Настройка NTP-RG-1402G-W:rev.C
Добавлено: 10 дек 2015 20:31
Доброе время суток!
Что задавать в URL = ""?
Код: Выделить всё
acs-ont-sn='ELTX1A00CE1D')reconfigure
RROR: Cann't send command: ONT url not defined!
acs-ont-sn='ELTX1A00CE1D')show config
nformation about ONT 'ELTX1A00CE1D':
ID = 2
Serial = "ELTX1A00CE1D"
Profile = "NTP-RG-1402G-W:rev.C: NTP-RG-1402G-W:rev.C"
Hardware name = "NTP-RG-1402G-W:rev.C"
Firmware = ""
URL = ""
Config name = ""
Sfw upd time = "2015-12-10 16:23:07"
Sfw upd res = ""
Cfg upd res = ""
Last contact = "1901-12-13 23:45:52"
Cfg upd time = "1901-12-13 23:45:52"
Hardware = ""
Cfg version = ""
Username = ""
Password = ""
Authtype = 0
Customer ID = ""
Con req user = "admin"
Con req pass = "admin"
Cfg force = 0
Subscriber = ""Что задавать в URL = ""?
Код: Выделить всё
LTP-8X> show system information
System information:
CPU load average (1m, 5m, 15m): 0.07 0.31 0.21
Free RAM/Total RAM (Mbytes): 363/496
Temperature (sensor1/sensor2): 27C 40C
Fan state (fan1/fan2): on(8760rpm) on(8940rpm)
TYPE: LTP-8X:rev.B
HW_revision: 2v2
SN: GP28000322
MAC: A8:F9:4B:XX:XX:XX