Здравствуйте.
После попытки обновиться до новой прошивки устройство выдаёт fatal error и циклично уходит в перезагруз.
Есть аналогичная тема но в ней нет решения ( оно отправлено на почту).
viewtopic.php?f=10&t=6677#p30478
Прошу и мне выслать как восстановить железку, утром её надо в пром ставить.
Ответы сразу по теме:
Файла конфигурации нет, только настроили ( 10 команд, 3 влана и больше ничего) решил обновить, никак не ожидал подобного появления.
До этого версия была возможно даже новее чем залил ( не исключено от 22 ноября), теперь сказать сложно с такой пришел.
s/n pm20000573 есть 2 Вероятно Российский s/n es31000130
К теме прикреплен полный дебаг загрузки который выходит при нажатии ctrl+shift+6
Большая просьба помочь с востановлением работоспособности
О деактивации форума Eltex
Уважаемые коллеги! В связи с потерей актуальности данного ресурса, нами было принято решение о частичной деактивации форума Eltex. Мы отключили функции регистрации и создания новых тем, а также возможность оставлять сообщения. Форум продолжит работу в "режиме чтения", так как за долгие годы работы здесь накопилось много полезной информации и ответов на часто встречающиеся вопросы.
Мы активно развиваем другие каналы коммуникаций, которые позволяют более оперативно и адресно консультировать наших клиентов. Если у вас возникли вопросы по работе оборудования, вы можете обратиться в техническую поддержку Eltex, воспользовавшись формой обращения на сайте компании или оставить заявку в системе Service Desk. По иным вопросам проконсультируют наши менеджеры коммерческого отдела: eltex@eltex-co.ru.
Уважаемые коллеги! В связи с потерей актуальности данного ресурса, нами было принято решение о частичной деактивации форума Eltex. Мы отключили функции регистрации и создания новых тем, а также возможность оставлять сообщения. Форум продолжит работу в "режиме чтения", так как за долгие годы работы здесь накопилось много полезной информации и ответов на часто встречающиеся вопросы.
Мы активно развиваем другие каналы коммуникаций, которые позволяют более оперативно и адресно консультировать наших клиентов. Если у вас возникли вопросы по работе оборудования, вы можете обратиться в техническую поддержку Eltex, воспользовавшись формой обращения на сайте компании или оставить заявку в системе Service Desk. По иным вопросам проконсультируют наши менеджеры коммерческого отдела: eltex@eltex-co.ru.
MES2348B Fatal Error после попытки обновления на mes2300_404.ros
Re: MES2348B Fatal Error после попытки обновления на mes2300_404.ros
Добавить файл не получилось,- сказано что 24Кбайта для вложния слишком много ( достигнут предельный объем)
Поэтому вот ниже прямо в теме форума:
**************************************************
BootROM 1.41
Booting from SPI flash
l
General initialization - Version: 1.0.0
Serdes initialization - Version: 1.0.2
** Link is Gen1, check the EP capability
PEX: pexIdx 0, Link upgraded to Gen2 based on client cpabilities
DDR3 Training Sequence - Ver TIP-1.55.0
DDR3 Training Sequence - Switching XBAR Window to FastPath Window
Updated Physical Mem size is from 0x20000000 to 10000000
DDR3 Training Sequence - Ended Successfully
BootROM: Image checksum verification PASSED
lStarting U-Boot. Press ctrl+shift+6 to enable debug mode.
Debug mode enabled.
_____ _ _
| ____| | |_ _____ __
| _| | | __/ _ \ \/ /
| |___| | || __/> <
|_____|_|\__\___/_/\_\
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__|
** LOADER **
U-Boot 2013.01 (Nov 22 2016 - 09:19:54) Eltex version: 2016_T1.0.eng_drop_v6 4.0.4.7
mvRolInitParams: mvRolXmodemUsed = 0
mvRolInitParams: mvRolImageaddr = 0x1c000000
mvRolInitParams: mvRolLabMode = 1
Board: ALLEYCAT3-Customer-Board-0
SoC: Alleycat3 Rev A1
running 1 CPUs
CPU: Marvell PJ4B (584) v7 (Rev 2) LE
CPU 0
CPU @ 800 [MHz]
L2 @ 200 [MHz]
TClock @ 200 [MHz]
DDR @ 800 [MHz]
DDR 16Bit Width, FastPath Memory Access, DLB Enabled
DDR ECC Disabled
DRAM: 512 MiB
MTL: boardId = 0 0 1 1
NAND: 512 MiB
SF: Detected MX25L12805D with page size 64 KiB, total 16 MiB
PCI-e 0: (bus 1) Root Complex Interface, Detected Link X1, GEN 2.0
FPU initialized to Run Fast Mode.
USB2.0 0: Host Mode
Map: Code: 0x1fea3000:0x1ff86418
BSS: 0x1ffef46c
Stack: 0x1f992ef0
Heap: 0x1f993000:0x1fea3000
U-Boot Environment: 0x00800000:0x00810000 (SPI)
SF: Detected MX25L12805D with page size 64 KiB, total 16 MiB
fpga: board_id is 0xf412
Port0: phyAddr=0x0, Not Marvell PHY id1 ffff id2 ffff
PHY error - shutdown port0
SF: Detected MX25L12805D with page size 64 KiB, total 16 MiB
Erasing SPI flash....Writing to SPI flash.....done
Net:
| port | Interface | PHY address |
|--------|-----------|--------------|
| egiga1 | SGMII | In-Band |
, egiga1
Autoboot in 5 seconds...
Creating 1 MTD partitions on "nand0":
0x000000000000-0x000020000000 : "mtd=0"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size: 262144 bytes (256 KiB)
UBI: logical eraseblock size: 253952 bytes
UBI: smallest flash I/O unit: 4096
UBI: VID header offset: 4096 (aligned 4096)
UBI: data offset: 8192
UBI: attached mtd1 to ubi0
UBI: MTD device name: "mtd=0"
UBI: MTD device size: 512 MiB
UBI: number of good PEBs: 2038
UBI: number of bad PEBs: 10
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 1047
UBI: total number of reserved PEBs: 991
UBI: number of PEBs reserved for bad PEB handling: 20
UBI: max/mean erase counter: 3/2
do_rolImage_cmd: start
SF: Detected MX25L12805D with page size 64 KiB, total 16 MiB
Initializing ROL image ...
do UBI mount rootfs
UBIFS: recovery needed
UBIFS: recovery deferred
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: mounted read-only
UBIFS: file system size: 243032064 bytes (237336 KiB, 231 MiB, 957 LEBs)
UBIFS: journal size: 12189696 bytes (11904 KiB, 11 MiB, 48 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: LZO
UBIFS: reserved for root: 5182151 bytes (5060 KiB)
Doing rolCopyMFG
mfg_flag not found!
Failed loading mfg flag
Find active image and copy to RAM
Loading system/images/active-image ...
Loading file 'system/images/active-image' to addr 0x1c000000 with size 21100837 (0x0141f925)...
Done
Current Uboot version: 4.0.4.7 [0x4000400000007]
Image header: image_version 4.0.4
image_time 2016-08-10_17:18:45
header_size 248
header_version 2
header_crc 0xe27995b1
image_size 21100837
image_magic FR00
image_crc 0x19cd6c2b
minimum_uboot_version 4.0.3 [0x4000300000000]
num_of_files 3
file: uboot size: 1120312 offset: 248
file: uimage size: 19980000 offset: 1120560
file: projectinfo size: 277 offset: 21100560
rolCopyImage: End 1
## Booting kernel from Legacy Image at 08000000 ...
Image Name: Linux-3.4.69
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 19979936 Bytes = 19.1 MiB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Booting Linux on physical CPU 0
Linux version 3.4.69 (babintsev@babintsev-ubuntu) (gcc version 4.6.4 (Linaro GCC branch-4.6.4. Marvell GCC Dev 201310-2126.3d181f66 64K MAXPAGESIZE ALIGN) ) #2 SMP Wed Aug 10 17:18:33 KRAT 2016
CPU: Marvell PJ4Bv7 Processor [562f5842] revision 2 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Machine: Marvell BC2 RD
Using UBoot passing parameters structure
bootconsole [earlycon0] enabled
Memory policy: ECC disabled, Data cache writealloc
BUG: mapping for 0xfc000000 at 0xff400000 out of vmalloc space
SMP: init cpus
PERCPU: Embedded 7 pages/cpu @c176c000 s5952 r8192 d14528 u32768
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 38100
Kernel command line: maxcpus=1 root=/dev/ram0 rw rootfstype=ramfs rdinit=/sbin/init console=ttyO2,115200n8 ubi.mtd=4 mtdparts=spi_flash:4m(uboot1),4m(uboot2),64k(uboot_env),64k(factory);armada-nand:-(rootfs) nfcConfig=4bitecc loglevel=7 earlyprintk=serial,uart0,115200 mv_net_config=4,(00:50:43:11:11:11,0:1:2:3),mtu=1500
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 150MB = 150MB total
Memory: 129352k/129352k available, 24248k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xc9800000 - 0xff000000 ( 856 MB)
lowmem : 0xc0000000 - 0xc9600000 ( 150 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0507000 (5116 kB)
.init : 0xc0507000 - 0xc15ba740 (17102 kB)
.data : 0xc15bc000 - 0xc15f08c0 ( 211 kB)
.bss : 0xc15f08e4 - 0xc1638e98 ( 290 kB)
Hierarchical RCU implementation.
NR_IRQS:178
Initializing MSYS SOC Timer 0
sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798ms
Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
SMP: prepare CPUs (2 cores)
Setting up static identity map for 0x3efc30 - 0x3efc50
Brought up 1 CPUs
SMP: Total of 1 processors activated (795.44 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
Aurora: Working in ARMv7 mode
L0 cache Enabled
Speculative Prefetch Disabled
Aurora L2 Cache Enabled
Support IO coherency.
CPU Interface
-------------
SDRAM_CS0 ....base 000000000, size 512MB
SDRAM_CS1 ....disable
SDRAM_CS2 ....disable
SDRAM_CS3 ....disable
DEVICE_CS0 ....base 0f2200000, size 1MB
DEVICE_CS1 ....no such
DEVICE_CS2 ....no such
DEVICE_CS3 ....no such
PEX0_MEM ....base 090000000, size 128MB
PEX0_IO ....no such
INTER_REGS ....base 0f1000000, size 1MB
DFX_INTER_REGS ....base 0fc000000, size 1MB
SWITCH_REGS ....base 0f8000000, size 64MB
DMA_UART ....no such
SPI_CS0 ....base 0f6000000, size 32MB
SPI_CS1 ....no such
SPI_CS2 ....no such
SPI_CS3 ....no such
SPI_CS4 ....no such
SPI_CS5 ....no such
SPI_CS6 ....no such
SPI_CS7 ....no such
BOOT_ROM_CS ....base 0fff00000, size 1MB
DEV_BOOTCS ....base 0f4000000, size 32MB
USB_REGS ....no such
DRAGONITE ....base 080000000, size 128MB
Marvell MSYS
DB-XC3-24G4XG Board -
Soc: Bobcat2 Rev A1
LE
Detected Tclk 200000000, SysClk 360000000, FabricClk 200000000, PClk 800000000
LSP version: linux-3.4.69-2014_T2.1p9cpss1
mvCtrlModelGet: Error: Failed to obtain Controller Device ID
mvCtrlModelGet: Error: Failed to obtain Controller Device ID
mvCtrlModelGet: Error: Failed to obtain Controller Device ID
mvCtrlModelGet: Error: Failed to obtain Controller Device ID
mvCtrlModelGet: Error: Failed to obtain Controller Device ID
mvCtrlModelGet: Error: Failed to obtain Controller Device ID
mvCtrlModelGet: Error: Failed to obtain Controller Device ID
Warning: port #1 - zero MAC address
Register platform device: mv_neta_port_1
mvCtrlModelGet: Error: Failed to obtain Controller Device ID
mvCtrlModelGet: Error: Failed to obtain Controller Device ID
registered dev#0 asa ehci_marvell
mvCtrlModelGet: Error: Failed to obtain Controller Device ID
Marvell USB EHCI Host controller #0: c90733c0
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource msys_clocksource
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 128 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI-E: Checking physical bus #0 (controller #0): mvCtrlModelGet: Error: Failed to obtain Controller Device ID
mvCtrlModelGet: Error: Failed to obtain Controller Device ID
Enabled - Link UP
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x90000000-0x97ffffff]
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: BAR 4: can't assign mem pref (size 0x40000000)
pci 0000:00:00.0: BAR 2: assigned [mem 0x90000000-0x93ffffff 64bit pref]
pci 0000:00:00.0: BAR 0: assigned [mem 0x94000000-0x940fffff 64bit pref]
SoC: model = 0xf400, revision = 0x4
o 2 Giga ports supported
o SKB recycle supported (Enabled)
o NETA acceleration mode 1
o RX Queue support: 8 Queues * 128 Descriptors
o TX Queue support: 8 Queues * 532 Descriptors
o GSO supported
o GRO supported
o Receive checksum offload supported
o Transmit checksum offload supported
o Driver ERROR statistics enabled
o Driver INFO statistics enabled
port #1: is_sgmii=1, is_rgmii=0, phy_addr=-1
o Loading network interface(s) for port #1: cpu_mask=0x3, tx_csum_limit=9800
o Port 1 is connected to Linux netdevice
o eth0, ifindex = 2, GbE port = 1
giga p=1: mtu=1500, mac=00:00:00:00:00:00 (invalid)
Phy-driver: Initialization started
Phy-driver: register_device() is called.
Phy-driver: registered character device with major number = 217 and minor numbers 0...255
dragonite_xcat dragonite_xcat: Initializing Co-processor...
dragonite_xcat dragonite_xcat: Initializing Co-processor finished
gpiochip_add: registered GPIOs 0 to 32 on device: mv_gpio
NTFS driver 2.1.30 [Flags: R/W].
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 252
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 41) is a 16550A
serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 42) is a 16550A
loop: module loaded
SPI Serial flash detected @ 0xf6000000, 16384KB (256sec x 64KB)
4 cmdlinepart partitions found on MTD device spi_flash
Creating 4 MTD partitions on "spi_flash":
0x000000000000-0x000000400000 : "uboot1"
0x000000400000-0x000000800000 : "uboot2"
0x000000800000-0x000000810000 : "uboot_env"
0x000000810000-0x000000820000 : "factory"
armada-nand armada-nand.0: Initialize HAL based NFC in 8bit mode with DMA Disabled using BCH 4bit ECC
NAND device: Manufacturer ID: 0x98, Chip ID: 0xdc (Toshiba NAND 512MiB 3,3V 8-bit)
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x000018000000
nand_read_bbt: bad block at 0x000018040000
1 cmdlinepart partitions found on MTD device armada-nand
1 cmdlinepart partitions found on MTD device armada-nand
Creating 1 MTD partitions on "armada-nand":
0x000000000000-0x000020000000 : "rootfs"
UBI: attaching mtd4 to ubi0
UBI: physical eraseblock size: 262144 bytes (256 KiB)
UBI: logical eraseblock size: 253952 bytes
UBI: smallest flash I/O unit: 4096
UBI: VID header offset: 4096 (aligned 4096)
UBI: data offset: 8192
UBI: max. sequence number: 2958
UBI: attached mtd4 to ubi0
UBI: MTD device name: "rootfs"
UBI: MTD device size: 512 MiB
UBI: number of good PEBs: 2038
UBI: number of bad PEBs: 10
UBI: number of corrupted PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 1047
UBI: total number of reserved PEBs: 991
UBI: number of PEBs reserved for bad PEB handling: 20
UBI: max/mean erase counter: 3/2
UBI: image sequence number: 0
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
UBI: background thread "ubi_bgt0d" started, PID 328
e1000e: Intel(R) PRO/1000 Network Driver - 1.9.5-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
sky2: driver version 1.30
mvPP_PCI 0000:00:00.0: BAR 2: assigned [mem 0x90000000-0x93ffffff 64bit pref]
mvPP_PCI 0000:00:00.0: BAR 4: assigned [mem 0x94000000-0x941fffff 64bit pref]
mvPP_PCI 0000:00:00.0: BAR 0: assigned [mem 0x94200000-0x942fffff 64bit pref]
------------[ cut here ]------------
WARNING: at fs/sysfs/dir.c:508 sysfs_add_one+0x80/0xa4()
sysfs: cannot create duplicate filename '/devices/platform/dragonite_xcat'
Modules linked in:
Backtrace:
[<c0010e38>] (dump_backtrace+0x0/0x118) from [<c03e5d68>] (dump_stack+0x18/0x20)
r6:c04a93dc r5:000001fc r4:c9031c50 r3:c15d1c48
[<c03e5d50>] (dump_stack+0x0/0x20) from [<c00419bc>] (warn_slowpath_common+0x54/0x70)
[<c0041968>] (warn_slowpath_common+0x0/0x70) from [<c0041a7c>] (warn_slowpath_fmt+0x38/0x40)
r8:c60cf488 r7:c9031c90 r6:c60cf488 r5:ffffffef r4:c60d9000
r3:00000009
[<c0041a44>] (warn_slowpath_fmt+0x0/0x40) from [<c010ce28>] (sysfs_add_one+0x80/0xa4)
r3:c60d9000 r2:c04a940d
[<c010cda8>] (sysfs_add_one+0x0/0xa4) from [<c010d010>] (create_dir+0x68/0xbc)
r7:00000000 r6:00000001 r5:c602c0a0 r4:c9020288
[<c010cfa8>] (create_dir+0x0/0xbc) from [<c010d3ac>] (sysfs_create_dir+0xb8/0xd8)
r8:9419ffff r7:c602c090 r6:c9020288 r5:00000000 r4:c602c0a0
[<c010d2f4>] (sysfs_create_dir+0x0/0xd8) from [<c020aec4>] (kobject_add_internal+0xec/0x1f0)
r6:c15d9888 r5:c602c0a0 r4:c602c0a0
[<c020add8>] (kobject_add_internal+0x0/0x1f0) from [<c020b374>] (kobject_add+0x74/0x94)
r8:9419ffff r7:c602c090 r6:00000000 r5:c15d9888 r4:c602c0a0
[<c020b300>] (kobject_add+0x0/0x94) from [<c0245274>] (device_add+0xe8/0x554)
r3:00000000 r2:00000000
r6:00000000 r5:c602c0a0 r4:c602c098
[<c024518c>] (device_add+0x0/0x554) from [<c0248f7c>] (platform_device_add+0x110/0x170)
[<c0248e6c>] (platform_device_add+0x0/0x170) from [<c0249188>] (platform_device_register+0x28/0x30)
r7:c602c090 r6:c90d5800 r5:c6088c50 r4:c602c090
[<c0249160>] (platform_device_register+0x0/0x30) from [<c051cb20>] (mv_msys_dragonite_init+0x148/0x164)
r4:c6088cd0 r3:00000004
[<c051c9d8>] (mv_msys_dragonite_init+0x0/0x164) from [<c02b1f4c>] (prestera_pci_probe+0x3a8/0x448)
[<c02b1ba4>] (prestera_pci_probe+0x0/0x448) from [<c0227d48>] (pci_device_probe+0x64/0x90)
[<c0227ce4>] (pci_device_probe+0x0/0x90) from [<c024796c>] (driver_probe_device+0xb0/0x1cc)
r8:00000081 r7:c15e2ee8 r6:c15e2ee8 r5:c90d5860 r4:c90d5860
r3:c0227ce4
[<c02478bc>] (driver_probe_device+0x0/0x1cc) from [<c0247af0>] (__driver_attach+0x68/0x90)
r7:00000000 r6:c15e2ee8 r5:c90d5894 r4:c90d5860
[<c0247a88>] (__driver_attach+0x0/0x90) from [<c0246154>] (bus_for_each_dev+0x5c/0x94)
r6:c0247a88 r5:c9031ec0 r4:c15e2ee8 r3:c9073a18
[<c02460f8>] (bus_for_each_dev+0x0/0x94) from [<c02474b4>] (driver_attach+0x20/0x2c)
r7:00000000 r6:c15d8a60 r5:c6088d40 r4:c15e2ee8
[<c0247494>] (driver_attach+0x0/0x2c) from [<c024704c>] (bus_add_driver+0xa4/0x220)
[<c0246fa8>] (bus_add_driver+0x0/0x220) from [<c0247e28>] (driver_register+0xa4/0x134)
[<c0247d84>] (driver_register+0x0/0x134) from [<c02281cc>] (__pci_register_driver+0x48/0xa8)
[<c0228184>] (__pci_register_driver+0x0/0xa8) from [<c051c9c8>] (prestera_pci_init+0x1c/0x2c)
r7:c15f0900 r6:00000000 r5:c051c9ac r4:00000006
[<c051c9ac>] (prestera_pci_init+0x0/0x2c) from [<c0008594>] (do_one_initcall+0x98/0x168)
[<c00084fc>] (do_one_initcall+0x0/0x168) from [<c05079b0>] (kernel_init+0x100/0x1c4)
r9:c0534460 r8:00000081 r7:c15f0900 r6:c052f488 r5:c052f4a8
r4:00000006
[<c05078b0>] (kernel_init+0x0/0x1c4) from [<c0044ee4>] (do_exit+0x0/0x704)
---[ end trace 086287fc9c73926e ]---
------------[ cut here ]------------
WARNING: at lib/kobject.c:198 kobject_add_internal+0x178/0x1f0()
kobject_add_internal failed for dragonite_xcat with -EEXIST, don't try to register things with the same name in the same directory.
Modules linked in:
Backtrace:
[<c0010e38>] (dump_backtrace+0x0/0x118) from [<c03e5d68>] (dump_stack+0x18/0x20)
r6:c04c2135 r5:000000c6 r4:c9031cd0 r3:c15d1c48
[<c03e5d50>] (dump_stack+0x0/0x20) from [<c00419bc>] (warn_slowpath_common+0x54/0x70)
[<c0041968>] (warn_slowpath_common+0x0/0x70) from [<c0041a7c>] (warn_slowpath_fmt+0x38/0x40)
r8:9419ffff r7:c602c090 r6:c15d9888 r5:c602c0a0 r4:ffffffef
r3:00000009
[<c0041a44>] (warn_slowpath_fmt+0x0/0x40) from [<c020af50>] (kobject_add_internal+0x178/0x1f0)
r3:c040a31c r2:c04c21d5
[<c020add8>] (kobject_add_internal+0x0/0x1f0) from [<c020b374>] (kobject_add+0x74/0x94)
r8:9419ffff r7:c602c090 r6:00000000 r5:c15d9888 r4:c602c0a0
[<c020b300>] (kobject_add+0x0/0x94) from [<c0245274>] (device_add+0xe8/0x554)
r3:00000000 r2:00000000
r6:00000000 r5:c602c0a0 r4:c602c098
[<c024518c>] (device_add+0x0/0x554) from [<c0248f7c>] (platform_device_add+0x110/0x170)
[<c0248e6c>] (platform_device_add+0x0/0x170) from [<c0249188>] (platform_device_register+0x28/0x30)
r7:c602c090 r6:c90d5800 r5:c6088c50 r4:c602c090
[<c0249160>] (platform_device_register+0x0/0x30) from [<c051cb20>] (mv_msys_dragonite_init+0x148/0x164)
r4:c6088cd0 r3:00000004
[<c051c9d8>] (mv_msys_dragonite_init+0x0/0x164) from [<c02b1f4c>] (prestera_pci_probe+0x3a8/0x448)
[<c02b1ba4>] (prestera_pci_probe+0x0/0x448) from [<c0227d48>] (pci_device_probe+0x64/0x90)
[<c0227ce4>] (pci_device_probe+0x0/0x90) from [<c024796c>] (driver_probe_device+0xb0/0x1cc)
r8:00000081 r7:c15e2ee8 r6:c15e2ee8 r5:c90d5860 r4:c90d5860
r3:c0227ce4
[<c02478bc>] (driver_probe_device+0x0/0x1cc) from [<c0247af0>] (__driver_attach+0x68/0x90)
r7:00000000 r6:c15e2ee8 r5:c90d5894 r4:c90d5860
[<c0247a88>] (__driver_attach+0x0/0x90) from [<c0246154>] (bus_for_each_dev+0x5c/0x94)
r6:c0247a88 r5:c9031ec0 r4:c15e2ee8 r3:c9073a18
[<c02460f8>] (bus_for_each_dev+0x0/0x94) from [<c02474b4>] (driver_attach+0x20/0x2c)
r7:00000000 r6:c15d8a60 r5:c6088d40 r4:c15e2ee8
[<c0247494>] (driver_attach+0x0/0x2c) from [<c024704c>] (bus_add_driver+0xa4/0x220)
[<c0246fa8>] (bus_add_driver+0x0/0x220) from [<c0247e28>] (driver_register+0xa4/0x134)
[<c0247d84>] (driver_register+0x0/0x134) from [<c02281cc>] (__pci_register_driver+0x48/0xa8)
[<c0228184>] (__pci_register_driver+0x0/0xa8) from [<c051c9c8>] (prestera_pci_init+0x1c/0x2c)
r7:c15f0900 r6:00000000 r5:c051c9ac r4:00000006
[<c051c9ac>] (prestera_pci_init+0x0/0x2c) from [<c0008594>] (do_one_initcall+0x98/0x168)
[<c00084fc>] (do_one_initcall+0x0/0x168) from [<c05079b0>] (kernel_init+0x100/0x1c4)
r9:c0534460 r8:00000081 r7:c15f0900 r6:c052f488 r5:c052f4a8
r4:00000006
[<c05078b0>] (kernel_init+0x0/0x1c4) from [<c0044ee4>] (do_exit+0x0/0x704)
---[ end trace 086287fc9c73926f ]---
mvPP_PCI 0000:00:00.0: mvPP_PCI init completed
PPP generic driver version 2.4.2
NET: Registered protocol family 24
pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver cdc_ncm
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_marvell ehci_marvell.0: Marvell Orion EHCI
ehci_marvell ehci_marvell.0: new USB bus registered, assigned bus number 1
ehci_marvell ehci_marvell.0: irq 45, io base 0xfb050100
ehci_marvell ehci_marvell.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
oprofile: hardware counters not available
oprofile: using timer interrupt.
TCP: cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
8021q: 802.1Q VLAN Support v1.8
VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6
turn off boot console earlycon0
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
BOOTP_fs_create_image_fs: /mnt/flash/system/images/active-image -> mes2300_404.ros
BOOTP_fs_create_image_fs: basename = mes2300_404.ros
BOOTP_fs_create_image_fs: /mnt/flash/system/images/inactive-image -> _image1.bin
BOOTP_fs_create_image_fs: basename = _image1.bin
***************************************************************
*** Running SW Ver. 4.0.4 Date 2016-08-10 Time 17:18:45 ***
***************************************************************
HW version is : 2v3
Base Mac address is : e0:d9:e3:a1:6d:40
Dram size is : 512M bytes
Dram first block size is : 370688K bytes
Dram first PTR is : 0x80000000
Dram second block size is : 4096K bytes
Dram second PTR is : 0x19000000
Flash size is : 512M bytes
10-Aug-2016 17:18:46 %CDB-I-LOADCONFIG: Loading running configuration.
10-Aug-2016 17:18:46 %CDB-I-LOADCONFIG: Loading startup configuration.
------------------------------------
BOX DEBUG INFO DUMP
------------------------------------
UNITS DATABASE
--------------
SEMAPHORES
----------
Semaphore monitoring is disabled
DEBUG LOG
---------
Each log entry is preceded with [time stamp,module,sub-module]
10-Aug-2016 17:18:47 %Box-F-UNQ-FAILED: Function UNQP_get_hw_revision: invalid hw_revision
***** FATAL ERROR *****
Reporting Task: ROOT.
Software Version: 4.0.4[a2fed670] (date 2016-08-10 time 17:18:45)
ros(HOSTG_fatal_error+0x14) [0x239ca8]
ros(OSSYSG_fatal_error+0x150) [0x6e6590]
ros() [0x500890]
ros(BOXG_util_fatal_error+0x2fc) [0xa109a0]
ros(BOXG_init+0xab4) [0xa34600]
ros(SW2C_dist_dmain_box_init+0x8c) [0x8e7af8]
ros(SW2C_dist_main_init+0x274) [0x8e8468]
ros(SW2G_init+0x44) [0x8ea434]
ros(NETG_init+0x70) [0x7aeb3c]
ros() [0x24c1cc]
/lib/libp2linux.so.1(+0x3aa4) [0xb6f45aa4]
/lib/libpthread.so.0(+0x6e64) [0xb6f20e64]
***** END OF FATAL ERROR *****
**************************************************
***************** SYSTEM RESET *****************
**************************************************
Поэтому вот ниже прямо в теме форума:
**************************************************
BootROM 1.41
Booting from SPI flash
l
General initialization - Version: 1.0.0
Serdes initialization - Version: 1.0.2
** Link is Gen1, check the EP capability
PEX: pexIdx 0, Link upgraded to Gen2 based on client cpabilities
DDR3 Training Sequence - Ver TIP-1.55.0
DDR3 Training Sequence - Switching XBAR Window to FastPath Window
Updated Physical Mem size is from 0x20000000 to 10000000
DDR3 Training Sequence - Ended Successfully
BootROM: Image checksum verification PASSED
lStarting U-Boot. Press ctrl+shift+6 to enable debug mode.
Debug mode enabled.
_____ _ _
| ____| | |_ _____ __
| _| | | __/ _ \ \/ /
| |___| | || __/> <
|_____|_|\__\___/_/\_\
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__|
** LOADER **
U-Boot 2013.01 (Nov 22 2016 - 09:19:54) Eltex version: 2016_T1.0.eng_drop_v6 4.0.4.7
mvRolInitParams: mvRolXmodemUsed = 0
mvRolInitParams: mvRolImageaddr = 0x1c000000
mvRolInitParams: mvRolLabMode = 1
Board: ALLEYCAT3-Customer-Board-0
SoC: Alleycat3 Rev A1
running 1 CPUs
CPU: Marvell PJ4B (584) v7 (Rev 2) LE
CPU 0
CPU @ 800 [MHz]
L2 @ 200 [MHz]
TClock @ 200 [MHz]
DDR @ 800 [MHz]
DDR 16Bit Width, FastPath Memory Access, DLB Enabled
DDR ECC Disabled
DRAM: 512 MiB
MTL: boardId = 0 0 1 1
NAND: 512 MiB
SF: Detected MX25L12805D with page size 64 KiB, total 16 MiB
PCI-e 0: (bus 1) Root Complex Interface, Detected Link X1, GEN 2.0
FPU initialized to Run Fast Mode.
USB2.0 0: Host Mode
Map: Code: 0x1fea3000:0x1ff86418
BSS: 0x1ffef46c
Stack: 0x1f992ef0
Heap: 0x1f993000:0x1fea3000
U-Boot Environment: 0x00800000:0x00810000 (SPI)
SF: Detected MX25L12805D with page size 64 KiB, total 16 MiB
fpga: board_id is 0xf412
Port0: phyAddr=0x0, Not Marvell PHY id1 ffff id2 ffff
PHY error - shutdown port0
SF: Detected MX25L12805D with page size 64 KiB, total 16 MiB
Erasing SPI flash....Writing to SPI flash.....done
Net:
| port | Interface | PHY address |
|--------|-----------|--------------|
| egiga1 | SGMII | In-Band |
, egiga1
Autoboot in 5 seconds...
Creating 1 MTD partitions on "nand0":
0x000000000000-0x000020000000 : "mtd=0"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size: 262144 bytes (256 KiB)
UBI: logical eraseblock size: 253952 bytes
UBI: smallest flash I/O unit: 4096
UBI: VID header offset: 4096 (aligned 4096)
UBI: data offset: 8192
UBI: attached mtd1 to ubi0
UBI: MTD device name: "mtd=0"
UBI: MTD device size: 512 MiB
UBI: number of good PEBs: 2038
UBI: number of bad PEBs: 10
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 1047
UBI: total number of reserved PEBs: 991
UBI: number of PEBs reserved for bad PEB handling: 20
UBI: max/mean erase counter: 3/2
do_rolImage_cmd: start
SF: Detected MX25L12805D with page size 64 KiB, total 16 MiB
Initializing ROL image ...
do UBI mount rootfs
UBIFS: recovery needed
UBIFS: recovery deferred
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: mounted read-only
UBIFS: file system size: 243032064 bytes (237336 KiB, 231 MiB, 957 LEBs)
UBIFS: journal size: 12189696 bytes (11904 KiB, 11 MiB, 48 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: LZO
UBIFS: reserved for root: 5182151 bytes (5060 KiB)
Doing rolCopyMFG
mfg_flag not found!
Failed loading mfg flag
Find active image and copy to RAM
Loading system/images/active-image ...
Loading file 'system/images/active-image' to addr 0x1c000000 with size 21100837 (0x0141f925)...
Done
Current Uboot version: 4.0.4.7 [0x4000400000007]
Image header: image_version 4.0.4
image_time 2016-08-10_17:18:45
header_size 248
header_version 2
header_crc 0xe27995b1
image_size 21100837
image_magic FR00
image_crc 0x19cd6c2b
minimum_uboot_version 4.0.3 [0x4000300000000]
num_of_files 3
file: uboot size: 1120312 offset: 248
file: uimage size: 19980000 offset: 1120560
file: projectinfo size: 277 offset: 21100560
rolCopyImage: End 1
## Booting kernel from Legacy Image at 08000000 ...
Image Name: Linux-3.4.69
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 19979936 Bytes = 19.1 MiB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Booting Linux on physical CPU 0
Linux version 3.4.69 (babintsev@babintsev-ubuntu) (gcc version 4.6.4 (Linaro GCC branch-4.6.4. Marvell GCC Dev 201310-2126.3d181f66 64K MAXPAGESIZE ALIGN) ) #2 SMP Wed Aug 10 17:18:33 KRAT 2016
CPU: Marvell PJ4Bv7 Processor [562f5842] revision 2 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Machine: Marvell BC2 RD
Using UBoot passing parameters structure
bootconsole [earlycon0] enabled
Memory policy: ECC disabled, Data cache writealloc
BUG: mapping for 0xfc000000 at 0xff400000 out of vmalloc space
SMP: init cpus
PERCPU: Embedded 7 pages/cpu @c176c000 s5952 r8192 d14528 u32768
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 38100
Kernel command line: maxcpus=1 root=/dev/ram0 rw rootfstype=ramfs rdinit=/sbin/init console=ttyO2,115200n8 ubi.mtd=4 mtdparts=spi_flash:4m(uboot1),4m(uboot2),64k(uboot_env),64k(factory);armada-nand:-(rootfs) nfcConfig=4bitecc loglevel=7 earlyprintk=serial,uart0,115200 mv_net_config=4,(00:50:43:11:11:11,0:1:2:3),mtu=1500
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 150MB = 150MB total
Memory: 129352k/129352k available, 24248k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xc9800000 - 0xff000000 ( 856 MB)
lowmem : 0xc0000000 - 0xc9600000 ( 150 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0507000 (5116 kB)
.init : 0xc0507000 - 0xc15ba740 (17102 kB)
.data : 0xc15bc000 - 0xc15f08c0 ( 211 kB)
.bss : 0xc15f08e4 - 0xc1638e98 ( 290 kB)
Hierarchical RCU implementation.
NR_IRQS:178
Initializing MSYS SOC Timer 0
sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798ms
Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
SMP: prepare CPUs (2 cores)
Setting up static identity map for 0x3efc30 - 0x3efc50
Brought up 1 CPUs
SMP: Total of 1 processors activated (795.44 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
Aurora: Working in ARMv7 mode
L0 cache Enabled
Speculative Prefetch Disabled
Aurora L2 Cache Enabled
Support IO coherency.
CPU Interface
-------------
SDRAM_CS0 ....base 000000000, size 512MB
SDRAM_CS1 ....disable
SDRAM_CS2 ....disable
SDRAM_CS3 ....disable
DEVICE_CS0 ....base 0f2200000, size 1MB
DEVICE_CS1 ....no such
DEVICE_CS2 ....no such
DEVICE_CS3 ....no such
PEX0_MEM ....base 090000000, size 128MB
PEX0_IO ....no such
INTER_REGS ....base 0f1000000, size 1MB
DFX_INTER_REGS ....base 0fc000000, size 1MB
SWITCH_REGS ....base 0f8000000, size 64MB
DMA_UART ....no such
SPI_CS0 ....base 0f6000000, size 32MB
SPI_CS1 ....no such
SPI_CS2 ....no such
SPI_CS3 ....no such
SPI_CS4 ....no such
SPI_CS5 ....no such
SPI_CS6 ....no such
SPI_CS7 ....no such
BOOT_ROM_CS ....base 0fff00000, size 1MB
DEV_BOOTCS ....base 0f4000000, size 32MB
USB_REGS ....no such
DRAGONITE ....base 080000000, size 128MB
Marvell MSYS
DB-XC3-24G4XG Board -
Soc: Bobcat2 Rev A1
LE
Detected Tclk 200000000, SysClk 360000000, FabricClk 200000000, PClk 800000000
LSP version: linux-3.4.69-2014_T2.1p9cpss1
mvCtrlModelGet: Error: Failed to obtain Controller Device ID
mvCtrlModelGet: Error: Failed to obtain Controller Device ID
mvCtrlModelGet: Error: Failed to obtain Controller Device ID
mvCtrlModelGet: Error: Failed to obtain Controller Device ID
mvCtrlModelGet: Error: Failed to obtain Controller Device ID
mvCtrlModelGet: Error: Failed to obtain Controller Device ID
mvCtrlModelGet: Error: Failed to obtain Controller Device ID
Warning: port #1 - zero MAC address
Register platform device: mv_neta_port_1
mvCtrlModelGet: Error: Failed to obtain Controller Device ID
mvCtrlModelGet: Error: Failed to obtain Controller Device ID
registered dev#0 asa ehci_marvell
mvCtrlModelGet: Error: Failed to obtain Controller Device ID
Marvell USB EHCI Host controller #0: c90733c0
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource msys_clocksource
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 128 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI-E: Checking physical bus #0 (controller #0): mvCtrlModelGet: Error: Failed to obtain Controller Device ID
mvCtrlModelGet: Error: Failed to obtain Controller Device ID
Enabled - Link UP
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x90000000-0x97ffffff]
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: BAR 4: can't assign mem pref (size 0x40000000)
pci 0000:00:00.0: BAR 2: assigned [mem 0x90000000-0x93ffffff 64bit pref]
pci 0000:00:00.0: BAR 0: assigned [mem 0x94000000-0x940fffff 64bit pref]
SoC: model = 0xf400, revision = 0x4
o 2 Giga ports supported
o SKB recycle supported (Enabled)
o NETA acceleration mode 1
o RX Queue support: 8 Queues * 128 Descriptors
o TX Queue support: 8 Queues * 532 Descriptors
o GSO supported
o GRO supported
o Receive checksum offload supported
o Transmit checksum offload supported
o Driver ERROR statistics enabled
o Driver INFO statistics enabled
port #1: is_sgmii=1, is_rgmii=0, phy_addr=-1
o Loading network interface(s) for port #1: cpu_mask=0x3, tx_csum_limit=9800
o Port 1 is connected to Linux netdevice
o eth0, ifindex = 2, GbE port = 1
giga p=1: mtu=1500, mac=00:00:00:00:00:00 (invalid)
Phy-driver: Initialization started
Phy-driver: register_device() is called.
Phy-driver: registered character device with major number = 217 and minor numbers 0...255
dragonite_xcat dragonite_xcat: Initializing Co-processor...
dragonite_xcat dragonite_xcat: Initializing Co-processor finished
gpiochip_add: registered GPIOs 0 to 32 on device: mv_gpio
NTFS driver 2.1.30 [Flags: R/W].
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 252
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 41) is a 16550A
serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 42) is a 16550A
loop: module loaded
SPI Serial flash detected @ 0xf6000000, 16384KB (256sec x 64KB)
4 cmdlinepart partitions found on MTD device spi_flash
Creating 4 MTD partitions on "spi_flash":
0x000000000000-0x000000400000 : "uboot1"
0x000000400000-0x000000800000 : "uboot2"
0x000000800000-0x000000810000 : "uboot_env"
0x000000810000-0x000000820000 : "factory"
armada-nand armada-nand.0: Initialize HAL based NFC in 8bit mode with DMA Disabled using BCH 4bit ECC
NAND device: Manufacturer ID: 0x98, Chip ID: 0xdc (Toshiba NAND 512MiB 3,3V 8-bit)
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x000018000000
nand_read_bbt: bad block at 0x000018040000
1 cmdlinepart partitions found on MTD device armada-nand
1 cmdlinepart partitions found on MTD device armada-nand
Creating 1 MTD partitions on "armada-nand":
0x000000000000-0x000020000000 : "rootfs"
UBI: attaching mtd4 to ubi0
UBI: physical eraseblock size: 262144 bytes (256 KiB)
UBI: logical eraseblock size: 253952 bytes
UBI: smallest flash I/O unit: 4096
UBI: VID header offset: 4096 (aligned 4096)
UBI: data offset: 8192
UBI: max. sequence number: 2958
UBI: attached mtd4 to ubi0
UBI: MTD device name: "rootfs"
UBI: MTD device size: 512 MiB
UBI: number of good PEBs: 2038
UBI: number of bad PEBs: 10
UBI: number of corrupted PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 1047
UBI: total number of reserved PEBs: 991
UBI: number of PEBs reserved for bad PEB handling: 20
UBI: max/mean erase counter: 3/2
UBI: image sequence number: 0
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
UBI: background thread "ubi_bgt0d" started, PID 328
e1000e: Intel(R) PRO/1000 Network Driver - 1.9.5-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
sky2: driver version 1.30
mvPP_PCI 0000:00:00.0: BAR 2: assigned [mem 0x90000000-0x93ffffff 64bit pref]
mvPP_PCI 0000:00:00.0: BAR 4: assigned [mem 0x94000000-0x941fffff 64bit pref]
mvPP_PCI 0000:00:00.0: BAR 0: assigned [mem 0x94200000-0x942fffff 64bit pref]
------------[ cut here ]------------
WARNING: at fs/sysfs/dir.c:508 sysfs_add_one+0x80/0xa4()
sysfs: cannot create duplicate filename '/devices/platform/dragonite_xcat'
Modules linked in:
Backtrace:
[<c0010e38>] (dump_backtrace+0x0/0x118) from [<c03e5d68>] (dump_stack+0x18/0x20)
r6:c04a93dc r5:000001fc r4:c9031c50 r3:c15d1c48
[<c03e5d50>] (dump_stack+0x0/0x20) from [<c00419bc>] (warn_slowpath_common+0x54/0x70)
[<c0041968>] (warn_slowpath_common+0x0/0x70) from [<c0041a7c>] (warn_slowpath_fmt+0x38/0x40)
r8:c60cf488 r7:c9031c90 r6:c60cf488 r5:ffffffef r4:c60d9000
r3:00000009
[<c0041a44>] (warn_slowpath_fmt+0x0/0x40) from [<c010ce28>] (sysfs_add_one+0x80/0xa4)
r3:c60d9000 r2:c04a940d
[<c010cda8>] (sysfs_add_one+0x0/0xa4) from [<c010d010>] (create_dir+0x68/0xbc)
r7:00000000 r6:00000001 r5:c602c0a0 r4:c9020288
[<c010cfa8>] (create_dir+0x0/0xbc) from [<c010d3ac>] (sysfs_create_dir+0xb8/0xd8)
r8:9419ffff r7:c602c090 r6:c9020288 r5:00000000 r4:c602c0a0
[<c010d2f4>] (sysfs_create_dir+0x0/0xd8) from [<c020aec4>] (kobject_add_internal+0xec/0x1f0)
r6:c15d9888 r5:c602c0a0 r4:c602c0a0
[<c020add8>] (kobject_add_internal+0x0/0x1f0) from [<c020b374>] (kobject_add+0x74/0x94)
r8:9419ffff r7:c602c090 r6:00000000 r5:c15d9888 r4:c602c0a0
[<c020b300>] (kobject_add+0x0/0x94) from [<c0245274>] (device_add+0xe8/0x554)
r3:00000000 r2:00000000
r6:00000000 r5:c602c0a0 r4:c602c098
[<c024518c>] (device_add+0x0/0x554) from [<c0248f7c>] (platform_device_add+0x110/0x170)
[<c0248e6c>] (platform_device_add+0x0/0x170) from [<c0249188>] (platform_device_register+0x28/0x30)
r7:c602c090 r6:c90d5800 r5:c6088c50 r4:c602c090
[<c0249160>] (platform_device_register+0x0/0x30) from [<c051cb20>] (mv_msys_dragonite_init+0x148/0x164)
r4:c6088cd0 r3:00000004
[<c051c9d8>] (mv_msys_dragonite_init+0x0/0x164) from [<c02b1f4c>] (prestera_pci_probe+0x3a8/0x448)
[<c02b1ba4>] (prestera_pci_probe+0x0/0x448) from [<c0227d48>] (pci_device_probe+0x64/0x90)
[<c0227ce4>] (pci_device_probe+0x0/0x90) from [<c024796c>] (driver_probe_device+0xb0/0x1cc)
r8:00000081 r7:c15e2ee8 r6:c15e2ee8 r5:c90d5860 r4:c90d5860
r3:c0227ce4
[<c02478bc>] (driver_probe_device+0x0/0x1cc) from [<c0247af0>] (__driver_attach+0x68/0x90)
r7:00000000 r6:c15e2ee8 r5:c90d5894 r4:c90d5860
[<c0247a88>] (__driver_attach+0x0/0x90) from [<c0246154>] (bus_for_each_dev+0x5c/0x94)
r6:c0247a88 r5:c9031ec0 r4:c15e2ee8 r3:c9073a18
[<c02460f8>] (bus_for_each_dev+0x0/0x94) from [<c02474b4>] (driver_attach+0x20/0x2c)
r7:00000000 r6:c15d8a60 r5:c6088d40 r4:c15e2ee8
[<c0247494>] (driver_attach+0x0/0x2c) from [<c024704c>] (bus_add_driver+0xa4/0x220)
[<c0246fa8>] (bus_add_driver+0x0/0x220) from [<c0247e28>] (driver_register+0xa4/0x134)
[<c0247d84>] (driver_register+0x0/0x134) from [<c02281cc>] (__pci_register_driver+0x48/0xa8)
[<c0228184>] (__pci_register_driver+0x0/0xa8) from [<c051c9c8>] (prestera_pci_init+0x1c/0x2c)
r7:c15f0900 r6:00000000 r5:c051c9ac r4:00000006
[<c051c9ac>] (prestera_pci_init+0x0/0x2c) from [<c0008594>] (do_one_initcall+0x98/0x168)
[<c00084fc>] (do_one_initcall+0x0/0x168) from [<c05079b0>] (kernel_init+0x100/0x1c4)
r9:c0534460 r8:00000081 r7:c15f0900 r6:c052f488 r5:c052f4a8
r4:00000006
[<c05078b0>] (kernel_init+0x0/0x1c4) from [<c0044ee4>] (do_exit+0x0/0x704)
---[ end trace 086287fc9c73926e ]---
------------[ cut here ]------------
WARNING: at lib/kobject.c:198 kobject_add_internal+0x178/0x1f0()
kobject_add_internal failed for dragonite_xcat with -EEXIST, don't try to register things with the same name in the same directory.
Modules linked in:
Backtrace:
[<c0010e38>] (dump_backtrace+0x0/0x118) from [<c03e5d68>] (dump_stack+0x18/0x20)
r6:c04c2135 r5:000000c6 r4:c9031cd0 r3:c15d1c48
[<c03e5d50>] (dump_stack+0x0/0x20) from [<c00419bc>] (warn_slowpath_common+0x54/0x70)
[<c0041968>] (warn_slowpath_common+0x0/0x70) from [<c0041a7c>] (warn_slowpath_fmt+0x38/0x40)
r8:9419ffff r7:c602c090 r6:c15d9888 r5:c602c0a0 r4:ffffffef
r3:00000009
[<c0041a44>] (warn_slowpath_fmt+0x0/0x40) from [<c020af50>] (kobject_add_internal+0x178/0x1f0)
r3:c040a31c r2:c04c21d5
[<c020add8>] (kobject_add_internal+0x0/0x1f0) from [<c020b374>] (kobject_add+0x74/0x94)
r8:9419ffff r7:c602c090 r6:00000000 r5:c15d9888 r4:c602c0a0
[<c020b300>] (kobject_add+0x0/0x94) from [<c0245274>] (device_add+0xe8/0x554)
r3:00000000 r2:00000000
r6:00000000 r5:c602c0a0 r4:c602c098
[<c024518c>] (device_add+0x0/0x554) from [<c0248f7c>] (platform_device_add+0x110/0x170)
[<c0248e6c>] (platform_device_add+0x0/0x170) from [<c0249188>] (platform_device_register+0x28/0x30)
r7:c602c090 r6:c90d5800 r5:c6088c50 r4:c602c090
[<c0249160>] (platform_device_register+0x0/0x30) from [<c051cb20>] (mv_msys_dragonite_init+0x148/0x164)
r4:c6088cd0 r3:00000004
[<c051c9d8>] (mv_msys_dragonite_init+0x0/0x164) from [<c02b1f4c>] (prestera_pci_probe+0x3a8/0x448)
[<c02b1ba4>] (prestera_pci_probe+0x0/0x448) from [<c0227d48>] (pci_device_probe+0x64/0x90)
[<c0227ce4>] (pci_device_probe+0x0/0x90) from [<c024796c>] (driver_probe_device+0xb0/0x1cc)
r8:00000081 r7:c15e2ee8 r6:c15e2ee8 r5:c90d5860 r4:c90d5860
r3:c0227ce4
[<c02478bc>] (driver_probe_device+0x0/0x1cc) from [<c0247af0>] (__driver_attach+0x68/0x90)
r7:00000000 r6:c15e2ee8 r5:c90d5894 r4:c90d5860
[<c0247a88>] (__driver_attach+0x0/0x90) from [<c0246154>] (bus_for_each_dev+0x5c/0x94)
r6:c0247a88 r5:c9031ec0 r4:c15e2ee8 r3:c9073a18
[<c02460f8>] (bus_for_each_dev+0x0/0x94) from [<c02474b4>] (driver_attach+0x20/0x2c)
r7:00000000 r6:c15d8a60 r5:c6088d40 r4:c15e2ee8
[<c0247494>] (driver_attach+0x0/0x2c) from [<c024704c>] (bus_add_driver+0xa4/0x220)
[<c0246fa8>] (bus_add_driver+0x0/0x220) from [<c0247e28>] (driver_register+0xa4/0x134)
[<c0247d84>] (driver_register+0x0/0x134) from [<c02281cc>] (__pci_register_driver+0x48/0xa8)
[<c0228184>] (__pci_register_driver+0x0/0xa8) from [<c051c9c8>] (prestera_pci_init+0x1c/0x2c)
r7:c15f0900 r6:00000000 r5:c051c9ac r4:00000006
[<c051c9ac>] (prestera_pci_init+0x0/0x2c) from [<c0008594>] (do_one_initcall+0x98/0x168)
[<c00084fc>] (do_one_initcall+0x0/0x168) from [<c05079b0>] (kernel_init+0x100/0x1c4)
r9:c0534460 r8:00000081 r7:c15f0900 r6:c052f488 r5:c052f4a8
r4:00000006
[<c05078b0>] (kernel_init+0x0/0x1c4) from [<c0044ee4>] (do_exit+0x0/0x704)
---[ end trace 086287fc9c73926f ]---
mvPP_PCI 0000:00:00.0: mvPP_PCI init completed
PPP generic driver version 2.4.2
NET: Registered protocol family 24
pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver cdc_ncm
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_marvell ehci_marvell.0: Marvell Orion EHCI
ehci_marvell ehci_marvell.0: new USB bus registered, assigned bus number 1
ehci_marvell ehci_marvell.0: irq 45, io base 0xfb050100
ehci_marvell ehci_marvell.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
oprofile: hardware counters not available
oprofile: using timer interrupt.
TCP: cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
8021q: 802.1Q VLAN Support v1.8
VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6
turn off boot console earlycon0
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
BOOTP_fs_create_image_fs: /mnt/flash/system/images/active-image -> mes2300_404.ros
BOOTP_fs_create_image_fs: basename = mes2300_404.ros
BOOTP_fs_create_image_fs: /mnt/flash/system/images/inactive-image -> _image1.bin
BOOTP_fs_create_image_fs: basename = _image1.bin
***************************************************************
*** Running SW Ver. 4.0.4 Date 2016-08-10 Time 17:18:45 ***
***************************************************************
HW version is : 2v3
Base Mac address is : e0:d9:e3:a1:6d:40
Dram size is : 512M bytes
Dram first block size is : 370688K bytes
Dram first PTR is : 0x80000000
Dram second block size is : 4096K bytes
Dram second PTR is : 0x19000000
Flash size is : 512M bytes
10-Aug-2016 17:18:46 %CDB-I-LOADCONFIG: Loading running configuration.
10-Aug-2016 17:18:46 %CDB-I-LOADCONFIG: Loading startup configuration.
------------------------------------
BOX DEBUG INFO DUMP
------------------------------------
UNITS DATABASE
--------------
SEMAPHORES
----------
Semaphore monitoring is disabled
DEBUG LOG
---------
Each log entry is preceded with [time stamp,module,sub-module]
10-Aug-2016 17:18:47 %Box-F-UNQ-FAILED: Function UNQP_get_hw_revision: invalid hw_revision
***** FATAL ERROR *****
Reporting Task: ROOT.
Software Version: 4.0.4[a2fed670] (date 2016-08-10 time 17:18:45)
ros(HOSTG_fatal_error+0x14) [0x239ca8]
ros(OSSYSG_fatal_error+0x150) [0x6e6590]
ros() [0x500890]
ros(BOXG_util_fatal_error+0x2fc) [0xa109a0]
ros(BOXG_init+0xab4) [0xa34600]
ros(SW2C_dist_dmain_box_init+0x8c) [0x8e7af8]
ros(SW2C_dist_main_init+0x274) [0x8e8468]
ros(SW2G_init+0x44) [0x8ea434]
ros(NETG_init+0x70) [0x7aeb3c]
ros() [0x24c1cc]
/lib/libp2linux.so.1(+0x3aa4) [0xb6f45aa4]
/lib/libpthread.so.0(+0x6e64) [0xb6f20e64]
***** END OF FATAL ERROR *****
**************************************************
***************** SYSTEM RESET *****************
**************************************************
Re: MES2348B Fatal Error после попытки обновления на mes2300_404.ros
Добрый день.
Рекомендации высланы вам на почту.
Рекомендации высланы вам на почту.
Евгений Тур / Элтекс / Сервисный центр ШПД / https://eltex-co.ru/support/
Re: MES2348B Fatal Error после попытки обновления на mes2300_404.ros
Большое спасибо!
Оживил железку по указанным командам.
Оживил железку по указанным командам.
Вернуться в «Коммутаторы и маршрутизаторы Ethernet»
Кто сейчас на конференции
Сейчас этот форум просматривают: нет зарегистрированных пользователей и 8 гостей