Элтекс

Dear all, sorry again for writing this in English.
Is it possible to set up the NTU-RG-1402G-W as modem only? I want to use another wifi router.

In simple words, the network would be the modem (NTU-RG-1402G-W) + wifi router.

Thank you.

Yes, at the OLT this terminal can be configured in only bridge mode.

Александр Д писал(а):Yes, at the OLT this terminal can be configured in only bridge mode.

Thanks, could you please explain how?

example:



LTP-8X(config)# profile cross-connect bridge
LTP-8X(config-cross-connect)("bridge")# outer vid 100
LTP-8X(config-cross-connect)("bridge")# bridge
LTP-8X(config-cross-connect)("bridge")# bridge group 10
LTP-8X(config-cross-connect)("bridge")# exit
LTP-8X(config)# profile ports bridge
LTP-8X(config-ports)("bridge")# port 0 bridge group 10
LTP-8X(config-ports)("bridge")# do commit