forward
1) 14: if (LinkIndex == 0x1) then path = port 0 queue 2; forward
2) 14: if (LinkIndex == 0x2) then path = port 0 queue 3; forward
3) 14: if (LinkIndex == 0x3) then path = port 0 queue 3; forward
LTE-8X(profile-rules)# rule show uni0
0) 14: if (Always) then path = link 0 queue 0; forward


Немного непонятна ситуация с очередями. Очередь 3 повторяется дважды, а очереди 0 вообще нет.

Такие настройки правильные? Смущает, что используются 3 очереди.

Код: Выделить всё

LTE-8X(profile-rules)# rule show pon
0) 14: if (LinkIndex == 0x0) then path = port 0 queue 1; forward
1) 14: if (LinkIndex == 0x1) then path = port 0 queue 2; forward
LTE-8X(profile-rules)# rule show uni0
0) 14: if (Always) then path = link 0 queue 0; forward

alex-xxi
Сообщения: 88
Зарегистрирован: 12 май 2011 17:50
Reputation: 0

Re: 128 абонентов на канал - помогите настроить

Сообщение alex-xxi » 28 янв 2020 18:40

Подскажите эти настройки для NTE-2 для работы на 128 каналах верные?

Код: Выделить всё

PON-3# profile rules 2
PON-3(profile-rules)# rule show pon
 0) 0: if (VID == 1150) then DeleteTag
 1) 14: if (LinkIndex == 0x0) then path = port 0 queue 0; forward
 2) 14: if (LinkIndex == 0x1) then path = port 1 queue 0; forward
 
PON-3(profile-rules)# rule show uni0
 0) 4: if (L3Proto == 0x2) then ClearAddTag
 1) 5: if (Always) then AddTagVID = 1150
 2) 14: if (Always) then path = link 0 queue 0; forward

PON-3(profile-rules)# rule show uni1
 0) 4: if (L3Proto == 0x2) then ClearAddTag
 1) 5: if (Always) then AddTagVID = 1150
 2) 14: if (Always) then path = link 1 queue 0; forward


Сейчас наблюдаем проблему у всех терминалов NTE-2 с такими правилами. У терминалов, у которых задействованы оба медных порта, наблюдается "переток mac-адресов" с одного медного порта на другой, при этом физически в каждый порт подключено отдельное устройство, петли нет. В статус BLOCKED ни одно устройство на OLT не попадает.
Может ли петля на одном терминале NTE-2 влиять на другие терминалы на этом же OLT?

Dirks G
Сообщения: 524
Зарегистрирован: 28 июл 2014 10:47
Reputation: 0
Откуда: Элтекс

Re: 128 абонентов на канал - помогите настроить

Сообщение Dirks G » 29 янв 2020 09:15

Добрый день.
Заполните заявку на - https://eltex-co.ru/support/
Геннадий Диркс / Элтекс / Сервисный центр ШПД


Вернуться в «Оборудование PON»

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и 19 гостей