О деактивации форума Eltex
Уважаемые коллеги! В связи с потерей актуальности данного ресурса, нами было принято решение о частичной деактивации форума Eltex. Мы отключили функции регистрации и создания новых тем, а также возможность оставлять сообщения. Форум продолжит работу в "режиме чтения", так как за долгие годы работы здесь накопилось много полезной информации и ответов на часто встречающиеся вопросы.
Мы активно развиваем другие каналы коммуникаций, которые позволяют более оперативно и адресно консультировать наших клиентов. Если у вас возникли вопросы по работе оборудования, вы можете обратиться в техническую поддержку Eltex, воспользовавшись формой обращения на сайте компании или оставить заявку в системе Service Desk. По иным вопросам проконсультируют наши менеджеры коммерческого отдела: eltex@eltex-co.ru.
Уважаемые коллеги! В связи с потерей актуальности данного ресурса, нами было принято решение о частичной деактивации форума Eltex. Мы отключили функции регистрации и создания новых тем, а также возможность оставлять сообщения. Форум продолжит работу в "режиме чтения", так как за долгие годы работы здесь накопилось много полезной информации и ответов на часто встречающиеся вопросы.
Мы активно развиваем другие каналы коммуникаций, которые позволяют более оперативно и адресно консультировать наших клиентов. Если у вас возникли вопросы по работе оборудования, вы можете обратиться в техническую поддержку Eltex, воспользовавшись формой обращения на сайте компании или оставить заявку в системе Service Desk. По иным вопросам проконсультируют наши менеджеры коммерческого отдела: eltex@eltex-co.ru.
TAU-1.IP, H323 и FXO проброс
TAU-1.IP, H323 и FXO проброс
Добрый день, имеется схема FXO(AP200) -> vlan -> FXS (TAU-1.IP, H323). Звонки исходящие (FXS->FXO) ходят без проблем, а вот входящие (FXO->FXS) не проходят. В логах на Addpac ошибка Local:AbortedDestination. Что она значит, так и не нашел. Может кто сталкивался с таким? Причем в схеме FXO(AP200) -> vlan -> FXS (AP100, H323) все прекрасно работает.
Логи
Вот лог с AP200
------------------------
AP200# 21 <CEP 000000> : Call Received
22 <CEP 000000> : Call Initiated : calledNumber() crv(0) total(0)
23 <Call 29> : ****************** Call Created status(InitiatedByFXO
) *******************
24 <CEP 000000> : Calling number()
25 <CEP 000000> : Call id(1d3e0300-854f-4c8a-8033-0002a40234f6) callNum(
29)
26 <Call 29> : MatchAllProcess After Sorted
<0> id(100) dest(217853) prefer(0) selected(25)
27 <Call 29> : Initiate callee with dial-peer(217853) status(CalleeDe
terminedAll) id(1d3e0300-854f-4c8a-8033-0002a40234f6)
28 <NetEP 29> : InitiateOutCall: calledNum(217853) callingNum() target
(10.10.10.213)
29 <NetEP 29> : DoCall: calledAddr(217853@10.10.10.213) callingAddr()
30 <H323 29> : local capabilities.
number of capabilities = 4
1 : g711ulaw-64k
2 : T.38
3 : UserInput/basicString
4 : UserInput/hookflash
Sending FastStart: id = 1 codec = g711ulaw-64k <1>
RTP (10.10.10.214:23058)
RTCP (10.10.10.214:23059)
Sending FastStart: id = 101 codec = g711ulaw-64k <1>
RTP (10.10.10.214:23058)
RTCP (10.10.10.214:23059)
31 <H225 29> : Try signalling TCP connect (10.10.10.213:1720)
32 <H225 29> : Signalling TCP connect success (29)
33 <Q931 29> : Send SETUP
<> UserInformation Encoding...
value H323-UserInformation ::=
{
h323-uu-pdu
{
h323-message-body setup :
{
protocolIdentifier { 0 0 8 2250 0 2 },
sourceAddress
{
h323-ID : "voip.10.10.10.214"
},
sourceInfo
{
vendor
{
vendor
{
t35CountryCode 97,
t35Extension 0,
manufacturerCode 22
},
productId '41646450616320566F4950'H,
versionId '382E3132'H
},
gateway
{
},
mc FALSE,
undefinedNode FALSE
},
destinationAddress
{
e164 : "217853"
},
destCallSignalAddress ipAddress :
{
ip '0A0A0AD5'H,
port 1720
},
activeMC FALSE,
conferenceID '1D3E0300099A7FD580320002A40234F6'H,
conferenceGoal create : NULL,
callType pointToPoint : NULL,
sourceCallSignalAddress ipAddress :
{
ip '0A0A0AD6'H,
port 14026
},
callIdentifier
{
guid '1D3E0300854F4C8A80330002A40234F6'H
},
fastStart
{
'400000060401004C60138011140001000A0A0AD65A12000A0A0AD65A13'H,
'0000640C6013800A040001000A0A0AD65A13'H
},
mediaWaitForConnect FALSE,
canOverlapSend FALSE
},
h245Tunneling TRUE
}
}
212509 : Sending H225 PDU to (10.10.10.213:1720) from 14026
{
protocolDiscriminator = 8
callReference = 12981
from = originator
messageType = Setup
bearerCapability = {
80 90 a3 ...
}
display = {
76 6f 69 70 2e 31 30 2e 31 30 2e 31 30 2e 32 31 voip.10.10.10.21
34 00 4.
}
calledPartyNumber = {
81 32 31 37 38 35 33 .217853
}
userUser = {
20 b8 06 00 08 91 4a 00 02 01 40 10 00 76 00 6f .....J...@..v.o
00 69 00 70 00 2e 00 31 00 30 00 2e 00 31 00 30 .i.p...1.0...1.0
00 2e 00 31 00 30 00 2e 00 32 00 31 00 34 28 c0 ...1.0...2.1.4(.
61 00 00 16 0a 41 64 64 50 61 63 20 56 6f 49 50 a....AddPac VoIP
03 38 2e 31 32 00 01 02 80 54 ab 86 00 0a 0a 0a .8.12....T......
d5 06 b8 00 1d 3e 03 00 09 9a 7f d5 80 32 00 02 .....>.......2..
a4 02 34 f6 00 4d 1c 07 00 0a 0a 0a d6 36 ca 11 ..4..M.......6..
00 1d 3e 03 00 85 4f 4c 8a 80 33 00 02 a4 02 34 ..>...OL..3....4
f6 32 02 1d 40 00 00 06 04 01 00 4c 60 13 80 11 .2..@......L`...
14 00 01 00 0a 0a 0a d6 5a 12 00 0a 0a 0a d6 5a ........Z......Z
13 12 00 00 64 0c 60 13 80 0a 04 00 01 00 0a 0a ....d.`.........
0a d6 5a 13 01 00 01 00 06 80 01 80 ..Z.........
}
}
08 02 32 b5 05 04 03 80 90 a3 28 12 76 6f 69 70 ..2.......(.voip
2e 31 30 2e 31 30 2e 31 30 2e 32 31 34 00 70 07 .10.10.10.214.p.
81 32 31 37 38 35 33 7e 00 bd 05 20 b8 06 00 08 .217853~... ....
91 4a 00 02 01 40 10 00 76 00 6f 00 69 00 70 00 .J...@..v.o.i.p.
2e 00 31 00 30 00 2e 00 31 00 30 00 2e 00 31 00 ..1.0...1.0...1.
30 00 2e 00 32 00 31 00 34 28 c0 61 00 00 16 0a 0...2.1.4(.a....
41 64 64 50 61 63 20 56 6f 49 50 03 38 2e 31 32 AddPac VoIP.8.12
00 01 02 80 54 ab 86 00 0a 0a 0a d5 06 b8 00 1d ....T...........
3e 03 00 09 9a 7f d5 80 32 00 02 a4 02 34 f6 00 >.......2....4..
4d 1c 07 00 0a 0a 0a d6 36 ca 11 00 1d 3e 03 00 M.......6....>..
85 4f 4c 8a 80 33 00 02 a4 02 34 f6 32 02 1d 40 .OL..3....4.2..@
00 00 06 04 01 00 4c 60 13 80 11 14 00 01 00 0a ......L`........
0a 0a d6 5a 12 00 0a 0a 0a d6 5a 13 12 00 00 64 ...Z......Z....d
0c 60 13 80 0a 04 00 01 00 0a 0a 0a d6 5a 13 01 .`...........Z..
00 01 00 06 80 01 80 .......
34 <H225 29> : Signalling channel closed
35 <Call 29> : Terminated from(ffffffff) this(Local:AbortedDestinati
on) before(NULL) forced(0)
36 <NetEP 29> : Call TO <217853> terminated reason(Local:AbortedDestin
ation)
------------------------
AP200# 21 <CEP 000000> : Call Received
22 <CEP 000000> : Call Initiated : calledNumber() crv(0) total(0)
23 <Call 29> : ****************** Call Created status(InitiatedByFXO
) *******************
24 <CEP 000000> : Calling number()
25 <CEP 000000> : Call id(1d3e0300-854f-4c8a-8033-0002a40234f6) callNum(
29)
26 <Call 29> : MatchAllProcess After Sorted
<0> id(100) dest(217853) prefer(0) selected(25)
27 <Call 29> : Initiate callee with dial-peer(217853) status(CalleeDe
terminedAll) id(1d3e0300-854f-4c8a-8033-0002a40234f6)
28 <NetEP 29> : InitiateOutCall: calledNum(217853) callingNum() target
(10.10.10.213)
29 <NetEP 29> : DoCall: calledAddr(217853@10.10.10.213) callingAddr()
30 <H323 29> : local capabilities.
number of capabilities = 4
1 : g711ulaw-64k
2 : T.38
3 : UserInput/basicString
4 : UserInput/hookflash
Sending FastStart: id = 1 codec = g711ulaw-64k <1>
RTP (10.10.10.214:23058)
RTCP (10.10.10.214:23059)
Sending FastStart: id = 101 codec = g711ulaw-64k <1>
RTP (10.10.10.214:23058)
RTCP (10.10.10.214:23059)
31 <H225 29> : Try signalling TCP connect (10.10.10.213:1720)
32 <H225 29> : Signalling TCP connect success (29)
33 <Q931 29> : Send SETUP
<> UserInformation Encoding...
value H323-UserInformation ::=
{
h323-uu-pdu
{
h323-message-body setup :
{
protocolIdentifier { 0 0 8 2250 0 2 },
sourceAddress
{
h323-ID : "voip.10.10.10.214"
},
sourceInfo
{
vendor
{
vendor
{
t35CountryCode 97,
t35Extension 0,
manufacturerCode 22
},
productId '41646450616320566F4950'H,
versionId '382E3132'H
},
gateway
{
},
mc FALSE,
undefinedNode FALSE
},
destinationAddress
{
e164 : "217853"
},
destCallSignalAddress ipAddress :
{
ip '0A0A0AD5'H,
port 1720
},
activeMC FALSE,
conferenceID '1D3E0300099A7FD580320002A40234F6'H,
conferenceGoal create : NULL,
callType pointToPoint : NULL,
sourceCallSignalAddress ipAddress :
{
ip '0A0A0AD6'H,
port 14026
},
callIdentifier
{
guid '1D3E0300854F4C8A80330002A40234F6'H
},
fastStart
{
'400000060401004C60138011140001000A0A0AD65A12000A0A0AD65A13'H,
'0000640C6013800A040001000A0A0AD65A13'H
},
mediaWaitForConnect FALSE,
canOverlapSend FALSE
},
h245Tunneling TRUE
}
}
212509 : Sending H225 PDU to (10.10.10.213:1720) from 14026
{
protocolDiscriminator = 8
callReference = 12981
from = originator
messageType = Setup
bearerCapability = {
80 90 a3 ...
}
display = {
76 6f 69 70 2e 31 30 2e 31 30 2e 31 30 2e 32 31 voip.10.10.10.21
34 00 4.
}
calledPartyNumber = {
81 32 31 37 38 35 33 .217853
}
userUser = {
20 b8 06 00 08 91 4a 00 02 01 40 10 00 76 00 6f .....J...@..v.o
00 69 00 70 00 2e 00 31 00 30 00 2e 00 31 00 30 .i.p...1.0...1.0
00 2e 00 31 00 30 00 2e 00 32 00 31 00 34 28 c0 ...1.0...2.1.4(.
61 00 00 16 0a 41 64 64 50 61 63 20 56 6f 49 50 a....AddPac VoIP
03 38 2e 31 32 00 01 02 80 54 ab 86 00 0a 0a 0a .8.12....T......
d5 06 b8 00 1d 3e 03 00 09 9a 7f d5 80 32 00 02 .....>.......2..
a4 02 34 f6 00 4d 1c 07 00 0a 0a 0a d6 36 ca 11 ..4..M.......6..
00 1d 3e 03 00 85 4f 4c 8a 80 33 00 02 a4 02 34 ..>...OL..3....4
f6 32 02 1d 40 00 00 06 04 01 00 4c 60 13 80 11 .2..@......L`...
14 00 01 00 0a 0a 0a d6 5a 12 00 0a 0a 0a d6 5a ........Z......Z
13 12 00 00 64 0c 60 13 80 0a 04 00 01 00 0a 0a ....d.`.........
0a d6 5a 13 01 00 01 00 06 80 01 80 ..Z.........
}
}
08 02 32 b5 05 04 03 80 90 a3 28 12 76 6f 69 70 ..2.......(.voip
2e 31 30 2e 31 30 2e 31 30 2e 32 31 34 00 70 07 .10.10.10.214.p.
81 32 31 37 38 35 33 7e 00 bd 05 20 b8 06 00 08 .217853~... ....
91 4a 00 02 01 40 10 00 76 00 6f 00 69 00 70 00 .J...@..v.o.i.p.
2e 00 31 00 30 00 2e 00 31 00 30 00 2e 00 31 00 ..1.0...1.0...1.
30 00 2e 00 32 00 31 00 34 28 c0 61 00 00 16 0a 0...2.1.4(.a....
41 64 64 50 61 63 20 56 6f 49 50 03 38 2e 31 32 AddPac VoIP.8.12
00 01 02 80 54 ab 86 00 0a 0a 0a d5 06 b8 00 1d ....T...........
3e 03 00 09 9a 7f d5 80 32 00 02 a4 02 34 f6 00 >.......2....4..
4d 1c 07 00 0a 0a 0a d6 36 ca 11 00 1d 3e 03 00 M.......6....>..
85 4f 4c 8a 80 33 00 02 a4 02 34 f6 32 02 1d 40 .OL..3....4.2..@
00 00 06 04 01 00 4c 60 13 80 11 14 00 01 00 0a ......L`........
0a 0a d6 5a 12 00 0a 0a 0a d6 5a 13 12 00 00 64 ...Z......Z....d
0c 60 13 80 0a 04 00 01 00 0a 0a 0a d6 5a 13 01 .`...........Z..
00 01 00 06 80 01 80 .......
34 <H225 29> : Signalling channel closed
35 <Call 29> : Terminated from(ffffffff) this(Local:AbortedDestinati
on) before(NULL) forced(0)
36 <NetEP 29> : Call TO <217853> terminated reason(Local:AbortedDestin
ation)
Логи
Вот лог с ТАУ
----
Jan 1 00:00:25 10.10.10.213 dnsmasq[352]: started, version 2.52 cachesize 150
Jan 1 00:03:55 10.10.10.213 dnsmasq[352]: overflow: 6 log entries lost
Jan 1 00:03:55 10.10.10.213 dnsmasq[514]: started, version 2.52 cachesize 150
Jan 1 00:03:55 10.10.10.213 dnsmasq[514]: compile time options: IPv6 GNU-getopt no-DBus no-I18N no-DHCP no-TFTP
Jan 1 00:03:55 10.10.10.213 dnsmasq[514]: reading /etc/resolv.conf
Jan 1 00:03:55 10.10.10.213 dnsmasq[514]: using nameserver 192.168.0.1#53
Jan 1 00:03:55 10.10.10.213 dnsmasq[514]: ignoring nameserver 127.0.0.1 - local interface
Jan 1 00:03:55 10.10.10.213 dnsmasq[514]: read /etc/hosts - 3 addresses
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]sqlite3_ports_config_load
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param2 = 217853
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param3 = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param4 = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param5 = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param7 = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param8 = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param9 =
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param10 = Eltex_User
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param13 = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param14 = 400
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param15 = 200
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param19 =
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param21 = -7.0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param22 = 0.0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param24 = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param25 = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param26 = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param27 = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param28 = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]sqlite3_codecs_config_load
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]codec No1 - enabled = 1
Jan 1 00:04:24 10.10.10.213 pbx: [app:info] priority = 2
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]codec No2 - enabled = 1
Jan 1 00:04:24 10.10.10.213 pbx: [app:info] priority = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]codec No3 - enabled = 1
Jan 1 00:04:24 10.10.10.213 pbx: [app:info] priority = 3
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]codec No4 - enabled = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]codec No5 - enabled = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]codec No6 - enabled = 1
Jan 1 00:04:24 10.10.10.213 pbx: [app:info] priority = 1
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]codec No7 - enabled = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param2 = 101
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param3 = 20
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param4 = 0
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param5 = INFO
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param6 = rfc2833
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param7 = G.711A
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param8 = Off
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param9 = 1
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param10 = 1
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param11 = G.711A
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param15 = Redundancy
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param16 = Adaptive
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param17 = (null)
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param18 = 4
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param19 = (null)
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param20 = (null)
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param21 = (null)
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]sqlite3_range_config_load
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param1 = 22000
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param2 = 23896
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param3 = 20896
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param4 = 20000
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param5 = 21896
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param6 = 21000
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param7 = 0
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param8 = 0
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]sqlite3_h323_config_load
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param1 = 1
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param2 = 0
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param3 = 0
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param4 = 0
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param6 = Eltex_H323
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param7 = 0
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param8 = 300
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param9 = 60
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param10 = 0
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param11 = 0
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param12 = h323password
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param13 = H.245_Alphanumeric
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param14 = Speech
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]sqlite3_routes_load - start
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Getting regex expression string
Jan 1 00:04:26 10.10.10.213 pbx: [app:dbg]loopwd - starting
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]parsing regex line : S3, L3 (<:108>XX.@10.10.10.214)
Jan 1 00:04:26 10.10.10.213 pbx: [app:info] global timeouts: S=3, L=3, T=-1
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]end of parsing regex line
Jan 1 00:04:26 10.10.10.213 pbx: [app:dbg]Config loaded.
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]SLIC: 2 DAA: 0
Jan 1 00:04:26 10.10.10.213 pbx: [app:dbg]vpStart in Polling Mode
Jan 1 00:04:26 10.10.10.213 pbx: [app:dbg]===>DSP: iad_vp_init....
Jan 1 00:04:26 10.10.10.213 pbx: [app:dbg]===>DSP: iad_vp_init() completed
Jan 1 00:04:26 10.10.10.213 pbx: [app:dbg] RTP protocol initialized
Jan 1 00:04:26 10.10.10.213 pbx: [app:dbg]Api_iad_telports_init: 1
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]net_initX
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Services found.
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]'VoIP' service.
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]'Internet' service.
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Internet service used.
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]VoIP service used.
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Internet ifname 'br1'.
Jan 1 00:04:26 10.10.10.213 pbx: [app:info] VoIP ifname 'eth0.102'.
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Signaling interface: eth0.102
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Init eth0.102 interface
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Local addr: D50A0A0A
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Closing sqlite3 data base...
Jan 1 00:04:26 10.10.10.213 pbx: [app:dbg]open_led_control
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]LED control device opened.
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]pbx_h323_init
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]H323 client started
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Reset port calls
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]wan 'eth0.102' : MAC A8:F9:4B:03:A5:68
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]cname = '217853@10.10.10.213'
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Modem codec: U-law(default)
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Suppress OFF
Jan 1 00:04:26 10.10.10.213 pbx: [app:dbg]net_check - starting
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]prefix num 0
Jan 1 00:04:26 10.10.10.213 pbx: [app:dbg]h323_regex_redirect: return 0
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]BEARER: 0
Jan 1 00:04:26 10.10.10.213 pbx: [h323]Error: Failed to set tcp ports- Max port number less than Start port number
Jan 1 00:04:26 10.10.10.213 pbx: [h323]UDP port range initialize - successful
Jan 1 00:04:26 10.10.10.213 pbx: [h323]RTP port range initialize - successful
Jan 1 00:04:26 10.10.10.213 pbx: [h323]Signalling IP address is set to 10.10.10.213
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Tunneling enabled
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Faststart enabled
Jan 1 00:04:26 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G711ULAW64K.
Jan 1 00:04:26 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G7231.
Jan 1 00:04:26 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G711ALAW64K.
Jan 1 00:04:26 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G729.
Jan 1 00:04:26 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G729ANNEXA.
Jan 1 00:04:26 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G729WANNEXB.
Jan 1 00:04:26 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G729ANNEXAWANNEXB.
Jan 1 00:04:26 10.10.10.213 pbx: [h323]add_dtmf_capability: Enter
Jan 1 00:04:26 10.10.10.213 pbx: [h323]Enabled RFC2833 DTMF capability for end-point
Jan 1 00:04:26 10.10.10.213 pbx: [h323]Disabled RFC2833 DTMF capability for end-point
Jan 1 00:04:26 10.10.10.213 pbx: [h323]Dtmf mode set to H.245(alphanumeric) for endpoint
Jan 1 00:04:26 10.10.10.213 pbx: [h323]add_dtmf_capability: dtmf transfer - H245 Alphanumeric
Jan 1 00:04:26 10.10.10.213 pbx: [h323]Creating CMD listener at 10.10.10.213:7575
Jan 1 00:04:26 10.10.10.213 pbx: [h323]CMD listener creation - successful
Jan 1 00:04:26 10.10.10.213 pbx: [h323]H323 listener creation - successful
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Start monitor channels
Jan 1 00:04:26 10.10.10.213 pbx: [h323]H.323 Endpoint Configuration is as follows:
Jan 1 00:04:26 10.10.10.213 pbx: [h323] FastStart - enabled
Jan 1 00:04:26 10.10.10.213 pbx: [h323] H245 Tunneling - enabled
Jan 1 00:04:26 10.10.10.213 pbx: [h323] AutoAnswer - disabled
Jan 1 00:04:26 10.10.10.213 pbx: [h323] Terminal Type - 50
Jan 1 00:04:26 10.10.10.213 pbx: [h323] T35 CountryCode - 7
Jan 1 00:04:26 10.10.10.213 pbx: [h323] T35 Extension - 0
Jan 1 00:04:26 10.10.10.213 pbx: [h323] Manufacturer Code - 71
Jan 1 00:04:26 10.10.10.213 pbx: [h323] ProductID - TAU-1.ip
Jan 1 00:04:26 10.10.10.213 pbx: [h323] VersionID - v0.8
Jan 1 00:04:26 10.10.10.213 pbx: [h323] Local signalling IP address - 10.10.10.213
Jan 1 00:04:26 10.10.10.213 pbx: [h323] H225 ListenPort - 1720
Jan 1 00:04:26 10.10.10.213 pbx: [h323] CallerID - Eltex_H323
Jan 1 00:04:26 10.10.10.213 pbx: [h323] Call Establishment Timeout - 60 seconds
Jan 1 00:04:26 10.10.10.213 pbx: [h323] MasterSlaveDetermination Timeout - 30 seconds
Jan 1 00:04:26 10.10.10.213 pbx: [h323] TerminalCapabilityExchange Timeout - 30 seconds
Jan 1 00:04:26 10.10.10.213 pbx: [h323] LogicalChannel Timeout - 30 seconds
Jan 1 00:04:26 10.10.10.213 pbx: [h323] Session Timeout - 15 seconds
Jan 1 00:04:26 10.10.10.213 pbx: [app:dbg]set_gain_settings...
Jan 1 00:04:31 10.10.10.213 pbx: [h323]New connection at H225 receiver
Jan 1 00:04:31 10.10.10.213 pbx: [h323]Created a new call (incoming, HI0000000)
Jan 1 00:04:31 10.10.10.213 pbx: [app:info]osEpOnNewCallCreated: created new incoming call HI0000000
Jan 1 00:04:31 10.10.10.213 pbx: [h323]ooH2250Receive
Jan 1 00:04:31 10.10.10.213 pbx: [h323]Receiving H.2250 message (incoming, HI0000000)
Jan 1 00:04:31 10.10.10.213 pbx: [h323]Received Q.931 message: (incoming, HI0000000)
Jan 1 00:04:31 10.10.10.213 pbx: [h323]Received H.2250 Message = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] protocolDiscriminator = 8
Jan 1 00:04:31 10.10.10.213 pbx: [h323] callReference = 12982
Jan 1 00:04:31 10.10.10.213 pbx: [h323] from = originator
Jan 1 00:04:31 10.10.10.213 pbx: [h323] messageType = 5
Jan 1 00:04:31 10.10.10.213 pbx: [h323] Bearer-Capability IE = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] '8090a3'H
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] Display IE = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] voip.10.10.10.214
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] CalledPartyNumber IE = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 217853
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] h323_uu_pdu = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] h323_message_body = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] setup = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] protocolIdentifier = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 0 0 8 2250 0 2
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] sourceAddress = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] elem[0] = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] h323_ID = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] voip.10.10.10.214
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] sourceInfo = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] vendor = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] vendor = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] t35CountryCode = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 97
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] t35Extension = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 0
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] manufacturerCode = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 22
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] productId = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] '41646450616320566f4950'H
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] versionId = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] '382e3132'H
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] gateway = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] mc = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] FALSE
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] undefinedNode = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] FALSE
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] destinationAddress = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] elem[0] = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] dialedDigits = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] "217853"
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] destCallSignalAddress = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] ipAddress = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] ip = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] '0a0a0ad5'H
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] port = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 1720
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] activeMC = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] FALSE
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] conferenceID = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 'c73e03004138a49180340002a40234f6'H
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] conferenceGoal = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] create = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] NULL
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] callType = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] pointToPoint = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] NULL
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] sourceCallSignalAddress = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] ipAddress = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] ip = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] '0a0a0ad6'H
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] port = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 14027
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] callIdentifier = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] guid = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 'c73e0300204abe0b80350002a40234f6'H
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] fastStart = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] elem[0] = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] '400000060401004c60138011140001000a0a0ad65a14000a0a0ad65a15'H
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] elem[1] = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] '0000640c6013800a040001000a0a0ad65a15'H
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] mediaWaitForConnect = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] FALSE
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] canOverlapSend = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] FALSE
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] h245Tunneling = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] TRUE
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323]UUIE decode successful
Jan 1 00:04:31 10.10.10.213 pbx: [h323]Decoded Q931 message (incoming, HI0000000)
Jan 1 00:04:31 10.10.10.213 pbx: [h323]}
Jan 1 00:04:31 10.10.10.213 pbx: [h323]ooHandleH2250Message(5)
Jan 1 00:04:31 10.10.10.213 pbx: [h323]Received SETUP message (incoming, HI0000000)
Jan 1 00:04:31 10.10.10.213 pbx: [h323]Warn: Aliases is present (incoming, HI0000000)
Jan 1 00:04:31 10.10.10.213 pbx: [h323]Destination aliases is present(1 items)
Jan 1 00:04:31 10.10.10.213 pbx: [h323]Warn: Aliases is present (incoming, HI0000000)
Jan 1 00:04:31 10.10.10.213 pbx: [h323]Received alias: 217853
Jan 1 00:04:31 10.10.10.213 pbx: [h323]New called party number: 217853
Jan 1 00:04:31 10.10.10.213 pbx: [h323]Call has tunneling active (incoming,HI0000000)
Jan 1 00:04:31 10.10.10.213 pbx: [h323]FastStart enabled for call(incoming, HI0000000)
Jan 1 00:04:31 10.10.10.213 pbx: [h323]FastStart Elements = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] forwardLogicalChannelNumber = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 1
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] forwardLogicalChannelParameters = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] dataType = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] nullData = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] NULL
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] multiplexParameters = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] none = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] NULL
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] reverseLogicalChannelParameters = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] dataType = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] audioData = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] g711Ulaw64k = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 20
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] multiplexParameters = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] h2250LogicalChannelParameters = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] sessionID = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 1
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] mediaChannel = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] unicastAddress = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] iPAddress = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] network = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] '0a0a0ad6'H
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] tsapIdentifier = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 23060
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] mediaControlChannel = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] unicastAddress = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] iPAddress = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] network = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] '0a0a0ad6'H
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] tsapIdentifier = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 23061
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] forwardLogicalChannelNumber = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 101
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] forwardLogicalChannelParameters = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] dataType = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] audioData = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] g711Ulaw64k = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 20
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] multiplexParameters = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] h2250LogicalChannelParameters = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] sessionID = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 1
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] mediaControlChannel = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] unicastAddress = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] iPAddress = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] network = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] '0a0a0ad6'H
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] tsapIdentifier = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] 23061
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323]}
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]osEpOnReceivedSetup: call HI0000000: received setup message to 217853
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]our num: 217853 requested: 217853
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]osEpAddMediaInfo: call HI0000000: adding media info
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]osEpAddMediaInfo: call HI0000000: rtp port: 14000
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]osEpAddMediaInfo: call HI0000000: rtcp port: 14001
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G729 (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G729 (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G729ANNEXAWANNEXB (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G729ANNEXAWANNEXB (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G729ANNEXA (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G729ANNEXA (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G729WANNEXB (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G729WANNEXB (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G7231 (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G7231 (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G728 (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G728 (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G711ALAW64K (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G711ALAW64K (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G711ULAW64K (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G711ULAW64K (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_T38 (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_T38 (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Building CallProceeding (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Built Call Proceeding(incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]UserInfo encoding - successful
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Q931 Message = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] protocolDiscriminator = 8
Jan 1 00:04:32 10.10.10.213 pbx: [h323] callReference = 12982
Jan 1 00:04:32 10.10.10.213 pbx: [h323] from = destination
Jan 1 00:04:32 10.10.10.213 pbx: [h323] messageType = 2
Jan 1 00:04:32 10.10.10.213 pbx: [h323] Display IE = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] Eltex_H323
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] h323_uu_pdu = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] h323_message_body = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] callProceeding = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] protocolIdentifier = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] 0 0 8 2250 0 4
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] destinationInfo = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] vendor = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] vendor = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] t35CountryCode = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] 7
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] t35Extension = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] 0
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] manufacturerCode = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] 71
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] productId = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] '5441552d312e6970'H
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] versionId = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] '76302e38'H
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] terminal = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] mc = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] FALSE
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] undefinedNode = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] FALSE
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] callIdentifier = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] guid = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] 'c73e0300204abe0b80350002a40234f6'H
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] multipleCalls = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] FALSE
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] maintainConnection = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] FALSE
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] h245Tunneling = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] TRUE
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323]UUIE decode successful
Jan 1 00:04:32 10.10.10.213 pbx: [h323]}
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Queued H225 messages 1. (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]osEpOnIncomingCall: call HI0000000 (00000000) called
Jan 1 00:04:32 10.10.10.213 pbx: [app:dbg]1) port: incoming call from (null):10.10.10.214(voip.10.10.10.214)
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Open Default Channel
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Codec type: 0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Send monitor data: both ACTIVE
Jan 1 00:04:32 10.10.10.213 pbx: [app:dbg]jb_tune: epHnd=0.
Jan 1 00:04:32 10.10.10.213 pbx: [app:dbg]Jitter buffer new params: | adapt_jb_enable = 1 | low_threshold = 1 | nominal_threshold = 4 | high_threshold = 20 | loss_threshold = 0 | fax_threshold = 20 | response_time = 1
Jan 1 00:04:32 10.10.10.213 pbx: [app:dbg]create_new_call
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]port ringing(0)
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]h323_on_free: call 00000000: port alerting
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]call HI0000000 (00000000) ringing back
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]from state 0 to 5
Jan 1 00:04:32 10.10.10.213 pbx: [app:dbg]msec=-2123364384
Jan 1 00:04:32 10.10.10.213 pbx: [app:dbg]dummy handler
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]sqlite3_ports_config_load
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param2 = 217853
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param3 = 0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param4 = 0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param5 = 0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param7 = 0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param8 = 0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param9 =
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param10 = Eltex_User
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param13 = 0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param14 = 400
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param15 = 200
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param19 =
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param21 = -7.0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param22 = 0.0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param24 = 0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param25 = 0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param26 = 0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param27 = 0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param28 = 0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]sqlite3_codecs_config_load
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]codec No1 - enabled = 1
Jan 1 00:04:32 10.10.10.213 pbx: [app:info] priority = 2
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]codec No2 - enabled = 1
Jan 1 00:04:32 10.10.10.213 pbx: [app:info] priority = 0
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]codec No3 - enabled = 1
Jan 1 00:04:33 10.10.10.213 pbx: [app:info] priority = 3
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]codec No4 - enabled = 0
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]codec No5 - enabled = 0
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]codec No6 - enabled = 1
Jan 1 00:04:33 10.10.10.213 pbx: [app:info] priority = 1
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]codec No7 - enabled = 0
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param2 = 101
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param3 = 20
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param4 = 0
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param5 = INFO
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param6 = rfc2833
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param7 = G.711A
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param8 = Off
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param9 = 1
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param10 = 1
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param11 = G.711A
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param15 = Redundancy
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param16 = Adaptive
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param17 = (null)
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param18 = 4
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param19 = (null)
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param20 = (null)
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param21 = (null)
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]sqlite3_range_config_load
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param1 = 22000
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param2 = 23896
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param3 = 20896
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param4 = 20000
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param5 = 21896
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param6 = 21000
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param7 = 0
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param8 = 0
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]sqlite3_h323_config_load
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param1 = 1
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param2 = 0
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param3 = 0
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param4 = 0
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param6 = Eltex_H323
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param7 = 0
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param8 = 300
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param9 = 60
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param10 = 0
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param11 = 0
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param12 = h323password
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param13 = H.245_Alphanumeric
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param14 = Speech
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]sqlite3_routes_load - start
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Getting regex expression string
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]parsing regex line : S3, L3 (<:108>XX.@10.10.10.214)
Jan 1 00:04:34 10.10.10.213 pbx: [app:info] global timeouts: S=3, L=3, T=-1
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]end of parsing regex line
Jan 1 00:04:34 10.10.10.213 pbx: [app:dbg]Config loaded.
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]SLIC: 2 DAA: 0
Jan 1 00:04:34 10.10.10.213 pbx: [app:dbg]vpStart in Polling Mode
Jan 1 00:04:34 10.10.10.213 pbx: [app:dbg]===>DSP: iad_vp_init....
Jan 1 00:04:34 10.10.10.213 pbx: [app:dbg]===>DSP: iad_vp_init() completed
Jan 1 00:04:34 10.10.10.213 pbx: [app:dbg] RTP protocol initialized
Jan 1 00:04:34 10.10.10.213 pbx: [app:dbg]Api_iad_telports_init: 1
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]net_initX
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Services found.
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]'VoIP' service.
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]'Internet' service.
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Internet service used.
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]VoIP service used.
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Internet ifname 'br1'.
Jan 1 00:04:34 10.10.10.213 pbx: [app:info] VoIP ifname 'eth0.102'.
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Signaling interface: eth0.102
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Init eth0.102 interface
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Local addr: D50A0A0A
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Closing sqlite3 data base...
Jan 1 00:04:34 10.10.10.213 pbx: [app:dbg]open_led_control
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]LED control device opened.
Jan 1 00:04:34 10.10.10.213 pbx: [app:dbg]net_check - starting
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]pbx_h323_init
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]prefix num 0
Jan 1 00:04:34 10.10.10.213 pbx: [app:dbg]h323_regex_redirect: return 0
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]BEARER: 0
Jan 1 00:04:34 10.10.10.213 pbx: [h323]Error: Failed to set tcp ports- Max port number less than Start port number
Jan 1 00:04:34 10.10.10.213 pbx: [h323]UDP port range initialize - successful
Jan 1 00:04:34 10.10.10.213 pbx: [h323]RTP port range initialize - successful
Jan 1 00:04:34 10.10.10.213 pbx: [h323]Signalling IP address is set to 10.10.10.213
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Tunneling enabled
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Faststart enabled
Jan 1 00:04:34 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G711ULAW64K.
Jan 1 00:04:34 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G7231.
Jan 1 00:04:34 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G711ALAW64K.
Jan 1 00:04:34 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G729.
Jan 1 00:04:34 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G729ANNEXA.
Jan 1 00:04:34 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G729WANNEXB.
Jan 1 00:04:34 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G729ANNEXAWANNEXB.
Jan 1 00:04:34 10.10.10.213 pbx: [h323]add_dtmf_capability: Enter
Jan 1 00:04:34 10.10.10.213 pbx: [h323]Enabled RFC2833 DTMF capability for end-point
Jan 1 00:04:34 10.10.10.213 pbx: [h323]Disabled RFC2833 DTMF capability for end-point
Jan 1 00:04:34 10.10.10.213 pbx: [h323]Dtmf mode set to H.245(alphanumeric) for endpoint
Jan 1 00:04:34 10.10.10.213 pbx: [h323]add_dtmf_capability: dtmf transfer - H245 Alphanumeric
Jan 1 00:04:34 10.10.10.213 pbx: [h323]Creating CMD listener at 10.10.10.213:7575
Jan 1 00:04:34 10.10.10.213 pbx: [h323]CMD listener creation - successful
Jan 1 00:04:34 10.10.10.213 pbx: [h323]H323 listener creation - successful
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Start monitor channels
Jan 1 00:04:34 10.10.10.213 pbx: [h323]H.323 Endpoint Configuration is as follows:
Jan 1 00:04:34 10.10.10.213 pbx: [h323] FastStart - enabled
Jan 1 00:04:34 10.10.10.213 pbx: [h323] H245 Tunneling - enabled
Jan 1 00:04:34 10.10.10.213 pbx: [h323] AutoAnswer - disabled
Jan 1 00:04:34 10.10.10.213 pbx: [h323] Terminal Type - 50
Jan 1 00:04:34 10.10.10.213 pbx: [h323] T35 CountryCode - 7
Jan 1 00:04:34 10.10.10.213 pbx: [h323] T35 Extension - 0
Jan 1 00:04:34 10.10.10.213 pbx: [h323] Manufacturer Code - 71
Jan 1 00:04:34 10.10.10.213 pbx: [h323] ProductID - TAU-1.ip
Jan 1 00:04:34 10.10.10.213 pbx: [h323] VersionID - v0.8
Jan 1 00:04:34 10.10.10.213 pbx: [h323] Local signalling IP address - 10.10.10.213
Jan 1 00:04:34 10.10.10.213 pbx: [h323] H225 ListenPort - 1720
Jan 1 00:04:34 10.10.10.213 pbx: [h323] CallerID - Eltex_H323
Jan 1 00:04:34 10.10.10.213 pbx: [h323] Call Establishment Timeout - 60 seconds
Jan 1 00:04:34 10.10.10.213 pbx: [h323] MasterSlaveDetermination Timeout - 30 seconds
Jan 1 00:04:34 10.10.10.213 pbx: [h323] TerminalCapabilityExchange Timeout - 30 seconds
Jan 1 00:04:34 10.10.10.213 pbx: [h323] LogicalChannel Timeout - 30 seconds
Jan 1 00:04:34 10.10.10.213 pbx: [h323] Session Timeout - 15 seconds
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]H323 client started
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Reset port calls
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]wan 'eth0.102' : MAC A8:F9:4B:03:A5:68
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]cname = '217853@10.10.10.213'
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Modem codec: U-law(default)
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Suppress OFF
Jan 1 00:04:34 10.10.10.213 pbx: [app:dbg]set_gain_settings...
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Event: 0
Jan 1 00:04:34 10.10.10.213 pbx: [app:dbg]msec=0
Jan 1 00:04:34 10.10.10.213 pbx: [app:dbg]dummy handler
Jan 1 00:04:37 10.10.10.213 pbx: [app:dbg]msec=-2123363584
Jan 1 00:04:37 10.10.10.213 pbx: [app:dbg]dummy handler
Jan 1 00:04:38 10.10.10.213 pbx: [app:dbg]msec=-2123363584
Jan 1 00:04:38 10.10.10.213 pbx: [app:dbg]dummy handler
Jan 1 00:04:39 10.10.10.213 pbx: [app:dbg]msec=-2123363584
Jan 1 00:04:39 10.10.10.213 pbx: [app:info]port 0: offhook
Jan 1 00:04:39 10.10.10.213 pbx: [app:info]from state 0 to 1
Jan 1 00:04:39 10.10.10.213 pbx: [app:info]Open Default Channel
Jan 1 00:04:39 10.10.10.213 pbx: [app:info]Codec type: 0
Jan 1 00:04:39 10.10.10.213 pbx: [app:dbg]jb_tune: epHnd=0.
Jan 1 00:04:39 10.10.10.213 pbx: [app:dbg]Jitter buffer new params: | adapt_jb_enable = 1 | low_threshold = 1 | nominal_threshold = 4 | high_threshold = 20 | loss_threshold = 0 | fax_threshold = 20 | response_time = 1
Jan 1 00:04:39 10.10.10.213 pbx: [app:dbg]create_new_call
Jan 1 00:04:39 10.10.10.213 pbx: [app:info]Search for hotnumbers
Jan 1 00:04:39 10.10.10.213 pbx: [app:info]===> DSP-POLLING: isrPullMsgfrDSP... chnl = 0, evt_type = 2
Jan 1 00:04:39 10.10.10.213 pbx: [app:info]Event: 2
Jan 1 00:04:39 10.10.10.213 pbx: [app:info]Send monitor data: both ACTIVE
Jan 1 00:04:40 10.10.10.213 pbx: [app:info]port 0: onhook(hangup)
Jan 1 00:04:40 10.10.10.213 pbx: [app:info]from state 1 to 0
Jan 1 00:04:40 10.10.10.213 pbx: [app:info]===>DSP: iad_vp_epClose( ch: 0)
Jan 1 00:04:40 10.10.10.213 pbx: [app:info]Destroying call 0(665)0
Jan 1 00:04:40 10.10.10.213 pbx: [app:dbg]current thread locking mutex
Jan 1 00:04:40 10.10.10.213 pbx: [app:dbg]call deleting...........
Jan 1 00:04:40 10.10.10.213 pbx: [app:info]call deleted.
Jan 1 00:04:40 10.10.10.213 pbx: [app:info]Event: 0
Jan 1 00:04:49 10.10.10.213 pbx: [app:info]setGainRXTX
Jan 1 00:04:49 10.10.10.213 pbx: [app:info]Gain/attun values:
Jan 1 00:04:49 10.10.10.213 pbx: [app:info]TX: 0.0 -> 8000000
Jan 1 00:04:49 10.10.10.213 pbx: [app:info]RX: -7.0 -> e4b3b6
Jan 1 00:04:49 10.10.10.213 pbx: [app:info]TX: RAM 544 <-- 8000000
Jan 1 00:04:49 10.10.10.213 pbx: [app:info]RX: RAM 545 <-- e4b3b6
----
Jan 1 00:00:25 10.10.10.213 dnsmasq[352]: started, version 2.52 cachesize 150
Jan 1 00:03:55 10.10.10.213 dnsmasq[352]: overflow: 6 log entries lost
Jan 1 00:03:55 10.10.10.213 dnsmasq[514]: started, version 2.52 cachesize 150
Jan 1 00:03:55 10.10.10.213 dnsmasq[514]: compile time options: IPv6 GNU-getopt no-DBus no-I18N no-DHCP no-TFTP
Jan 1 00:03:55 10.10.10.213 dnsmasq[514]: reading /etc/resolv.conf
Jan 1 00:03:55 10.10.10.213 dnsmasq[514]: using nameserver 192.168.0.1#53
Jan 1 00:03:55 10.10.10.213 dnsmasq[514]: ignoring nameserver 127.0.0.1 - local interface
Jan 1 00:03:55 10.10.10.213 dnsmasq[514]: read /etc/hosts - 3 addresses
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]sqlite3_ports_config_load
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param2 = 217853
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param3 = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param4 = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param5 = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param7 = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param8 = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param9 =
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param10 = Eltex_User
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param13 = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param14 = 400
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param15 = 200
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param19 =
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param21 = -7.0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param22 = 0.0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param24 = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param25 = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param26 = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param27 = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param28 = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]sqlite3_codecs_config_load
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]codec No1 - enabled = 1
Jan 1 00:04:24 10.10.10.213 pbx: [app:info] priority = 2
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]codec No2 - enabled = 1
Jan 1 00:04:24 10.10.10.213 pbx: [app:info] priority = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]codec No3 - enabled = 1
Jan 1 00:04:24 10.10.10.213 pbx: [app:info] priority = 3
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]codec No4 - enabled = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]codec No5 - enabled = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]codec No6 - enabled = 1
Jan 1 00:04:24 10.10.10.213 pbx: [app:info] priority = 1
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]codec No7 - enabled = 0
Jan 1 00:04:24 10.10.10.213 pbx: [app:info]Param2 = 101
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param3 = 20
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param4 = 0
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param5 = INFO
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param6 = rfc2833
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param7 = G.711A
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param8 = Off
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param9 = 1
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param10 = 1
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param11 = G.711A
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param15 = Redundancy
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param16 = Adaptive
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param17 = (null)
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param18 = 4
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param19 = (null)
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param20 = (null)
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param21 = (null)
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]sqlite3_range_config_load
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param1 = 22000
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param2 = 23896
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param3 = 20896
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param4 = 20000
Jan 1 00:04:25 10.10.10.213 pbx: [app:info]Param5 = 21896
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param6 = 21000
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param7 = 0
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param8 = 0
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]sqlite3_h323_config_load
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param1 = 1
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param2 = 0
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param3 = 0
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param4 = 0
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param6 = Eltex_H323
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param7 = 0
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param8 = 300
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param9 = 60
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param10 = 0
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param11 = 0
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param12 = h323password
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param13 = H.245_Alphanumeric
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Param14 = Speech
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]sqlite3_routes_load - start
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Getting regex expression string
Jan 1 00:04:26 10.10.10.213 pbx: [app:dbg]loopwd - starting
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]parsing regex line : S3, L3 (<:108>XX.@10.10.10.214)
Jan 1 00:04:26 10.10.10.213 pbx: [app:info] global timeouts: S=3, L=3, T=-1
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]end of parsing regex line
Jan 1 00:04:26 10.10.10.213 pbx: [app:dbg]Config loaded.
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]SLIC: 2 DAA: 0
Jan 1 00:04:26 10.10.10.213 pbx: [app:dbg]vpStart in Polling Mode
Jan 1 00:04:26 10.10.10.213 pbx: [app:dbg]===>DSP: iad_vp_init....
Jan 1 00:04:26 10.10.10.213 pbx: [app:dbg]===>DSP: iad_vp_init() completed
Jan 1 00:04:26 10.10.10.213 pbx: [app:dbg] RTP protocol initialized
Jan 1 00:04:26 10.10.10.213 pbx: [app:dbg]Api_iad_telports_init: 1
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]net_initX
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Services found.
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]'VoIP' service.
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]'Internet' service.
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Internet service used.
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]VoIP service used.
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Internet ifname 'br1'.
Jan 1 00:04:26 10.10.10.213 pbx: [app:info] VoIP ifname 'eth0.102'.
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Signaling interface: eth0.102
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Init eth0.102 interface
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Local addr: D50A0A0A
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Closing sqlite3 data base...
Jan 1 00:04:26 10.10.10.213 pbx: [app:dbg]open_led_control
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]LED control device opened.
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]pbx_h323_init
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]H323 client started
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Reset port calls
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]wan 'eth0.102' : MAC A8:F9:4B:03:A5:68
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]cname = '217853@10.10.10.213'
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Modem codec: U-law(default)
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Suppress OFF
Jan 1 00:04:26 10.10.10.213 pbx: [app:dbg]net_check - starting
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]prefix num 0
Jan 1 00:04:26 10.10.10.213 pbx: [app:dbg]h323_regex_redirect: return 0
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]BEARER: 0
Jan 1 00:04:26 10.10.10.213 pbx: [h323]Error: Failed to set tcp ports- Max port number less than Start port number
Jan 1 00:04:26 10.10.10.213 pbx: [h323]UDP port range initialize - successful
Jan 1 00:04:26 10.10.10.213 pbx: [h323]RTP port range initialize - successful
Jan 1 00:04:26 10.10.10.213 pbx: [h323]Signalling IP address is set to 10.10.10.213
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Tunneling enabled
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Faststart enabled
Jan 1 00:04:26 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G711ULAW64K.
Jan 1 00:04:26 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G7231.
Jan 1 00:04:26 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G711ALAW64K.
Jan 1 00:04:26 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G729.
Jan 1 00:04:26 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G729ANNEXA.
Jan 1 00:04:26 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G729WANNEXB.
Jan 1 00:04:26 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G729ANNEXAWANNEXB.
Jan 1 00:04:26 10.10.10.213 pbx: [h323]add_dtmf_capability: Enter
Jan 1 00:04:26 10.10.10.213 pbx: [h323]Enabled RFC2833 DTMF capability for end-point
Jan 1 00:04:26 10.10.10.213 pbx: [h323]Disabled RFC2833 DTMF capability for end-point
Jan 1 00:04:26 10.10.10.213 pbx: [h323]Dtmf mode set to H.245(alphanumeric) for endpoint
Jan 1 00:04:26 10.10.10.213 pbx: [h323]add_dtmf_capability: dtmf transfer - H245 Alphanumeric
Jan 1 00:04:26 10.10.10.213 pbx: [h323]Creating CMD listener at 10.10.10.213:7575
Jan 1 00:04:26 10.10.10.213 pbx: [h323]CMD listener creation - successful
Jan 1 00:04:26 10.10.10.213 pbx: [h323]H323 listener creation - successful
Jan 1 00:04:26 10.10.10.213 pbx: [app:info]Start monitor channels
Jan 1 00:04:26 10.10.10.213 pbx: [h323]H.323 Endpoint Configuration is as follows:
Jan 1 00:04:26 10.10.10.213 pbx: [h323] FastStart - enabled
Jan 1 00:04:26 10.10.10.213 pbx: [h323] H245 Tunneling - enabled
Jan 1 00:04:26 10.10.10.213 pbx: [h323] AutoAnswer - disabled
Jan 1 00:04:26 10.10.10.213 pbx: [h323] Terminal Type - 50
Jan 1 00:04:26 10.10.10.213 pbx: [h323] T35 CountryCode - 7
Jan 1 00:04:26 10.10.10.213 pbx: [h323] T35 Extension - 0
Jan 1 00:04:26 10.10.10.213 pbx: [h323] Manufacturer Code - 71
Jan 1 00:04:26 10.10.10.213 pbx: [h323] ProductID - TAU-1.ip
Jan 1 00:04:26 10.10.10.213 pbx: [h323] VersionID - v0.8
Jan 1 00:04:26 10.10.10.213 pbx: [h323] Local signalling IP address - 10.10.10.213
Jan 1 00:04:26 10.10.10.213 pbx: [h323] H225 ListenPort - 1720
Jan 1 00:04:26 10.10.10.213 pbx: [h323] CallerID - Eltex_H323
Jan 1 00:04:26 10.10.10.213 pbx: [h323] Call Establishment Timeout - 60 seconds
Jan 1 00:04:26 10.10.10.213 pbx: [h323] MasterSlaveDetermination Timeout - 30 seconds
Jan 1 00:04:26 10.10.10.213 pbx: [h323] TerminalCapabilityExchange Timeout - 30 seconds
Jan 1 00:04:26 10.10.10.213 pbx: [h323] LogicalChannel Timeout - 30 seconds
Jan 1 00:04:26 10.10.10.213 pbx: [h323] Session Timeout - 15 seconds
Jan 1 00:04:26 10.10.10.213 pbx: [app:dbg]set_gain_settings...
Jan 1 00:04:31 10.10.10.213 pbx: [h323]New connection at H225 receiver
Jan 1 00:04:31 10.10.10.213 pbx: [h323]Created a new call (incoming, HI0000000)
Jan 1 00:04:31 10.10.10.213 pbx: [app:info]osEpOnNewCallCreated: created new incoming call HI0000000
Jan 1 00:04:31 10.10.10.213 pbx: [h323]ooH2250Receive
Jan 1 00:04:31 10.10.10.213 pbx: [h323]Receiving H.2250 message (incoming, HI0000000)
Jan 1 00:04:31 10.10.10.213 pbx: [h323]Received Q.931 message: (incoming, HI0000000)
Jan 1 00:04:31 10.10.10.213 pbx: [h323]Received H.2250 Message = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] protocolDiscriminator = 8
Jan 1 00:04:31 10.10.10.213 pbx: [h323] callReference = 12982
Jan 1 00:04:31 10.10.10.213 pbx: [h323] from = originator
Jan 1 00:04:31 10.10.10.213 pbx: [h323] messageType = 5
Jan 1 00:04:31 10.10.10.213 pbx: [h323] Bearer-Capability IE = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] '8090a3'H
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] Display IE = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] voip.10.10.10.214
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] CalledPartyNumber IE = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 217853
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] h323_uu_pdu = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] h323_message_body = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] setup = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] protocolIdentifier = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 0 0 8 2250 0 2
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] sourceAddress = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] elem[0] = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] h323_ID = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] voip.10.10.10.214
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] sourceInfo = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] vendor = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] vendor = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] t35CountryCode = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 97
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] t35Extension = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 0
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] manufacturerCode = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 22
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] productId = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] '41646450616320566f4950'H
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] versionId = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] '382e3132'H
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] gateway = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] mc = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] FALSE
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] undefinedNode = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] FALSE
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] destinationAddress = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] elem[0] = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] dialedDigits = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] "217853"
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] destCallSignalAddress = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] ipAddress = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] ip = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] '0a0a0ad5'H
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] port = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 1720
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] activeMC = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] FALSE
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] conferenceID = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 'c73e03004138a49180340002a40234f6'H
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] conferenceGoal = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] create = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] NULL
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] callType = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] pointToPoint = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] NULL
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] sourceCallSignalAddress = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] ipAddress = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] ip = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] '0a0a0ad6'H
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] port = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 14027
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] callIdentifier = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] guid = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 'c73e0300204abe0b80350002a40234f6'H
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] fastStart = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] elem[0] = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] '400000060401004c60138011140001000a0a0ad65a14000a0a0ad65a15'H
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] elem[1] = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] '0000640c6013800a040001000a0a0ad65a15'H
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] mediaWaitForConnect = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] FALSE
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] canOverlapSend = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] FALSE
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] h245Tunneling = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] TRUE
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323]UUIE decode successful
Jan 1 00:04:31 10.10.10.213 pbx: [h323]Decoded Q931 message (incoming, HI0000000)
Jan 1 00:04:31 10.10.10.213 pbx: [h323]}
Jan 1 00:04:31 10.10.10.213 pbx: [h323]ooHandleH2250Message(5)
Jan 1 00:04:31 10.10.10.213 pbx: [h323]Received SETUP message (incoming, HI0000000)
Jan 1 00:04:31 10.10.10.213 pbx: [h323]Warn: Aliases is present (incoming, HI0000000)
Jan 1 00:04:31 10.10.10.213 pbx: [h323]Destination aliases is present(1 items)
Jan 1 00:04:31 10.10.10.213 pbx: [h323]Warn: Aliases is present (incoming, HI0000000)
Jan 1 00:04:31 10.10.10.213 pbx: [h323]Received alias: 217853
Jan 1 00:04:31 10.10.10.213 pbx: [h323]New called party number: 217853
Jan 1 00:04:31 10.10.10.213 pbx: [h323]Call has tunneling active (incoming,HI0000000)
Jan 1 00:04:31 10.10.10.213 pbx: [h323]FastStart enabled for call(incoming, HI0000000)
Jan 1 00:04:31 10.10.10.213 pbx: [h323]FastStart Elements = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] forwardLogicalChannelNumber = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 1
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] forwardLogicalChannelParameters = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] dataType = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] nullData = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] NULL
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] multiplexParameters = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] none = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] NULL
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] reverseLogicalChannelParameters = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] dataType = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] audioData = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] g711Ulaw64k = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 20
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] multiplexParameters = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] h2250LogicalChannelParameters = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] sessionID = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 1
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] mediaChannel = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] unicastAddress = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] iPAddress = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] network = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] '0a0a0ad6'H
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] tsapIdentifier = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 23060
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] mediaControlChannel = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] unicastAddress = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] iPAddress = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] network = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] '0a0a0ad6'H
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] tsapIdentifier = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 23061
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] forwardLogicalChannelNumber = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 101
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] forwardLogicalChannelParameters = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] dataType = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] audioData = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] g711Ulaw64k = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 20
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] }
Jan 1 00:04:31 10.10.10.213 pbx: [h323] multiplexParameters = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] h2250LogicalChannelParameters = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] sessionID = {
Jan 1 00:04:31 10.10.10.213 pbx: [h323] 1
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] mediaControlChannel = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] unicastAddress = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] iPAddress = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] network = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] '0a0a0ad6'H
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] tsapIdentifier = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] 23061
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323]}
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]osEpOnReceivedSetup: call HI0000000: received setup message to 217853
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]our num: 217853 requested: 217853
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]osEpAddMediaInfo: call HI0000000: adding media info
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]osEpAddMediaInfo: call HI0000000: rtp port: 14000
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]osEpAddMediaInfo: call HI0000000: rtcp port: 14001
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G729 (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G729 (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G729ANNEXAWANNEXB (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G729ANNEXAWANNEXB (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G729ANNEXA (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G729ANNEXA (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G729WANNEXB (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G729WANNEXB (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G7231 (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G7231 (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G728 (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G728 (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G711ALAW64K (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G711ALAW64K (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G711ULAW64K (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_G711ULAW64K (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_T38 (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Configured mediainfo for cap OO_T38 (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Building CallProceeding (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Built Call Proceeding(incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [h323]UserInfo encoding - successful
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Q931 Message = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] protocolDiscriminator = 8
Jan 1 00:04:32 10.10.10.213 pbx: [h323] callReference = 12982
Jan 1 00:04:32 10.10.10.213 pbx: [h323] from = destination
Jan 1 00:04:32 10.10.10.213 pbx: [h323] messageType = 2
Jan 1 00:04:32 10.10.10.213 pbx: [h323] Display IE = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] Eltex_H323
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] h323_uu_pdu = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] h323_message_body = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] callProceeding = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] protocolIdentifier = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] 0 0 8 2250 0 4
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] destinationInfo = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] vendor = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] vendor = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] t35CountryCode = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] 7
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] t35Extension = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] 0
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] manufacturerCode = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] 71
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] productId = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] '5441552d312e6970'H
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] versionId = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] '76302e38'H
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] terminal = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] mc = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] FALSE
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] undefinedNode = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] FALSE
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] callIdentifier = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] guid = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] 'c73e0300204abe0b80350002a40234f6'H
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] multipleCalls = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] FALSE
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] maintainConnection = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] FALSE
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] h245Tunneling = {
Jan 1 00:04:32 10.10.10.213 pbx: [h323] TRUE
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323] }
Jan 1 00:04:32 10.10.10.213 pbx: [h323]UUIE decode successful
Jan 1 00:04:32 10.10.10.213 pbx: [h323]}
Jan 1 00:04:32 10.10.10.213 pbx: [h323]Queued H225 messages 1. (incoming, HI0000000)
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]osEpOnIncomingCall: call HI0000000 (00000000) called
Jan 1 00:04:32 10.10.10.213 pbx: [app:dbg]1) port: incoming call from (null):10.10.10.214(voip.10.10.10.214)
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Open Default Channel
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Codec type: 0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Send monitor data: both ACTIVE
Jan 1 00:04:32 10.10.10.213 pbx: [app:dbg]jb_tune: epHnd=0.
Jan 1 00:04:32 10.10.10.213 pbx: [app:dbg]Jitter buffer new params: | adapt_jb_enable = 1 | low_threshold = 1 | nominal_threshold = 4 | high_threshold = 20 | loss_threshold = 0 | fax_threshold = 20 | response_time = 1
Jan 1 00:04:32 10.10.10.213 pbx: [app:dbg]create_new_call
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]port ringing(0)
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]h323_on_free: call 00000000: port alerting
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]call HI0000000 (00000000) ringing back
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]from state 0 to 5
Jan 1 00:04:32 10.10.10.213 pbx: [app:dbg]msec=-2123364384
Jan 1 00:04:32 10.10.10.213 pbx: [app:dbg]dummy handler
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]sqlite3_ports_config_load
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param2 = 217853
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param3 = 0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param4 = 0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param5 = 0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param7 = 0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param8 = 0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param9 =
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param10 = Eltex_User
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param13 = 0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param14 = 400
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param15 = 200
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param19 =
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param21 = -7.0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param22 = 0.0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param24 = 0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param25 = 0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param26 = 0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param27 = 0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]Param28 = 0
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]sqlite3_codecs_config_load
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]codec No1 - enabled = 1
Jan 1 00:04:32 10.10.10.213 pbx: [app:info] priority = 2
Jan 1 00:04:32 10.10.10.213 pbx: [app:info]codec No2 - enabled = 1
Jan 1 00:04:32 10.10.10.213 pbx: [app:info] priority = 0
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]codec No3 - enabled = 1
Jan 1 00:04:33 10.10.10.213 pbx: [app:info] priority = 3
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]codec No4 - enabled = 0
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]codec No5 - enabled = 0
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]codec No6 - enabled = 1
Jan 1 00:04:33 10.10.10.213 pbx: [app:info] priority = 1
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]codec No7 - enabled = 0
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param2 = 101
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param3 = 20
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param4 = 0
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param5 = INFO
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param6 = rfc2833
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param7 = G.711A
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param8 = Off
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param9 = 1
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param10 = 1
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param11 = G.711A
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param15 = Redundancy
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param16 = Adaptive
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param17 = (null)
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param18 = 4
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param19 = (null)
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param20 = (null)
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param21 = (null)
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]sqlite3_range_config_load
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param1 = 22000
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param2 = 23896
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param3 = 20896
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param4 = 20000
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param5 = 21896
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param6 = 21000
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param7 = 0
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param8 = 0
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]sqlite3_h323_config_load
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param1 = 1
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param2 = 0
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param3 = 0
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param4 = 0
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param6 = Eltex_H323
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param7 = 0
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param8 = 300
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param9 = 60
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param10 = 0
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param11 = 0
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param12 = h323password
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param13 = H.245_Alphanumeric
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]Param14 = Speech
Jan 1 00:04:33 10.10.10.213 pbx: [app:info]sqlite3_routes_load - start
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Getting regex expression string
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]parsing regex line : S3, L3 (<:108>XX.@10.10.10.214)
Jan 1 00:04:34 10.10.10.213 pbx: [app:info] global timeouts: S=3, L=3, T=-1
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]end of parsing regex line
Jan 1 00:04:34 10.10.10.213 pbx: [app:dbg]Config loaded.
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]SLIC: 2 DAA: 0
Jan 1 00:04:34 10.10.10.213 pbx: [app:dbg]vpStart in Polling Mode
Jan 1 00:04:34 10.10.10.213 pbx: [app:dbg]===>DSP: iad_vp_init....
Jan 1 00:04:34 10.10.10.213 pbx: [app:dbg]===>DSP: iad_vp_init() completed
Jan 1 00:04:34 10.10.10.213 pbx: [app:dbg] RTP protocol initialized
Jan 1 00:04:34 10.10.10.213 pbx: [app:dbg]Api_iad_telports_init: 1
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]net_initX
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Services found.
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]'VoIP' service.
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]'Internet' service.
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Internet service used.
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]VoIP service used.
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Internet ifname 'br1'.
Jan 1 00:04:34 10.10.10.213 pbx: [app:info] VoIP ifname 'eth0.102'.
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Signaling interface: eth0.102
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Init eth0.102 interface
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Local addr: D50A0A0A
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Closing sqlite3 data base...
Jan 1 00:04:34 10.10.10.213 pbx: [app:dbg]open_led_control
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]LED control device opened.
Jan 1 00:04:34 10.10.10.213 pbx: [app:dbg]net_check - starting
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]pbx_h323_init
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]prefix num 0
Jan 1 00:04:34 10.10.10.213 pbx: [app:dbg]h323_regex_redirect: return 0
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]BEARER: 0
Jan 1 00:04:34 10.10.10.213 pbx: [h323]Error: Failed to set tcp ports- Max port number less than Start port number
Jan 1 00:04:34 10.10.10.213 pbx: [h323]UDP port range initialize - successful
Jan 1 00:04:34 10.10.10.213 pbx: [h323]RTP port range initialize - successful
Jan 1 00:04:34 10.10.10.213 pbx: [h323]Signalling IP address is set to 10.10.10.213
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Tunneling enabled
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Faststart enabled
Jan 1 00:04:34 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G711ULAW64K.
Jan 1 00:04:34 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G7231.
Jan 1 00:04:34 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G711ALAW64K.
Jan 1 00:04:34 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G729.
Jan 1 00:04:34 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G729ANNEXA.
Jan 1 00:04:34 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G729WANNEXB.
Jan 1 00:04:34 10.10.10.213 pbx: [h323]Adding endpoint capability OO_G729ANNEXAWANNEXB.
Jan 1 00:04:34 10.10.10.213 pbx: [h323]add_dtmf_capability: Enter
Jan 1 00:04:34 10.10.10.213 pbx: [h323]Enabled RFC2833 DTMF capability for end-point
Jan 1 00:04:34 10.10.10.213 pbx: [h323]Disabled RFC2833 DTMF capability for end-point
Jan 1 00:04:34 10.10.10.213 pbx: [h323]Dtmf mode set to H.245(alphanumeric) for endpoint
Jan 1 00:04:34 10.10.10.213 pbx: [h323]add_dtmf_capability: dtmf transfer - H245 Alphanumeric
Jan 1 00:04:34 10.10.10.213 pbx: [h323]Creating CMD listener at 10.10.10.213:7575
Jan 1 00:04:34 10.10.10.213 pbx: [h323]CMD listener creation - successful
Jan 1 00:04:34 10.10.10.213 pbx: [h323]H323 listener creation - successful
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Start monitor channels
Jan 1 00:04:34 10.10.10.213 pbx: [h323]H.323 Endpoint Configuration is as follows:
Jan 1 00:04:34 10.10.10.213 pbx: [h323] FastStart - enabled
Jan 1 00:04:34 10.10.10.213 pbx: [h323] H245 Tunneling - enabled
Jan 1 00:04:34 10.10.10.213 pbx: [h323] AutoAnswer - disabled
Jan 1 00:04:34 10.10.10.213 pbx: [h323] Terminal Type - 50
Jan 1 00:04:34 10.10.10.213 pbx: [h323] T35 CountryCode - 7
Jan 1 00:04:34 10.10.10.213 pbx: [h323] T35 Extension - 0
Jan 1 00:04:34 10.10.10.213 pbx: [h323] Manufacturer Code - 71
Jan 1 00:04:34 10.10.10.213 pbx: [h323] ProductID - TAU-1.ip
Jan 1 00:04:34 10.10.10.213 pbx: [h323] VersionID - v0.8
Jan 1 00:04:34 10.10.10.213 pbx: [h323] Local signalling IP address - 10.10.10.213
Jan 1 00:04:34 10.10.10.213 pbx: [h323] H225 ListenPort - 1720
Jan 1 00:04:34 10.10.10.213 pbx: [h323] CallerID - Eltex_H323
Jan 1 00:04:34 10.10.10.213 pbx: [h323] Call Establishment Timeout - 60 seconds
Jan 1 00:04:34 10.10.10.213 pbx: [h323] MasterSlaveDetermination Timeout - 30 seconds
Jan 1 00:04:34 10.10.10.213 pbx: [h323] TerminalCapabilityExchange Timeout - 30 seconds
Jan 1 00:04:34 10.10.10.213 pbx: [h323] LogicalChannel Timeout - 30 seconds
Jan 1 00:04:34 10.10.10.213 pbx: [h323] Session Timeout - 15 seconds
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]H323 client started
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Reset port calls
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]wan 'eth0.102' : MAC A8:F9:4B:03:A5:68
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]cname = '217853@10.10.10.213'
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Modem codec: U-law(default)
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Suppress OFF
Jan 1 00:04:34 10.10.10.213 pbx: [app:dbg]set_gain_settings...
Jan 1 00:04:34 10.10.10.213 pbx: [app:info]Event: 0
Jan 1 00:04:34 10.10.10.213 pbx: [app:dbg]msec=0
Jan 1 00:04:34 10.10.10.213 pbx: [app:dbg]dummy handler
Jan 1 00:04:37 10.10.10.213 pbx: [app:dbg]msec=-2123363584
Jan 1 00:04:37 10.10.10.213 pbx: [app:dbg]dummy handler
Jan 1 00:04:38 10.10.10.213 pbx: [app:dbg]msec=-2123363584
Jan 1 00:04:38 10.10.10.213 pbx: [app:dbg]dummy handler
Jan 1 00:04:39 10.10.10.213 pbx: [app:dbg]msec=-2123363584
Jan 1 00:04:39 10.10.10.213 pbx: [app:info]port 0: offhook
Jan 1 00:04:39 10.10.10.213 pbx: [app:info]from state 0 to 1
Jan 1 00:04:39 10.10.10.213 pbx: [app:info]Open Default Channel
Jan 1 00:04:39 10.10.10.213 pbx: [app:info]Codec type: 0
Jan 1 00:04:39 10.10.10.213 pbx: [app:dbg]jb_tune: epHnd=0.
Jan 1 00:04:39 10.10.10.213 pbx: [app:dbg]Jitter buffer new params: | adapt_jb_enable = 1 | low_threshold = 1 | nominal_threshold = 4 | high_threshold = 20 | loss_threshold = 0 | fax_threshold = 20 | response_time = 1
Jan 1 00:04:39 10.10.10.213 pbx: [app:dbg]create_new_call
Jan 1 00:04:39 10.10.10.213 pbx: [app:info]Search for hotnumbers
Jan 1 00:04:39 10.10.10.213 pbx: [app:info]===> DSP-POLLING: isrPullMsgfrDSP... chnl = 0, evt_type = 2
Jan 1 00:04:39 10.10.10.213 pbx: [app:info]Event: 2
Jan 1 00:04:39 10.10.10.213 pbx: [app:info]Send monitor data: both ACTIVE
Jan 1 00:04:40 10.10.10.213 pbx: [app:info]port 0: onhook(hangup)
Jan 1 00:04:40 10.10.10.213 pbx: [app:info]from state 1 to 0
Jan 1 00:04:40 10.10.10.213 pbx: [app:info]===>DSP: iad_vp_epClose( ch: 0)
Jan 1 00:04:40 10.10.10.213 pbx: [app:info]Destroying call 0(665)0
Jan 1 00:04:40 10.10.10.213 pbx: [app:dbg]current thread locking mutex
Jan 1 00:04:40 10.10.10.213 pbx: [app:dbg]call deleting...........
Jan 1 00:04:40 10.10.10.213 pbx: [app:info]call deleted.
Jan 1 00:04:40 10.10.10.213 pbx: [app:info]Event: 0
Jan 1 00:04:49 10.10.10.213 pbx: [app:info]setGainRXTX
Jan 1 00:04:49 10.10.10.213 pbx: [app:info]Gain/attun values:
Jan 1 00:04:49 10.10.10.213 pbx: [app:info]TX: 0.0 -> 8000000
Jan 1 00:04:49 10.10.10.213 pbx: [app:info]RX: -7.0 -> e4b3b6
Jan 1 00:04:49 10.10.10.213 pbx: [app:info]TX: RAM 544 <-- 8000000
Jan 1 00:04:49 10.10.10.213 pbx: [app:info]RX: RAM 545 <-- e4b3b6
Вернуться в «Оборудование VoIP»
Кто сейчас на конференции
Сейчас этот форум просматривают: нет зарегистрированных пользователей и 3 гостя