Код: Выделить всё
#show fiber-ports optical-transceiver det interface gi 0/22
Port Temp Voltage Current Output Input LOS Transceiver
[C] [V] [mA] Power Power Type
[mW / dBm] [mW / dBm]
----------- ------ ------- ------- ------------- ------------- --- -------------
gi1/0/22 13120 3.32 19.53 0.25 / -5.86 0.16 / -7.93 No Fiber
Temp - Internally measured transceiver temperature
Voltage - Internally measured supply voltage
Current - Measured TX bias current
Output Power - Measured TX output power in milliWatts/dBm
Input Power - Measured RX received power in milliWatts/dBm
LOS - Loss of signal
N/A - Not Available, N/S - Not Supported, W - Warning, E - Error
Transceiver information:
Vendor name: NEOPHOTONICS
Serial number: A0212682349
Connector type: LC
Type: SFP/SFP+
Compliance code: BaseBX10
Laser wavelength: 1490 nm
Transfer distance: 10000 m
Diagnostic: supported
#show version
SW version 2.5.40 ( date 20-Jul-2015 time 14:40:04 )
Boot version 0.0.1.2 ( date 12-Dec-2012 time 19:10:41 )
HW version 02.06
CPLD version 03
в результате в логах
Код: Выделить всё
20-Jul-2015 19:08:16 :%Fiber-I-SFP-THRESHOLD: gi1/0/22 SFP Output Power high alarm
20-Jul-2015 19:08:16 :%Fiber-I-SFP-THRESHOLD: gi1/0/22 SFP Temperature high alarm
Это SFP модуль такой "кривой" ? или коммутатор некорректно распознает данные из модуля?