TAU-8.IP

[GroznovEgor]

Всем здравствуйте, возникла проблема с голосовыми шлюзами этой модели.
Входящие вызовы работают, а вот при попытке совершить исходящий звонок - сразу отбой. При этом водящие работают нормально. Прикладываю логи. Версия по - последня 2.3.0.22


[spoiler]Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.730[app:dbg]Chan 7:
current state is CREATED
Aug 16 21:39:08 TAU-8 user.err syslog: 21:39:08.730[app:ERR]chan 7: no
generated tones!
Aug 16 21:39:08 TAU-8 user.debug syslog:
21:39:08.730[app:dbg]vapi_chan.c:1554: conn 7 peek cmd 'no event' from
queue
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.730[app:dbg]Port 7:
check vapi queue ('free') at __cmd_engine:342
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.730[app:dbg]Port 7:
check vapi queue ('free') at vapi_next_ops:2614
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.730[app:dbg]SLIC 7: reset
Aug 16 21:39:08 TAU-8 user.debug syslog:
21:39:08.730[app:dbg]dump_port_calls() SLIC 7:
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.730[app:dbg]Q:NONE
Aug 16 21:39:08 TAU-8 user.debug syslog:
21:39:08.730[app:dbg]H:((nil),0x00000000,(nil),0)
W:((nil),0x00000000,(nil)) N:((nil),0x00000000,(nil))
H2:((nil),0x00000000,(nil))
Aug 16 21:39:08 TAU-8 user.debug syslog:
21:39:08.730[app:dbg]free_final_mx: final_mx was NULL for SLIC 7
Aug 16 21:39:08 TAU-8 user.debug syslog:
21:39:08.730[app:dbg]CMD_DESTROY_CONN: port = 7
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.730[app:dbg]Port 7:
check vapi queue ('free') at vapi_destroy_chan:906
Aug 16 21:39:08 TAU-8 user.debug syslog:
21:39:08.730[app:dbg]Destroying connection 7...
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.730[app:dbg]Chan 7:
current state is CREATED
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.730[app:dbg]Port 7:
set vapi queue MSP to 'busy' with 'destroy' at vapi_destroy_chan:932
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.730[app:dbg]VQ Conn
7 = MSP : 'destroy' =
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.730[app:dbg]Chan 7:
CREATED -> DESTROYING
Aug 16 21:39:08 TAU-8 user.debug syslog:
21:39:08.730[app:dbg]CMD_DESTROY_IPONLY_CONN: port = 7
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.730[app:dbg]Port 7:
check vapi queue ('busy''destroy') at vapi_destroy_chan:906
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.730[app:dbg]Clear
vapi queue of Port 7/chan 15
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.730[app:dbg]Port 7
put cmd 'destroy',cur 'destroy' to queue at (vapi_destroy_chan:913)
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.730[app:dbg]VQ Conn
15 = MSP : 'destroy' =
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.730[app:dbg]VQ Conn
15 + 00 : 'destroy' (hold) + <-get_ptr
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.730[app:dbg]Port 7:
user port 1, old state hangup, new state
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.730[app:dbg]Set port
7 led to state 'LED_OFF'
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.730[app:dbg]pbx
-[msg_fxs_state]-> group
Aug 16 21:39:08 TAU-8 user.debug syslog:
21:39:08.730[app:dbg]dump_port_calls() SLIC 7:
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.730[app:dbg]Q:NONE
Aug 16 21:39:08 TAU-8 user.debug syslog:
21:39:08.730[app:dbg]H:((nil),0x00000000,(nil),0)
W:((nil),0x00000000,(nil)) N:((nil),0x00000000,(nil))
H2:((nil),0x00000000,(nil))
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.730[app:dbg]Set port
7 led to state 'LED_OFF'
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.730[app:dbg]Delete
all RX-TX medias from SLIC 7
Aug 16 21:39:08 TAU-8 user.debug syslog:
21:39:08.730[app:dbg]vapi_cb_req: 7 0 result 0x00000000 requid
0x0000014c
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.730[app:dbg]ITC:
[msg_fxs_state] -> group
Aug 16 21:39:08 TAU-8 user.debug syslog:
21:39:08.730[app:dbg]-----[GM] self_fxs_state()
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.730[app:dbg]Port 7:
new state is hangup
Aug 16 21:39:08 TAU-8 user.debug syslog:
21:39:08.730[app:dbg]vapi_proc_event: VAPI_CB
Aug 16 21:39:08 TAU-8 user.debug syslog:
21:39:08.730[app:dbg]vapi_cb_chan: chan 7 reqest_id 0x0000014c result
0x00000000
Aug 16 21:39:08 TAU-8 user.debug syslog:
21:39:08.730[app:dbg]vapi_cb_req: 7 0 result 0x00000000 requid
0x00000103
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.740[app:dbg]Delete
all RX-TX medias from SLIC 15
Aug 16 21:39:08 TAU-8 user.debug syslog:
21:39:08.740[app:dbg]vapi_proc_event: VAPI_CB
Aug 16 21:39:08 TAU-8 user.debug syslog:
21:39:08.740[app:dbg]vapi_cb_chan: chan 7 reqest_id 0x00000103 result
0x00000000
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.740[app:dbg]Conn 7 destroyed
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.740[app:dbg]Chan 7:
DESTROYING -> INITIAL
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.740[app:dbg]Port 7:
check vapi queue ('busy''destroy') at vapi_next_ops:2614
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.740[app:dbg]Port 7
get cmd 'destroy' from queue at (vapi_next_ops:2633)
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.750[app:dbg]Port 7:
check vapi queue ('free') at vapi_destroy_chan:906
Aug 16 21:39:08 TAU-8 user.debug syslog:
21:39:08.750[app:dbg]Destroying connection 15...
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.750[app:dbg]Chan 15:
current state is INITIAL
Aug 16 21:39:08 TAU-8 user.err syslog:
21:39:08.750[app:ERR]vapi_destroy_chan() chan 15: current state
initial: duplicate destroying connection!
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.750[app:dbg]Port 7:
check vapi queue ('free') at vapi_next_ops:2776
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.750[app:dbg]Port 7:
check vapi queue ('free') at vapi_next_ops:2614
Aug 16 21:39:08 TAU-8 user.debug syslog: 21:39:08.750[app:dbg]Delete
all RX-TX medias from SLIC 7
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]slic7. Event 2.
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]slic 7.
Off-hook event
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]Set port
7 led to state 'LED_ON'
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]HIO:
offhook TDM port '7' port enabled 1
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]HIO:
offhook TDM port '7' direction unknown -> outgoing
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]SLIC 7
(subs163_1001): offhook state: hangup
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]regex ID
7: dial reset
Aug 16 21:39:09 TAU-8 user.info syslog: 21:39:09.200[app:info]SLIC 7:
from state 'hangup' to state 'hangdown'
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.200[app:dbg]CMD_CREATE_CONN: port = 7
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]Port 7:
check vapi queue ('free') at vapi_create_chan:710
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]Chan 7:
current state is INITIAL
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]Port 7:
set vapi queue MSP to 'busy' with 'create' at vapi_create_chan:736
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]VQ Conn
7 = MSP : 'create' =
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]Creating
connection 7....
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]Chan 7:
INITIAL -> CREATING
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]Created
succefuly 7....
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.200[app:dbg]CMD_CREATE_CONN: port = 7
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]Port 7:
check vapi queue ('busy''create') at vapi_create_chan:710
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]Port 7
put cmd 'create',cur 'create' to queue at (vapi_create_chan:716)
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]VQ Conn
7 = MSP : 'create' =
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]VQ Conn
7 + 01 : 'create' + <-get_ptr
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.200[app:dbg]port_start_tone(7 21 0 0)
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.200[app:dbg]CMD_START_TONE: port = 7
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]Port 7:
check vapi queue ('busy''create') at vapi_start_tone_chan:1427
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]Port 7
put cmd 'start_tone',cur 'create' to queue at
(vapi_start_tone_chan:1437)
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]VQ Conn
7 = MSP : 'create' =
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]VQ Conn
7 + 01 : 'create' + <-get_ptr
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]VQ Conn
7 + 02 : 'start_tone' +
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]Port 7:
user port 1, old state hangdown, new state
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]Set port
7 led to state 'LED_ON'
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]pbx
-[msg_fxs_state]-> group
Aug 16 21:39:09 TAU-8 user.info syslog: 21:39:09.200[app:info]Looking
for hot numbers
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.200[app:dbg]dump_port_calls() SLIC 7:
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]Q:NONE
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.200[app:dbg]H:((nil),0x00000000,(nil),0)
W:((nil),0x00000000,(nil)) N:((nil),0x00000000,(nil))
H2:((nil),0x00000000,(nil))
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]ITC:
[msg_fxs_state] -> group
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.200[app:dbg]-----[GM] self_fxs_state()
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]Port 7:
new state is hangdown
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.200[app:dbg]vapi_cb_req: 7 0 result 0x00000000 requid
0x00000050
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.200[app:dbg]vapi_proc_event: VAPI_CB
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.200[app:dbg]vapi_cb_chan: chan 7 reqest_id 0x00000050 result
0x00000000
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.200[app:dbg]vapi_cb_req: 7 0 result 0x00000000 requid
0x00000007
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.200[app:dbg]vapi_proc_event: VAPI_CB
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.200[app:dbg]vapi_cb_chan: chan 7 reqest_id 0x00000007 result
0x00000000
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.200[app:dbg]vapi:
Conn 7. Set In-Activ state
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.210[app:dbg]vapi_cb_req: 7 0 result 0x00000000 requid
0x00000051
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.210[app:dbg]vapi_proc_event: VAPI_CB
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.210[app:dbg]vapi_cb_chan: chan 7 reqest_id 0x00000051 result
0x00000000
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.210[app:dbg]vapi:
Conn 7 - SET AGC
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.210[app:dbg]vapi_cb_req: 7 0 result 0x00000000 requid
0x00000000
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.220[app:dbg]vapi_proc_event: VAPI_CB
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.220[app:dbg]vapi_cb_chan: chan 7 reqest_id 0x00000000 result
0x00000000
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.220[app:dbg]vapi:
Conn 7 - << CREATED >>
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.220[app:dbg]vapi:
Conn 7 - fix DTMF detector
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.220[app:dbg]vapi_cb_req: 7 0 result 0x00000000 requid
0x0000004a
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.220[app:dbg]vapi_proc_event: VAPI_CB
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.220[app:dbg]vapi_cb_chan: chan 7 reqest_id 0x0000004a result
0x00000000
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.220[app:dbg]vapi:
Conn 7 - fix CNG generator
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.230[app:dbg]vapi_cb_req: 7 0 result 0x00000000 requid
0x0000004d
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.230[app:dbg]vapi_proc_event: VAPI_CB
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.230[app:dbg]vapi_cb_chan: chan 7 reqest_id 0x0000004d result
0x00000000
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.230[app:dbg]vapi:
Conn 7 - caller id Set param
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.230[app:dbg]vapi:
chan '7' set param Caller ID
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.240[app:dbg]vapi_cb_req: 7 0 result 0x00000000 requid
0x0000000c
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.240[app:dbg]vapi_proc_event: VAPI_CB
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.240[app:dbg]vapi_cb_chan: chan 7 reqest_id 0x0000000c result
0x00000000
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.240[app:dbg]vapi:
Conn 7 - enable ind ptime and pt
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.250[app:dbg]vapi_cb_req: 7 0 result 0x00000000 requid
0x00000052
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.250[app:dbg]vapi_proc_event: VAPI_CB
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.250[app:dbg]vapi_cb_chan: chan 7 reqest_id 0x00000052 result
0x00000000
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.250[app:dbg]vapi:
Conn 7. Set Active state
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.270[app:dbg]vapi_cb_req: 7 0 result 0x00000000 requid
0x0000004b
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.270[app:dbg]vapi_proc_event: VAPI_CB
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.270[app:dbg]vapi_cb_chan: chan 7 reqest_id 0x0000004b result
0x00000000
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.270[app:dbg]Chan 7:
CREATING -> CREATED
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.270[app:dbg]Port 7:
check vapi queue ('busy''create') at vapi_next_ops:2614
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.270[app:dbg]Port 7
get cmd 'create' from queue at (vapi_next_ops:2633)
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.270[app:dbg]VQ Conn
7 + 02 : 'start_tone' + <-get_ptr
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.270[app:dbg]Port 7:
check vapi queue ('free') at vapi_create_chan:710
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.270[app:dbg]Chan 7:
current state is CREATED
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.270[app:dbg]chan 7:
no need to create - already exists
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.270[app:dbg]Port 7:
check vapi queue ('free') at vapi_next_ops:2776
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.270[app:dbg]Port 7:
check vapi queue ('free') at vapi_next_ops:2614
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.270[app:dbg]Port 7
get cmd 'start_tone' from queue at (vapi_next_ops:2633)
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.270[app:dbg]Port 7:
check vapi queue ('free') at vapi_start_tone_chan:1427
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.270[app:dbg]Chan 7:
current state is CREATED
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.270[app:dbg]Port 7:
set vapi queue MSP to 'busy' with 'start_tone' at
vapi_start_tone_chan:1464
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.270[app:dbg]VQ Conn
7 = MSP : 'start_tone' =
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.270[app:dbg]Conn 7,
tone config: tone_high: 425Hz, tone_low: 0Hz, tone_t_on1: 1000ms,
tone_t_off1: 0ms, tone_t_on2: 0ms, tone_t_off2: 0ms
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.280[app:dbg]chan 7
start tone, id=21, direction=TDM
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.280[app:dbg]vapi_cb_req: 7 0 result 0x00000000 requid
0x00000923
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.280[app:dbg]vapi_proc_event: VAPI_CB
Aug 16 21:39:09 TAU-8 user.debug syslog:
21:39:09.280[app:dbg]vapi_cb_chan: chan 7 reqest_id 0x00000923 result
0x00000000
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.280[app:dbg]Conn 7:
Start tone - Successfull
Aug 16 21:39:09 TAU-8 user.debug syslog: 21:39:09.280[app:dbg]Port 7:
check vapi queue ('busy''start_tone') at vapi_next_ops:2614
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.170[app:dbg]slic7. Event 8.
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.170[app:dbg]slic 7.
Pre-On-hook event
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.170[app:dbg]HIO:
preonhook TDM port '7', port enabled 1
Aug 16 21:39:11 TAU-8 user.debug syslog:
21:39:11.170[app:dbg]CMD_STOP_TONE: port = 7
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.170[app:dbg]Port 7:
check vapi queue ('free') at vapi_stop_tone_chan:1518
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.170[app:dbg]Chan 7:
current state is CREATED
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.170[app:dbg]Port 7:
set vapi queue MSP to 'busy' with 'stop_tone' at
vapi_stop_tone_chan:1564
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.170[app:dbg]VQ Conn
7 = MSP : 'stop_tone' =
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.170[app:dbg]chan 7 stop tone
Aug 16 21:39:11 TAU-8 user.debug syslog:
21:39:11.170[app:dbg]vapi_cb_req: 7 0 result 0x00000000 requid
0x00000924
Aug 16 21:39:11 TAU-8 user.debug syslog:
21:39:11.170[app:dbg]vapi_proc_event: VAPI_CB
Aug 16 21:39:11 TAU-8 user.debug syslog:
21:39:11.170[app:dbg]vapi_cb_chan: chan 7 reqest_id 0x00000924 result
0x00000000
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.170[app:dbg]Conn 7:
Stop tone - Successfull
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.170[app:dbg]Port 7:
check vapi queue ('busy''stop_tone') at vapi_next_ops:2614
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.190[app:dbg]vapi:
generic event, code 2 <Tone Generation completed>, conn 7
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.520[app:dbg]slic7. Event 4.
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.520[app:dbg]hio:
port 7: digit 2 (code 0x2), pulse
Aug 16 21:39:11 TAU-8 user.info syslog: 21:39:11.520[app:info]SLIC 7:
from state 'hangdown' to state 'dial'
Aug 16 21:39:11 TAU-8 user.debug syslog:
21:39:11.520[app:dbg]CMD_STOP_TONE: port = 7
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.520[app:dbg]Port 7:
check vapi queue ('free') at vapi_stop_tone_chan:1518
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.520[app:dbg]Chan 7:
current state is CREATED
Aug 16 21:39:11 TAU-8 user.err syslog: 21:39:11.520[app:ERR]chan 7: no
generated tones!
Aug 16 21:39:11 TAU-8 user.debug syslog:
21:39:11.520[app:dbg]vapi_chan.c:1554: conn 7 peek cmd 'no event' from
queue
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.520[app:dbg]Port 7:
check vapi queue ('free') at __cmd_engine:342
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.520[app:dbg]Port 7:
check vapi queue ('free') at vapi_next_ops:2614
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.520[app:dbg]Port 7:
user port 1, old state dial, new state
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.520[app:dbg]Set port
7 led to state 'LED_ON'
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.520[app:dbg]pbx
-[msg_fxs_state]-> group
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.520[app:dbg]ITC:
[msg_fxs_state] -> group
Aug 16 21:39:11 TAU-8 user.debug syslog:
21:39:11.520[app:dbg]-----[GM] self_fxs_state()
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.520[app:dbg]Port 7:
new state is dial
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.520[app:dbg]first !*
and !# - can`t be dvo
Aug 16 21:39:11 TAU-8 user.info syslog: 21:39:11.520[app:info]SLIC 7: digit 2
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.520[app:dbg]end of
items - test dial ended
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.520[app:dbg]07: []
Aug 16 21:39:11 TAU-8 user.debug syslog:
21:39:11.520[app:dbg]port_process_digit() regex route (nil), final 1,
dt 0
Aug 16 21:39:11 TAU-8 user.err syslog: 21:39:11.520[app:ERR]SLIC 7: no
route for <2>, no outbound
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.520[app:dbg]port 7:
process final route
Aug 16 21:39:11 TAU-8 user.debug syslog:
21:39:11.520[app:dbg]regex_timers_dial_final() no routes found
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.530[app:dbg]SLIC 7:
final action
Aug 16 21:39:11 TAU-8 user.err syslog: 21:39:11.530[app:ERR]SLIC 7: no
routes found / L timers expired
Aug 16 21:39:11 TAU-8 user.info syslog: 21:39:11.530[app:info]SLIC 7:
from state 'dial' to state 'busy'
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.530[app:dbg]SLIC 7: reset
Aug 16 21:39:11 TAU-8 user.debug syslog:
21:39:11.530[app:dbg]dump_port_calls() SLIC 7:
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.530[app:dbg]Q:NONE
Aug 16 21:39:11 TAU-8 user.debug syslog:
21:39:11.530[app:dbg]H:((nil),0x00000000,(nil),0)
W:((nil),0x00000000,(nil)) N:((nil),0x00000000,(nil))
H2:((nil),0x00000000,(nil))
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.530[app:dbg]Delete
all RX-TX medias from SLIC 7
Aug 16 21:39:11 TAU-8 user.debug syslog:
21:39:11.530[app:dbg]free_final_mx: final_mx was NULL for SLIC 7
Aug 16 21:39:11 TAU-8 user.debug syslog:
21:39:11.530[app:dbg]port_start_tone(7 22 0 0)
Aug 16 21:39:11 TAU-8 user.debug syslog:
21:39:11.530[app:dbg]CMD_START_TONE: port = 7
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.530[app:dbg]Port 7:
check vapi queue ('free') at vapi_start_tone_chan:1427
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.530[app:dbg]Chan 7:
current state is CREATED
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.530[app:dbg]Port 7:
set vapi queue MSP to 'busy' with 'start_tone' at
vapi_start_tone_chan:1464
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.530[app:dbg]VQ Conn
7 = MSP : 'start_tone' =
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.530[app:dbg]Conn 7,
tone config: tone_high: 425Hz, tone_low: 0Hz, tone_t_on1: 330ms,
tone_t_off1: 330ms, tone_t_on2: 0ms, tone_t_off2: 0ms
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.530[app:dbg]chan 7
start tone, id=22, direction=TDM
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.530[app:dbg]Port 7:
user port 1, old state busy, new state
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.530[app:dbg]Set port
7 led to state 'LED_ON'
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.530[app:dbg]pbx
-[msg_fxs_state]-> group
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.540[app:dbg]Delete
all RX-TX medias from SLIC 15
Aug 16 21:39:11 TAU-8 user.debug syslog:
21:39:11.530[app:dbg]vapi_cb_req: 7 0 result 0x00000000 requid
0x00000923
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.540[app:dbg]ITC:
[msg_fxs_state] -> group
Aug 16 21:39:11 TAU-8 user.debug syslog:
21:39:11.540[app:dbg]-----[GM] self_fxs_state()
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.540[app:dbg]Port 7:
new state is busy
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.540[app:dbg]regex ID
7: dial reset
Aug 16 21:39:11 TAU-8 user.debug syslog:
21:39:11.540[app:dbg]vapi_proc_event: VAPI_CB
Aug 16 21:39:11 TAU-8 user.debug syslog:
21:39:11.540[app:dbg]vapi_cb_chan: chan 7 reqest_id 0x00000923 result
0x00000000
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.540[app:dbg]Conn 7:
Start tone - Successfull
Aug 16 21:39:11 TAU-8 user.debug syslog: 21:39:11.540[app:dbg]Port 7:
check vapi queue ('busy''start_tone') at vapi_next_ops:2614
Aug 16 21:39:13 TAU-8 user.debug syslog: 21:39:13.220[app:dbg]slic7. Event 8.
Aug 16 21:39:13 TAU-8 user.debug syslog: 21:39:13.220[app:dbg]slic 7.
Pre-On-hook event
Aug 16 21:39:13 TAU-8 user.debug syslog: 21:39:13.220[app:dbg]HIO:
preonhook TDM port '7', port enabled 1
Aug 16 21:39:13 TAU-8 user.debug syslog:
21:39:13.220[app:dbg]CMD_STOP_TONE: port = 7
Aug 16 21:39:13 TAU-8 user.debug syslog: 21:39:13.220[app:dbg]Port 7:
check vapi queue ('free') at vapi_stop_tone_chan:1518
Aug 16 21:39:13 TAU-8 user.debug syslog: 21:39:13.220[app:dbg]Chan 7:
current state is CREATED
Aug 16 21:39:13 TAU-8 user.debug syslog: 21:39:13.220[app:dbg]Port 7:
set vapi queue MSP to 'busy' with 'stop_tone' at
vapi_stop_tone_chan:1564
Aug 16 21:39:13 TAU-8 user.debug syslog: 21:39:13.220[app:dbg]VQ Conn
7 = MSP : 'stop_tone' =
Aug 16 21:39:13 TAU-8 user.debug syslog:
21:39:13.220[app:dbg]vapi_cb_req: 7 0 result 0x00000000 requid
0x00000924
Aug 16 21:39:13 TAU-8 user.debug syslog: 21:39:13.220[app:dbg]chan 7 stop tone
Aug 16 21:39:13 TAU-8 user.debug syslog:
21:39:13.220[app:dbg]vapi_proc_event: VAPI_CB
Aug 16 21:39:13 TAU-8 user.debug syslog:
21:39:13.220[app:dbg]vapi_cb_chan: chan 7 reqest_id 0x00000924 result
0x00000000
Aug 16 21:39:13 TAU-8 user.debug syslog: 21:39:13.220[app:dbg]Conn 7:
Stop tone - Successfull
Aug 16 21:39:13 TAU-8 user.debug syslog: 21:39:13.220[app:dbg]Port 7:
check vapi queue ('busy''stop_tone') at vapi_next_ops:2614
Aug 16 21:39:13 TAU-8 user.debug syslog: 21:39:13.230[app:dbg]vapi:
generic event, code 2 <Tone Generation completed>, conn 7
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.010[app:dbg]slic7. Event 1.
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.010[app:dbg]slic 7.
On-hook event
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.010[app:dbg]Set port
7 led to state 'LED_OFF'
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.010[app:dbg]HIO:
onhook TDM port '7', port enabled 1
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.010[app:dbg]SLIC 7
(subs163_1001): onhook state: busy
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.010[app:dbg]regex ID
7: dial reset
Aug 16 21:39:14 TAU-8 user.info syslog: 21:39:14.010[app:info]SLIC 7:
from state 'busy' to state 'hangup'
Aug 16 21:39:14 TAU-8 user.debug syslog:
21:39:14.010[app:dbg]CMD_STOP_TONE: port = 7
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.010[app:dbg]Port 7:
check vapi queue ('free') at vapi_stop_tone_chan:1518
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.010[app:dbg]Chan 7:
current state is CREATED
Aug 16 21:39:14 TAU-8 user.err syslog: 21:39:14.010[app:ERR]chan 7: no
generated tones!
Aug 16 21:39:14 TAU-8 user.debug syslog:
21:39:14.010[app:dbg]vapi_chan.c:1554: conn 7 peek cmd 'no event' from
queue
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.010[app:dbg]Port 7:
check vapi queue ('free') at __cmd_engine:342
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.010[app:dbg]Port 7:
check vapi queue ('free') at vapi_next_ops:2614
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.010[app:dbg]SLIC 7: reset
Aug 16 21:39:14 TAU-8 user.debug syslog:
21:39:14.010[app:dbg]dump_port_calls() SLIC 7:
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.010[app:dbg]Q:NONE
Aug 16 21:39:14 TAU-8 user.debug syslog:
21:39:14.010[app:dbg]H:((nil),0x00000000,(nil),0)
W:((nil),0x00000000,(nil)) N:((nil),0x00000000,(nil))
H2:((nil),0x00000000,(nil))
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.010[app:dbg]Delete
all RX-TX medias from SLIC 7
Aug 16 21:39:14 TAU-8 user.debug syslog:
21:39:14.010[app:dbg]free_final_mx: final_mx was NULL for SLIC 7
Aug 16 21:39:14 TAU-8 user.debug syslog:
21:39:14.010[app:dbg]CMD_DESTROY_CONN: port = 7
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.010[app:dbg]Port 7:
check vapi queue ('free') at vapi_destroy_chan:906
Aug 16 21:39:14 TAU-8 user.debug syslog:
21:39:14.010[app:dbg]Destroying connection 7...
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.010[app:dbg]Chan 7:
current state is CREATED
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.010[app:dbg]Port 7:
set vapi queue MSP to 'busy' with 'destroy' at vapi_destroy_chan:932
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.020[app:dbg]VQ Conn
7 = MSP : 'destroy' =
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.020[app:dbg]Chan 7:
CREATED -> DESTROYING
Aug 16 21:39:14 TAU-8 user.debug syslog:
21:39:14.020[app:dbg]CMD_DESTROY_IPONLY_CONN: port = 7
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.020[app:dbg]Port 7:
check vapi queue ('busy''destroy') at vapi_destroy_chan:906
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.020[app:dbg]Clear
vapi queue of Port 7/chan 15
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.020[app:dbg]Port 7
put cmd 'destroy',cur 'destroy' to queue at (vapi_destroy_chan:913)
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.020[app:dbg]VQ Conn
15 = MSP : 'destroy' =
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.020[app:dbg]VQ Conn
15 + 00 : 'destroy' (hold) + <-get_ptr
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.020[app:dbg]Port 7:
user port 1, old state hangup, new state
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.020[app:dbg]Set port
7 led to state 'LED_OFF'
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.020[app:dbg]pbx
-[msg_fxs_state]-> group
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.020[app:dbg]ITC:
[msg_fxs_state] -> group
Aug 16 21:39:14 TAU-8 user.debug syslog:
21:39:14.020[app:dbg]-----[GM] self_fxs_state()
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.020[app:dbg]Port 7:
new state is hangup
Aug 16 21:39:14 TAU-8 user.debug syslog:
21:39:14.020[app:dbg]dump_port_calls() SLIC 7:
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.020[app:dbg]Q:NONE
Aug 16 21:39:14 TAU-8 user.debug syslog:
21:39:14.020[app:dbg]H:((nil),0x00000000,(nil),0)
W:((nil),0x00000000,(nil)) N:((nil),0x00000000,(nil))
H2:((nil),0x00000000,(nil))
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.020[app:dbg]Set port
7 led to state 'LED_OFF'
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.020[app:dbg]Delete
all RX-TX medias from SLIC 15
Aug 16 21:39:14 TAU-8 user.debug syslog:
21:39:14.020[app:dbg]vapi_cb_req: 7 0 result 0x00000000 requid
0x0000014c
Aug 16 21:39:14 TAU-8 user.debug syslog:
21:39:14.030[app:dbg]vapi_proc_event: VAPI_CB
Aug 16 21:39:14 TAU-8 user.debug syslog:
21:39:14.030[app:dbg]vapi_cb_chan: chan 7 reqest_id 0x0000014c result
0x00000000
Aug 16 21:39:14 TAU-8 user.debug syslog:
21:39:14.030[app:dbg]vapi_cb_req: 7 0 result 0x00000000 requid
0x00000103
Aug 16 21:39:14 TAU-8 user.debug syslog:
21:39:14.030[app:dbg]vapi_proc_event: VAPI_CB
Aug 16 21:39:14 TAU-8 user.debug syslog:
21:39:14.030[app:dbg]vapi_cb_chan: chan 7 reqest_id 0x00000103 result
0x00000000
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.030[app:dbg]Conn 7 destroyed
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.030[app:dbg]Chan 7:
DESTROYING -> INITIAL
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.030[app:dbg]Port 7:
check vapi queue ('busy''destroy') at vapi_next_ops:2614
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.030[app:dbg]Port 7
get cmd 'destroy' from queue at (vapi_next_ops:2633)
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.030[app:dbg]Port 7:
check vapi queue ('free') at vapi_destroy_chan:906
Aug 16 21:39:14 TAU-8 user.debug syslog:
21:39:14.030[app:dbg]Destroying connection 15...
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.030[app:dbg]Chan 15:
current state is INITIAL
Aug 16 21:39:14 TAU-8 user.err syslog:
21:39:14.030[app:ERR]vapi_destroy_chan() chan 15: current state
initial: duplicate destroying connection!
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.030[app:dbg]Port 7:
check vapi queue ('free') at vapi_next_ops:2776
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.030[app:dbg]Port 7:
check vapi queue ('free') at vapi_next_ops:2614
Aug 16 21:39:14 TAU-8 user.debug syslog: 21:39:14.040[app:dbg]Delete
all RX-TX medias from SLIC 7[/spoiler]

[Dmitriy_eltex]

Здравствуйте.

Общались с Вами по телефону.
Дело в том, что в плане нумерации нет ни одного префикса:

Код: Выделить всё

Aug 16 21:39:11 TAU-8 user.err syslog: 21:39:11.530[app:ERR]SLIC 7: no routes found / L timers expired
Aug 16 21:39:11 TAU-8 user.info syslog: 21:39:11.530[app:info]SLIC 7: from state 'dial' to state 'busy'


Нужно задать план нумерации, подробнее тут:
http://kcs.eltex.nsk.ru/articles/104

[GroznovEgor]

Не отписал вчера, но с планом нумерации xxxxxx|7xxxxxxxxxx|8xxxxxxxxxx|810X. всё заработало стабильно. Спасибо за помощь.

[ivan_09]

Добрый день, возникла проблема после заливки обновления 2.3.0.22, не могу зайти в настройки, есть совет?

[GaMiR]

Добрый день!

Добрый день, возникла проблема после заливки обновления 2.3.0.22, не могу зайти в настройки, есть совет?

Если проблемы с отображением в WEB, то нужно почистить кэш в браузере.
Если недоступен WEB (потеряли/забыли IP адрес), можно воспользоваться "ПРИЛОЖЕНИЕ 1. ИСПОЛЬЗОВАНИЕ ГОЛОСОВОГО МЕНЮ ДЛЯ НАСТРОЙКИ ШЛЮЗА"
http://eltex-co.ru/upload/iblock/1b1/ta ... _admin.pdf
Забыли логин/пароль для управления, то только аппаратный сброс ("1.8 Сброс к заводским настройкам")

[nadir]

Добрый всем день.
Я думаю мой вопрос уместен в этой ветке.
Вопрос по использованию голосового меню для настройки шлюза TAU-8.IP.
Получается, что любой абонент выполнив процедуру входа в голосовое меню может сбросить все мои настройки и собственно порушить связь ?
Можно такую процедуру как-то запретить, что бы такого не произошло ?
Заранее спасибо.

[Dmitriy_eltex]

Добрый всем день.
Я думаю мой вопрос уместен в этой ветке.
Вопрос по использованию голосового меню для настройки шлюза TAU-8.IP.
Получается, что любой абонент выполнив процедуру входа в голосовое меню может сбросить все мои настройки и собственно порушить связь ?
Можно такую процедуру как-то запретить, что бы такого не произошло ?
Заранее спасибо.

Здравствуйте.

Уже отвечал Вам по почте:
Голосовое меню сейчас на всех портах и отключить его нельзя.
Одной из основной задачи этого функционала - помощь в получении доступа к устройству, когда шлюз недоступен.

"Получается, что абонент может вывести из строя сегмент VoIP, к которому он подключён, и администратор не узнает даже, с какого порта это было сделано? Как этого избежать?"

Если сильно захотеть можно поломать все что угодно и с "защитой от дурака".
Поэтому Ваши переживания приувеличены, такой функционал уже есть давно и не только на наших шлюзах,
на Cisco/Linksys, Audiocodes он тоже есть и никто не жалуется.