АОН сигнализация 2ВСК

АТС МС240 на базе ЦПв3 и ЦКП
awsswa
Сообщения: 30
Зарегистрирован: 11 окт 2013 19:46
Reputation: 0

АОН сигнализация 2ВСК

Сообщение awsswa » 29 мар 2017 18:48

Конвертим из 2ВСК
Сигнализация - Декадная (на Импульсном челноке они так и не осилили отдачу АОН - перешли на декадную)
Субмодуль - Ожидание запроса АОН
Транковые группы - галочек нету
Внешние линии - пробовал по всякому ...
Сейчас выглядит так:
5 значная нумерация - 77001
Входящий звонок
прилетаем первая цифра 7
Запроc АОН (тут корректно получаем номер)
прилетают остальные цифры 7001 ... и первая цифра 7 игнорируется
но и все заканчивается из за не соответствии длины номера

$ (00:28:47.740)[SM(03):101] CAS. In seize (Local)
(00:28:47.740)[SM(03):101] PortClearVar
(00:28:47.740)[SM(03):101] Incoming call activate: cos '00', plan '00', access code 0 (access mask 00000000), pwd label 00, clir=n
(00:28:47.740)[SM(03):101] Voice off, v-chan 15:51
(00:28:47.740)[SWITCH] Off 15,51
(00:28:47.740)[SM(03):101] Set Trunk: idx 04/id 05. Digit +'999991', need rm 0. Modify: -1. Analiz: -1 (out tg=-1)
(00:28:47.740)[SM(03):101] Signal set: 'DIAL_TONE'
(00:28:47.740)[SM(03):101] Voice off, v-chan 15:51
(00:28:47.740)[SWITCH] Off 15,51
(00:28:47.740)[SM(03):101] CAS. State InDial. CAS: in=1001, out=0101
(00:28:47.740)[SM(03):101] State: 'InDial' (presence 0)
(00:28:47.740)[SM(03):101] Dial Proc (plan 00, state InDial): x[9][9][9][9][9][1]
In-Dial: link to index, num len 6
(00:28:47.740)[SM(03):101] LinkIdx: type=PREFIX, idx=22. Access code 0
(00:28:47.740)[SM(03):101] Link Prefix 22: type 'TRUNK.GRP', idx=1
User access code=00, pwd label 00
TG access need CID=optional, 'Quered CID'=n, 'Have CID'=n
(00:28:47.740)[SM(03):101] CMD: 'WAIT AON' Parent=SM(03):101.
(00:28:47.740)[SM(03):101] CAS. In Dial Ready
(00:28:47.740)[SM(03):101] CAS. Set '1101'
(00:28:47.840)[SM(03):101] Voice off, v-chan 15:51
(00:28:47.840)[SWITCH] Off 15,51
(00:28:48.140)[SM(03):101] Voice signal 'Dial.Ready', v-chan 15:51
(00:28:48.140)[SWITCH] Link 13,00 -> 15,51
(00:28:48.240)[SM(03):101] CAS. Set 'Wait AON'
(00:28:48.240)[SM(03):101] State: 'CID Wait' (presence 0)
(00:28:48.340)[SM(03):101] AON start query - first times
(00:28:48.340)[SM(03):101] Resource 08 link (v-chan 15:51 - 13:08)
(00:28:48.340)[SWITCH] Link 15,51 <-> 13,08
(00:28:48.340)[SM(03):101] CAS. Set '1001'
(00:28:49.240)[SM(03):101] AON: end of recv (aon len 8)
(00:28:49.240)[SM(03):101] Free res 8
(00:28:49.240)[SM(03):101] CAS. State InDial. CAS: in=1001, out=1001
(00:28:49.240)[SM(03):101] State: 'InDial' (presence 0)
(00:28:49.240)[SM(03):101] CAS. In Dial Ready
(00:28:49.240)[SM(03):101] CAS. Set '1101'
(00:28:49.240)[SM(03):101] CAS. AON: 31.34.31.32.32.31.31.31.
(00:28:49.240)[SM(03):101] Set Calling number: 4122111. Type: <UNKNOWN>. Category: 0x31 (PfxAdd: 0. CallingSet: 1)
(00:28:49.240)[SM(03):101] Set SORM calling number: 4122111. Type: <0xffffffff>
(00:28:49.240)[SM(03):101] Set Calling. Calling number: 4122111
Port calling info: category '1' <4122111>
A-num: category '1' <4122111>
Sorm Calling number: 4122111 (len 7). Type: <0xffffffff>
(00:28:49.240)[SM(03):101] Dial Proc (plan 00, state InDial): [9][9][9][9][9][1]
In-Dial: link to index, num len 6
(00:28:49.240)[SM(03):101] LinkIdx: type=PREFIX, idx=22. Access code 0
(00:28:49.240)[SM(03):101] Link Prefix 22: type 'TRUNK.GRP', idx=1
User access code=00, pwd label 00
TG access need CID=optional, 'Quered CID'=y, 'Have CID'=y
Prefix(TG): Min/Max/T-out 05/05/10
Out type: 0. Called type: 1
Outgoing mode: toll=0, enblock=0
EndOfDial=0. Num len 6, proceed 6, pfx del=6
Prefix(TG, modify num): delete sym=9 (need del 5, dial buf len 5)
Prefix(TG, modify num): delete sym=9 (need del 4, dial buf len 4)
Prefix(TG, modify num): delete sym=9 (need del 3, dial buf len 3)
Prefix(TG, modify num): delete sym=9 (need del 2, dial buf len 2)
Prefix(TG, modify num): delete sym=9 (need del 1, dial buf len 1)
Prefix(TG, modify num): delete sym=1 (need del 0, dial buf len 0)
(00:28:49.240)[SM(03):101] Prefix(TG). Dial buf: none
(00:28:49.240)[SM(03):101] Link to TG: offset 0, idx=1
TG ident: 2
TG 01. Modify index: clg -1, cld -1
TG lines count: 2. Select order: FIRST
TG current pos 0, trunk lines count 2, cycles=1
(00:28:49.240)[SM(03):101] 'Trunk Group' PRI, line=SM:00, idx=00
(00:28:49.240)[Q931] Line SM:00. Create Call, entry 00. CallRef=0008 (FROM ORIG)
(00:28:49.240)[PRI(00):00] PortClearVar
--mode enblock
(00:28:49.240)[PRI(00):00] State: 'Ready' (presence 0)
(00:28:49.240)[PRI(00):00] Post link: set TG param (incoming SM(03):101) - TG idx 1/id 2. Digit min=5/max=5/t-out=10 (next digit=y)
(00:28:49.240)[SM(03):101] Go dial to ext.port PRI(00):00
(00:28:49.240)[SM(03):101] Signal set: 'NULL'
(00:28:49.240)[SM(03):101] State: 'InUse' (presence 0)
(00:28:49.240)[SM(03):101] CMD: 'INFO: SHOW INFO' Parent=PRI(00):00.
(00:28:49.240)[SM(03):101] CMD: 'GO USE (WITH OUTGOING DIAL)' Parent=PRI(00):00.
(00:28:49.240)[SM(03):101] Next Digit: len=0, send=0, del=0, insert len=0
(00:28:49.240)[SM(03):101] Next Digit: out modify cld=-1
(00:28:49.240)[SM(03):101] Next Digit enabled (len=0, send=0, del=0)
(00:28:49.240)[SM(03):101] CMD: 'QUERY NEXT DIGIT' Parent=PRI(00):00.
(00:28:49.240)[SM(03):101] Voice link one way from PRI(00):00
(00:28:49.240)[SM(03):101] Voice off, v-chan 15:51
(00:28:49.240)[SWITCH] Off 15,51
Link ready, but linking fail
(00:28:49.240)[SM(03):101] Prefix(TG). TG pos 0: linked
(00:28:52.840)[SM(03):101] Voice link up: PRI(00):00
(00:28:52.840)[SM(03):101] CAS. Rx Digit (decadic) 07
(00:28:52.840)[SM(03):101] Dial In (in=01, need rm=0): [7]
Digit in buf: 01. Sended: 00. EndOfDial: n (Dial len 1)
(00:28:52.840)[SM(03):101] Dial Proc (plan 00, state InUse): x[7] <Next Digit enabled>
(00:28:52.840)[SM(03):101] Dial Proc: next, out_modify_cld=-1, in buf: len 1, send 0
(00:28:52.840)[SM(03):101] Dial Proc: len 1, send 0
(00:28:52.840)[SM(03):101] DialOut: digit 0x07 (out_modify_cld=-1, omCldFlag 0)
(00:28:52.840)[PRI(00):00] CMD: 'DIAL DIGIT' Parent=SM(03):101. Param=0x00000007
(00:28:52.840)[PRI(00):00] Enblock dial: len=1 (min=5, max=5, timeout=10)
query next digit
(00:28:52.840)[SM(03):101] Next Digit: len=1, send=1, del=0, insert len=0
(00:28:52.840)[SM(03):101] Next Digit: out modify cld=-1
(00:28:52.840)[SM(03):101] Next Digit enabled (len=1, send=1, del=0)
(00:28:52.840)[SM(03):101] CMD: 'QUERY NEXT DIGIT' Parent=PRI(00):00.
(00:28:52.840)[SM(03):101] Voice link one way from PRI(00):00
(00:28:52.840)[SM(03):101] Voice off, v-chan 15:51
(00:28:52.840)[SWITCH] Off 15,51
(00:28:54.540)[SM(03):101] Voice link up: PRI(00):00
(00:28:54.540)[SM(03):101] CAS. Rx Digit (decadic) 0A
(00:28:54.540)[SM(03):101] Dial In (in=01, need rm=0): [0]
Digit in buf: 02. Sended: 01. EndOfDial: n (Dial len 2)
(00:28:54.540)[SM(03):101] Dial Proc (plan 00, state InUse): [7]x[0] <Next Digit enabled>
(00:28:54.540)[SM(03):101] Dial Proc: next, out_modify_cld=-1, in buf: len 2, send 1
(00:28:54.540)[SM(03):101] Dial Proc: len 2, send 1
(00:28:54.540)[SM(03):101] DialOut: digit 0x0a (out_modify_cld=-1, omCldFlag 0)
(00:28:54.540)[PRI(00):00] CMD: 'DIAL DIGIT' Parent=SM(03):101. Param=0x0000000a
(00:28:54.540)[PRI(00):00] Enblock dial: len=2 (min=5, max=5, timeout=10)
query next digit
(00:28:54.540)[SM(03):101] Next Digit: len=2, send=2, del=0, insert len=0
(00:28:54.540)[SM(03):101] Next Digit: out modify cld=-1
(00:28:54.540)[SM(03):101] Next Digit enabled (len=2, send=2, del=0)
(00:28:54.540)[SM(03):101] CMD: 'QUERY NEXT DIGIT' Parent=PRI(00):00.
(00:28:54.540)[SM(03):101] Voice link one way from PRI(00):00
(00:28:54.540)[SM(03):101] Voice off, v-chan 15:51
(00:28:54.540)[SWITCH] Off 15,51
(00:28:56.140)[SM(03):101] Voice link up: PRI(00):00
(00:28:56.140)[SM(03):101] CAS. Rx Digit (decadic) 0A
(00:28:56.140)[SM(03):101] Dial In (in=01, need rm=0): [0]
Digit in buf: 03. Sended: 02. EndOfDial: n (Dial len 3)
(00:28:56.140)[SM(03):101] Dial Proc (plan 00, state InUse): [7][0]x[0] <Next Digit enabled>
(00:28:56.140)[SM(03):101] Dial Proc: next, out_modify_cld=-1, in buf: len 3, send 2
(00:28:56.140)[SM(03):101] Dial Proc: len 3, send 2
(00:28:56.140)[SM(03):101] DialOut: digit 0x0a (out_modify_cld=-1, omCldFlag 0)
(00:28:56.140)[PRI(00):00] CMD: 'DIAL DIGIT' Parent=SM(03):101. Param=0x0000000a
(00:28:56.140)[PRI(00):00] Enblock dial: len=3 (min=5, max=5, timeout=10)
query next digit
(00:28:56.140)[SM(03):101] Next Digit: len=3, send=3, del=0, insert len=0
(00:28:56.140)[SM(03):101] Next Digit: out modify cld=-1
(00:28:56.140)[SM(03):101] Next Digit enabled (len=3, send=3, del=0)
(00:28:56.140)[SM(03):101] CMD: 'QUERY NEXT DIGIT' Parent=PRI(00):00.
(00:28:56.140)[SM(03):101] Voice link one way from PRI(00):00
(00:28:56.140)[SM(03):101] Voice off, v-chan 15:51
(00:28:56.140)[SWITCH] Off 15,51
(00:28:56.840)[SM(03):101] Voice link up: PRI(00):00
(00:28:56.840)[SM(03):101] CAS. Rx Digit (decadic) 01
(00:28:56.840)[SM(03):101] Dial In (in=01, need rm=0): [1]
Digit in buf: 04. Sended: 03. EndOfDial: n (Dial len 4)
(00:28:56.840)[SM(03):101] Dial Proc (plan 00, state InUse): [7][0][0]x[1] <Next Digit enabled>
(00:28:56.840)[SM(03):101] Dial Proc: next, out_modify_cld=-1, in buf: len 4, send 3
(00:28:56.840)[SM(03):101] Dial Proc: len 4, send 3
(00:28:56.840)[SM(03):101] DialOut: digit 0x01 (out_modify_cld=-1, omCldFlag 0)
(00:28:56.840)[PRI(00):00] CMD: 'DIAL DIGIT' Parent=SM(03):101. Param=0x00000001
(00:28:56.840)[PRI(00):00] Enblock dial: len=4 (min=5, max=5, timeout=10)
query next digit
(00:28:56.840)[SM(03):101] Next Digit: len=4, send=4, del=0, insert len=0
(00:28:56.840)[SM(03):101] Next Digit: out modify cld=-1
(00:28:56.840)[SM(03):101] Next Digit enabled (len=4, send=4, del=0)
(00:28:56.840)[SM(03):101] CMD: 'QUERY NEXT DIGIT' Parent=PRI(00):00.
(00:28:56.840)[SM(03):101] Voice link one way from PRI(00):00
(00:28:56.840)[SM(03):101] Voice off, v-chan 15:51
(00:28:56.840)[SWITCH] Off 15,51
(00:29:06.140)[PRI(00):00] Outgoing Dial. Dial timer expired (10 sec)/low digit (len=4 < min=5), release
(00:29:06.140)[Q931] Line SM:00. CallRef=0008. Clear call entry. B-Chan=-1
(00:29:06.140)[PRI(00):00] Release call with cause 'Invalid number format(incomplete number)', loc 2. Link SM(03):101

bravo
Сообщения: 785
Зарегистрирован: 19 июн 2015 18:38
Reputation: 6

Re: АОН сигнализация 2ВСК

Сообщение bravo » 29 мар 2017 20:13

позвольте тыкнуть пальцем в небо - может быть "использовать номер префикса" ? а то очевидно у вас накопление номера идёт только со второй цифры.. если я всё правильно понял.
Тех. саппорт от коллег: https://t.me/eltex_experts

awsswa
Сообщения: 30
Зарегистрирован: 11 окт 2013 19:46
Reputation: 0

Re: АОН сигнализация 2ВСК

Сообщение awsswa » 30 мар 2017 11:01

Только стоит выключить АОН и сразу работают все пять цифр


Вернуться в «АТС: городские, узловые, сельские»

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и 1 гость