Может кто-нибудь объяснить ситуацию с неправильным, на мой взгляд, отображением ifSpeed для 10X интерфейса?
Имеем коммутатор - MES3124F 28-port Fiber 1G/10G Managed Switch
Версия - SW version 2.5.47[4a975dcb]
У него есть интерфейс - tengigabitethernet 1/0/2, у того в свою очередь есть snmp индекс - 106:
Код: Выделить всё
tengigabitethernet 1/0/2 is up (connected)
Interface index is 106
Hardware is tengigabitethernet, MAC address is _
Description: _
Interface MTU is 10218
Full-duplex, 10000Mbps, link type is 10000Mbps full-duplex, media type is 10G-Fiber
Link is up for 57 days, 23 hours, 15 minutes and 56 seconds
Flow control is off, MDIX mode is off
Но в Заббиксе, а собственно и по snmpget отдает значение - IF-MIB::ifSpeed.106 = Gauge32: 4294967295