Элтекс

Всем добрый день !
После обновления софта получаю вот такой набор строк после коммита
============================================================================
volcano# commit
12514: 2019-11-18T13:21:06+03:00 %SERVICE_MGR-E-UNREGPROCESS: service 'ESRFS' was stopped, pid = 5249
12515: 2019-11-18T13:21:06+03:00 %SERVICE_MGR-E-RESTARTPROCESS: service 'ESRFS' was restarted
12516: 2019-11-18T13:21:06+03:00 %SERVICE_MGR-E-UNREGPROCESS: service 'ESRFS' stopped, pid = 5249, exit status (0), signal (Unknown signal 0)
12519: 2019-11-18T13:21:07+03:00 %SERVICE_MGR-E-UNREGPROCESS: service 'ESRFS' stopped, pid = 5249, exit status (0), signal (Unknown signal 0)
12520: 2019-11-18T13:21:07+03:00 %SERVICE_MGR-E-UNREGPROCESS: <mgr_unregister_process> service 'LLDPD' already stopped
12521: 2019-11-18T13:21:07+03:00 %SERVICE_MGR-E-UNREGPROCESS: service 'dns-recursor' was stopped, pid = 2370
12522: 2019-11-18T13:21:07+03:00 %SERVICE_MGR-I-REGPROCESS: service 'dns-recursor' was started, pid = 12220
12523: 2019-11-18T13:21:07+03:00 %SERVICE_MGR-E-RESTARTPROCESS: service 'dns-recursor' was restarted
12526: 2019-11-18T13:21:08+03:00 %SERVICE_MGR-E-UNREGPROCESS: service 'ESRFS' stopped, pid = 5249, exit status (0), signal (Unknown signal 0)
Configuration has been successfully applied and saved to flash. Commit timer started, changes will be reverted in 600 seconds.
12527: 2019-11-18T13:21:09+03:00 %CLI-I-CRIT: user admin from ssh 192.168.149.50 input: commit
volcano# 12530: 2019-11-18T13:21:09+03:00 %SERVICE_MGR-E-UNREGPROCESS: service 'ESRFS' stopped, pid = 5249, exit status (0), signal (Unknown signal 0)
12534: 2019-11-18T13:21:10+03:00 %SERVICE_MGR-E-UNREGPROCESS: service 'ESRFS' stopped, pid = 5249, exit status (0), signal (Unknown signal 0)
12535: 2019-11-18T13:21:11+03:00 %SERVICE_MGR-E-UNREGPROCESS: service 'ESRFS' stopped, pid = 5249, exit status (0), signal (Unknown signal 0)
12536: 2019-11-18T13:21:12+03:00 %SERVICE_MGR-E-UNREGPROCESS: service 'ESRFS' stopped, pid = 5249, exit status (0), signal (Unknown signal 0)
12537: 2019-11-18T13:21:13+03:00 %SERVICE_MGR-E-UNREGPROCESS: service 'ESRFS' stopped, pid = 5249, exit status (0), signal (Unknown signal 0)
12539: 2019-11-18T13:21:14+03:00 %SERVICE_MGR-E-UNREGPROCESS: service 'ESRFS' stopped, pid = 5249, exit status (0), signal (Unknown signal 0)
12540: 2019-11-18T13:21:15+03:00 %SERVICE_MGR-E-UNREGPROCESS: service 'ESRFS' stopped, pid = 5249, exit status (0), signal (Unknown signal 0)
12541: 2019-11-18T13:21:16+03:00 %SERVICE_MGR-E-UNREGPROCESS: service 'ESRFS' stopped, pid = 5249, exit status (0), signal (Unknown signal 0)
12542: 2019-11-18T13:21:17+03:00 %SERVICE_MGR-I-REGPROCESS: service 'ESRFS' was started, pid = 12271

volcano#
=============================================================================================
volcano# sh version
Boot version:
1.6.2.1 (date 18/06/2019 time 14:28:33)
SW version:
1.8.1 build 4[ca384e8f] (date 11/09/2019 time 10:29:24)
HW version:
1v3

volcano# sh system
System type: Eltex ESR-1200 Service Router
System name: volcano
Software version: 1.8.1 build 4[ca384e8f] (date 11/09/2019 time 10:29:24)
Hardware version: 1v3
System uptime: 1 day, 21 hours, 29 minutes and 22 seconds
================================================================================================

Что бы это значила эта борода и как с ней бороться ???????

Добрый день! Нет, это не борода и бороться с ней вовсе не нужно. Этого новая функция logging service start-stop. Информирует о включении и выключении сервисов. Очень полезна при диагностики каких либо проблем. Если сильно напрягает, то можете ее отключить no logging service start-stop.

Спасибо !!! Нашел .